From acd3e79add2d47ab664b831936e5b6e71d3b8e15 Mon Sep 17 00:00:00 2001 From: yiancar Date: Thu, 16 May 2019 05:09:36 +0100 Subject: [PATCH] NK65 Addition (#5865) * Nk65 initial commit * Minor fix for compatibility * Make everything pretty * Update keyboards/nk65/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/nk65/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Chmod Dummy * Update getting_started_introduction.md * Revert "Update getting_started_introduction.md" This reverts commit daf446acf7ae4ae00488b389ce04f2cfca708d44. --- drivers/issi/is31fl3733.c | 38 +- drivers/issi/is31fl3733.h | 6 +- .../nk65/boards/GENERIC_STM32_F303XC/board.c | 126 + .../nk65/boards/GENERIC_STM32_F303XC/board.h | 1187 +++++++ .../nk65/boards/GENERIC_STM32_F303XC/board.mk | 5 + keyboards/nk65/bootloader_defs.h | 7 + keyboards/nk65/chconf.h | 520 +++ keyboards/nk65/config.h | 154 + keyboards/nk65/halconf.h | 388 +++ keyboards/nk65/info.json | 12 + keyboards/nk65/keymaps/default/keymap.c | 58 + keyboards/nk65/keymaps/default/readme.md | 6 + keyboards/nk65/keymaps/default_via/keymap.c | 58 + keyboards/nk65/keymaps/default_via/readme.md | 6 + keyboards/nk65/keymaps/default_via/rules.mk | 67 + keyboards/nk65/mcuconf.h | 257 ++ keyboards/nk65/nk65.c | 18 + keyboards/nk65/nk65.h | 38 + keyboards/nk65/readme.md | 37 + keyboards/nk65/rules.mk | 69 + keyboards/zeal60/rgb_backlight.c | 2968 +++++++++-------- quantum/led_matrix_drivers.c | 8 +- quantum/rgb_matrix_drivers.c | 8 +- 23 files changed, 4644 insertions(+), 1397 deletions(-) create mode 100755 keyboards/nk65/boards/GENERIC_STM32_F303XC/board.c create mode 100755 keyboards/nk65/boards/GENERIC_STM32_F303XC/board.h create mode 100755 keyboards/nk65/boards/GENERIC_STM32_F303XC/board.mk create mode 100755 keyboards/nk65/bootloader_defs.h create mode 100755 keyboards/nk65/chconf.h create mode 100755 keyboards/nk65/config.h create mode 100755 keyboards/nk65/halconf.h create mode 100755 keyboards/nk65/info.json create mode 100755 keyboards/nk65/keymaps/default/keymap.c create mode 100755 keyboards/nk65/keymaps/default/readme.md create mode 100755 keyboards/nk65/keymaps/default_via/keymap.c create mode 100755 keyboards/nk65/keymaps/default_via/readme.md create mode 100755 keyboards/nk65/keymaps/default_via/rules.mk create mode 100755 keyboards/nk65/mcuconf.h create mode 100755 keyboards/nk65/nk65.c create mode 100755 keyboards/nk65/nk65.h create mode 100755 keyboards/nk65/readme.md create mode 100755 keyboards/nk65/rules.mk diff --git a/drivers/issi/is31fl3733.c b/drivers/issi/is31fl3733.c index c18ed7ca30..aa247f4e8a 100644 --- a/drivers/issi/is31fl3733.c +++ b/drivers/issi/is31fl3733.c @@ -75,10 +75,10 @@ uint8_t g_twi_transfer_buffer[20]; // buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's // probably not worth the extra complexity. uint8_t g_pwm_buffer[DRIVER_COUNT][192]; -bool g_pwm_buffer_update_required = false; +bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false }; uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } }; -bool g_led_control_registers_update_required = false; +bool g_led_control_registers_update_required[DRIVER_COUNT] = { false }; void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data ) { @@ -123,12 +123,13 @@ void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ) } } -void IS31FL3733_init( uint8_t addr ) +void IS31FL3733_init( uint8_t addr, uint8_t sync) { // In order to avoid the LEDs being driven with garbage data // in the LED driver's