This makes some small changes to the XD60 configuration. Also moves Eagleheardt's base keymap.pull/1549/head^2
Ryan Sullivan
8 years ago
committed by
Jack Humbert
parent
d2e24354e1
commit
aa660d61ea
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,82 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER 大橘子外设 (Large orange peripherals)
|
||||
#define PRODUCT Org60
|
||||
#define DESCRIPTION Org60 Keyboard PCB by 大橘子外设 (Large orange peripherals)
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 14
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* Backlight Setup */
|
||||
#define BACKLIGHT_PIN F5
|
||||
#define BACKLIGHT_LEVELS 6
|
||||
//#define BACKLIGHT_BREATHING
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* RGB Underglow
|
||||
* F6 PIN for Org60 that has pre-soldered WS2812 LEDs
|
||||
*/
|
||||
#define RGB_DI_PIN F6
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 20 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
#define TAPPING_TERM 200
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,19 @@
|
||||
#include "org60.h"
|
||||
|
||||
|
||||
extern inline void org60_caps_led_on(void);
|
||||
extern inline void org60_bl_led_on(void);
|
||||
|
||||
extern inline void org60_caps_led_off(void);
|
||||
extern inline void org60_bl_led_off(void);
|
||||
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
org60_caps_led_on();
|
||||
} else {
|
||||
org60_caps_led_off();
|
||||
}
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
@ -0,0 +1,37 @@
|
||||
#ifndef Org60_H
|
||||
#define Org60_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "led.h"
|
||||
|
||||
/* Org60 LEDs
|
||||
* GPIO pads
|
||||
* 0 F7 not connected
|
||||
* 1 F6 RGB PWM Underglow
|
||||
* 2 F5 Backlight LED
|
||||
* 3 F4 not connected
|
||||
* B2 Capslock LED
|
||||
* B0 not connected
|
||||
*/
|
||||
inline void org60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
|
||||
inline void org60_bl_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
|
||||
|
||||
inline void org60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
|
||||
inline void org60_bl_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
|
||||
|
||||
/* Org60 Keymap Definition Macro */
|
||||
#define KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K47, K3D, K3C, \
|
||||
K40, K41, K42, K45, K4A, K4B, K48, K4C, K4D \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
|
||||
{ K40, K41, K42, KC_NO,KC_NO,K45, KC_NO,K47, K48, K49, K4A, K4B, K4C, K4D } \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,21 @@
|
||||
# QMK Firmware for 大橘子外设 (Large Orange Peripheral)'s 60% Org60 PCB
|
||||
|
||||
|
||||
|
||||
|
||||
## Quantum MK Firmware
|
||||
For the full Quantum feature list, see [the parent readme.md](/readme.md).
|
||||
|
||||
|
||||
## Additional Notes
|
||||
The Org60 seems to be a variant of the XD60 (which is essentially a GH60 rev. C, with support for a right-hand arrow cluster), which has USB-C and built-in RGB underlighting.
|
||||
|
||||
Compatibility with GH60 expansion boards is unknown.
|
||||
|
||||
Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting.
|
||||
|
||||
Default keymap included, matching configuration on sale page.
|
||||
|
||||
|
||||
## Build
|
||||
To build the default keymap, simply run `make org60-default`.
|
||||
@ -0,0 +1,64 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# LUFA specific
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
@ -1,46 +0,0 @@
|
||||
#include "xd60.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
// 0: Base Layer
|
||||
KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC , KC_NO, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_NO, KC_RSFT ,KC_UP, KC_DEL, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT),
|
||||
|
||||
// 1: Function Layer
|
||||
KEYMAP(
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \
|
||||
KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \
|
||||
KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \
|
||||
KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_RSFT, KC_NO ,KC_PGUP, KC_INS, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END),
|
||||
|
||||
};
|
||||
|
||||
// Custom Actions
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
|
||||
};
|
||||
|
||||
// Macros
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) { register_code(KC_RSFT); }
|
||||
else { unregister_code(KC_RSFT); }
|
||||
break;
|
||||
}
|
||||
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
// Loop
|
||||
void matrix_scan_user(void) {
|
||||
// Empty
|
||||
};
|
||||
@ -1,5 +0,0 @@
|
||||
|
||||
|
||||
All of the keys which CAN have a function should be assigned one.
|
||||
|
||||
The keys with KC_NO cannot be assigned a value
|
||||
Loading…
Reference in new issue