PWM registers, shutdown is enabled last. // Set up the mode and other settings, clear the PWM registers, // then disable software shutdown. + // Sync is passed so set it according to the datasheet. // Unlock the command register. IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); @@ -161,7 +162,7 @@ void IS31FL3733_init( uint8_t addr ) // Set global current to maximum. IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF ); // Disable software shutdown. - IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 ); + IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01 ); // Wait 10ms to ensure the device has woken up. #ifdef __AVR__ @@ -179,7 +180,7 @@ void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; g_pwm_buffer[led.driver][led.b] = blue; - g_pwm_buffer_update_required = true; + g_pwm_buffer_update_required[led.driver] = true; } } @@ -218,35 +219,34 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); } - g_led_control_registers_update_required = true; + g_led_control_registers_update_required[led.driver] = true; } -void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ) +void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index ) { - if ( g_pwm_buffer_update_required ) + if ( g_pwm_buffer_update_required[index] ) { // Firstly we need to unlock the command register and select PG1 - IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); - IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM ); + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM ); - IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] ); - //IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] ); + IS31FL3733_write_pwm_buffer( addr, g_pwm_buffer[index] ); } - g_pwm_buffer_update_required = false; + g_pwm_buffer_update_required[index] = false; } -void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 ) +void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index ) { - if ( g_led_control_registers_update_required ) + if ( g_led_control_registers_update_required[index] ) { // Firstly we need to unlock the command register and select PG0 - IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); - IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL ); + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL ); for ( int i=0; i<24; i++ ) { - IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] ); - //IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] ); + IS31FL3733_write_register(addr, i, g_led_control_registers[index][i] ); } } + g_led_control_registers_update_required[index] = false; } diff --git a/drivers/issi/is31fl3733.h b/drivers/issi/is31fl3733.h index 3d23b188aa..e117b25460 100644 --- a/drivers/issi/is31fl3733.h +++ b/drivers/issi/is31fl3733.h @@ -32,7 +32,7 @@ typedef struct is31_led { extern const is31_led g_is31_leds[DRIVER_LED_TOTAL]; -void IS31FL3733_init( uint8_t addr ); +void IS31FL3733_init( uint8_t addr, uint8_t sync ); void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data ); void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ); @@ -45,8 +45,8 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b // (eg. from a timer interrupt). // Call this while idle (in between matrix scans). // If the buffer is dirty, it will update the driver with the buffer. -void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ); -void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 ); +void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index ); +void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index ); #define A_1 0x00 #define A_2 0x01 diff --git a/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.c b/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.c new file mode 100755 index 0000000000..4331155df4 --- /dev/null +++ b/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.c @@ -0,0 +1,126 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} +#endif +}; +#endif + +void enter_bootloader_mode_if_requested(void); + +/** + * @brief Early initialization code. + * @details This initialization must be performed just after stack setup + * and before any other initialization. + */ +void __early_init(void) { + enter_bootloader_mode_if_requested(); + stm32_clock_init(); +} + +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { +} diff --git a/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.h b/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.h new file mode 100755 index 0000000000..54df72ea68 --- /dev/null +++ b/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.h @@ -0,0 +1,1187 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for NK65 Keyboard + */ + +/* + * Board identifier. + */ +#define BOARD_GENERIC_STM32_F303XC +#define BOARD_NAME "NK65 PCB" + +/* + * Board oscillators-related settings. + * NOTE: LSE not fitted. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 0U +#endif + +#define STM32_LSEDRV (3U << 3U) + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 8000000U +#endif + +// #define STM32_HSE_BYPASS + +/* + * MCU type as defined in the ST header. + */ +#define STM32F303xC + +/* + * IO pins assignments. + */ +#define GPIOA_PIN0 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_PIN4 4U +#define GPIOA_PIN5 5U +#define GPIOA_PIN6 6U +#define GPIOA_PIN7 7U +#define GPIOA_PIN8 8U +#define GPIOA_PIN9 9U +#define GPIOA_PIN10 10U +#define GPIOA_USB_DM 11U +#define GPIOA_USB_DP 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_PIN3 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_PIN6 6U +#define GPIOB_PIN7 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_PIN0 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_PIN7 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_PIN14 14U +#define GPIOC_PIN15 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_PIN4 4U +#define GPIOD_PIN5 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_PIN12 12U +#define GPIOD_PIN13 13U +#define GPIOD_PIN14 14U +#define GPIOD_PIN15 15U + +#define GPIOE_PIN0 0U +#define GPIOE_PIN1 1U +#define GPIOE_PIN2 2U +#define GPIOE_PIN3 3U +#define GPIOE_PIN4 4U +#define GPIOE_PIN5 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_I2C2_SDA 0U +#define GPIOF_I2C2_SCL 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +#define GPIOG_PIN0 0U +#define GPIOG_PIN1 1U +#define GPIOG_PIN2 2U +#define GPIOG_PIN3 3U +#define GPIOG_PIN4 4U +#define GPIOG_PIN5 5U +#define GPIOG_PIN6 6U +#define GPIOG_PIN7 7U +#define GPIOG_PIN8 8U +#define GPIOG_PIN9 9U +#define GPIOG_PIN10 10U +#define GPIOG_PIN11 11U +#define GPIOG_PIN12 12U +#define GPIOG_PIN13 13U +#define GPIOG_PIN14 14U +#define GPIOG_PIN15 15U + +#define GPIOH_PIN0 0U +#define GPIOH_PIN1 1U +#define GPIOH_PIN2 2U +#define GPIOH_PIN3 3U +#define GPIOH_PIN4 4U +#define GPIOH_PIN5 5U +#define GPIOH_PIN6 6U +#define GPIOH_PIN7 7U +#define GPIOH_PIN8 8U +#define GPIOH_PIN9 9U +#define GPIOH_PIN10 10U +#define GPIOH_PIN11 11U +#define GPIOH_PIN12 12U +#define GPIOH_PIN13 13U +#define GPIOH_PIN14 14U +#define GPIOH_PIN15 15U + +/* + * IO lines assignments. + */ +#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) +#define LINE_USB_DM PAL_LINE(GPIOA, 11U) +#define LINE_USB_DP PAL_LINE(GPIOA, 12U) +#define LINE_SWDIO PAL_LINE(GPIOA, 13U) +#define LINE_SWCLK PAL_LINE(GPIOA, 14U) + +#define LINE_PIN6 PAL_LINE(GPIOF, 0U) +#define LINE_PIN7 PAL_LINE(GPIOF, 1U) + +#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U) + + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - NC + * PA1 - NC + * PA2 - COL1 + * PA3 - COL2 + * PA4 - SPEAKER1 + * PA5 - SPEAKER2 + * PA6 - COL3 + * PA7 - COL8 + * PA8 - COL6 + * PA9 - COL7 + * PA10 - ROW5 + * PA11 - USB_DM (alternate 14). + * PA12 - USB_DP (alternate 14). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - ROW4 + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ + PIN_MODE_ALTERNATE(GPIOA_PIN1) | \ + PIN_MODE_INPUT(GPIOA_PIN2) | \ + PIN_MODE_INPUT(GPIOA_PIN3) | \ + PIN_MODE_INPUT(GPIOA_PIN4) | \ + PIN_MODE_INPUT(GPIOA_PIN5) | \ + PIN_MODE_INPUT(GPIOA_PIN6) | \ + PIN_MODE_INPUT(GPIOA_PIN7) | \ + PIN_MODE_INPUT(GPIOA_PIN8) | \ + PIN_MODE_INPUT(GPIOA_PIN9) | \ + PIN_MODE_INPUT(GPIOA_PIN10) | \ + PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \ + PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_INPUT(GPIOA_PIN15)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ + PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ + PIN_OSPEED_HIGH(GPIOA_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ + PIN_OSPEED_HIGH(GPIOA_USB_DM) | \ + PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN15)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \ + PIN_PUPDR_FLOATING(GPIOA_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ + PIN_PUPDR_FLOATING(GPIOA_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ + PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ + PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ + PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN15)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ + PIN_ODR_HIGH(GPIOA_PIN1) | \ + PIN_ODR_HIGH(GPIOA_PIN2) | \ + PIN_ODR_HIGH(GPIOA_PIN3) | \ + PIN_ODR_HIGH(GPIOA_PIN4) | \ + PIN_ODR_HIGH(GPIOA_PIN5) | \ + PIN_ODR_HIGH(GPIOA_PIN6) | \ + PIN_ODR_HIGH(GPIOA_PIN7) | \ + PIN_ODR_HIGH(GPIOA_PIN8) | \ + PIN_ODR_HIGH(GPIOA_PIN9) | \ + PIN_ODR_HIGH(GPIOA_PIN10) | \ + PIN_ODR_HIGH(GPIOA_USB_DM) | \ + PIN_ODR_HIGH(GPIOA_USB_DP) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \ + PIN_AFIO_AF(GPIOA_PIN1, 1) | \ + PIN_AFIO_AF(GPIOA_PIN2, 0) | \ + PIN_AFIO_AF(GPIOA_PIN3, 0) | \ + PIN_AFIO_AF(GPIOA_PIN4, 0) | \ + PIN_AFIO_AF(GPIOA_PIN5, 5) | \ + PIN_AFIO_AF(GPIOA_PIN6, 5) | \ + PIN_AFIO_AF(GPIOA_PIN7, 5)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \ + PIN_AFIO_AF(GPIOA_PIN9, 0) | \ + PIN_AFIO_AF(GPIOA_PIN10, 0) | \ + PIN_AFIO_AF(GPIOA_USB_DM, 14) | \ + PIN_AFIO_AF(GPIOA_USB_DP, 14) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0) | \ + PIN_AFIO_AF(GPIOA_PIN15, 0)) + +/* + * GPIOB setup: + * + * PB0 - PIN0 (input pullup). + * PB1 - PIN1 (input pullup). + * PB2 - PIN2 (input pullup). + * PB3 - PIN3 (alternate 0). + * PB4 - PIN4 (input pullup). + * PB5 - PIN5 (input pullup). + * PB6 - PIN6 LSM303DLHC_SCL (alternate 4). + * PB7 - PIN7 LSM303DLHC_SDA (alternate 4). + * PB8 - PIN8 (input pullup). + * PB9 - PIN9 (input pullup). + * PB10 - PIN10 (input pullup). + * PB11 - PIN11 (input pullup). + * PB12 - PIN12 (input pullup). + * PB13 - PIN13 (input pullup). + * PB14 - PIN14 (input pullup). + * PB15 - PIN15 (input pullup). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_PIN3) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_ALTERNATE(GPIOB_PIN6) | \ + PIN_MODE_OUTPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_PIN9) | \ + PIN_MODE_INPUT(GPIOB_PIN10) | \ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ + PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ + PIN_OSPEED_HIGH(GPIOB_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN15)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_FLOATING(GPIOB_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_FLOATING(GPIOB_PIN6) | \ + PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ + PIN_ODR_HIGH(GPIOB_PIN1) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_HIGH(GPIOB_PIN3) | \ + PIN_ODR_HIGH(GPIOB_PIN4) | \ + PIN_ODR_HIGH(GPIOB_PIN5) | \ + PIN_ODR_HIGH(GPIOB_PIN6) | \ + PIN_ODR_LOW(GPIOB_PIN7) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_PIN9) | \ + PIN_ODR_HIGH(GPIOB_PIN10) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_PIN13) | \ + PIN_ODR_HIGH(GPIOB_PIN14) | \ + PIN_ODR_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0) | \ + PIN_AFIO_AF(GPIOB_PIN3, 0) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0) | \ + PIN_AFIO_AF(GPIOB_PIN6, 4) | \ + PIN_AFIO_AF(GPIOB_PIN7, 0)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \ + PIN_AFIO_AF(GPIOB_PIN9, 0) | \ + PIN_AFIO_AF(GPIOB_PIN10, 0) | \ + PIN_AFIO_AF(GPIOB_PIN11, 0) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0)) + +/* + * GPIOC setup: + * + * PC0 - PIN0 (input pullup). + * PC1 - PIN1 (input pullup). + * PC2 - PIN2 (input pullup). + * PC3 - PIN3 (input pullup). + * PC4 - PIN4 (input pullup). + * PC5 - PIN5 (input pullup). + * PC6 - PIN6 (input pullup). + * PC7 - PIN7 (input pullup). + * PC8 - PIN8 (input pullup). + * PC9 - PIN9 (input pullup). + * PC10 - PIN10 (input pullup). + * PC11 - PIN11 (input pullup). + * PC12 - PIN12 (input pullup). + * PC13 - PIN13 (input pullup). + * PC14 - PIN14 (input floating). + * PC15 - PIN15 (input floating). + */ +#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ + PIN_MODE_INPUT(GPIOC_PIN1) | \ + PIN_MODE_INPUT(GPIOC_PIN2) | \ + PIN_MODE_INPUT(GPIOC_PIN3) | \ + PIN_MODE_INPUT(GPIOC_PIN4) | \ + PIN_MODE_INPUT(GPIOC_PIN5) | \ + PIN_MODE_INPUT(GPIOC_PIN6) | \ + PIN_MODE_INPUT(GPIOC_PIN7) | \ + PIN_MODE_INPUT(GPIOC_PIN8) | \ + PIN_MODE_INPUT(GPIOC_PIN9) | \ + PIN_MODE_INPUT(GPIOC_PIN10) | \ + PIN_MODE_INPUT(GPIOC_PIN11) | \ + PIN_MODE_INPUT(GPIOC_PIN12) | \ + PIN_MODE_INPUT(GPIOC_PIN13) | \ + PIN_MODE_INPUT(GPIOC_PIN14) | \ + PIN_MODE_INPUT(GPIOC_PIN15)) +#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) +#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ + PIN_OSPEED_HIGH(GPIOC_PIN14) | \ + PIN_OSPEED_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ + PIN_PUPDR_FLOATING(GPIOC_PIN14) | \ + PIN_PUPDR_FLOATING(GPIOC_PIN15)) +#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ + PIN_ODR_HIGH(GPIOC_PIN1) | \ + PIN_ODR_HIGH(GPIOC_PIN2) | \ + PIN_ODR_HIGH(GPIOC_PIN3) | \ + PIN_ODR_HIGH(GPIOC_PIN4) | \ + PIN_ODR_HIGH(GPIOC_PIN5) | \ + PIN_ODR_HIGH(GPIOC_PIN6) | \ + PIN_ODR_HIGH(GPIOC_PIN7) | \ + PIN_ODR_HIGH(GPIOC_PIN8) | \ + PIN_ODR_HIGH(GPIOC_PIN9) | \ + PIN_ODR_HIGH(GPIOC_PIN10) | \ + PIN_ODR_HIGH(GPIOC_PIN11) | \ + PIN_ODR_HIGH(GPIOC_PIN12) | \ + PIN_ODR_HIGH(GPIOC_PIN13) | \ + PIN_ODR_HIGH(GPIOC_PIN14) | \ + PIN_ODR_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \ + PIN_AFIO_AF(GPIOC_PIN1, 0) | \ + PIN_AFIO_AF(GPIOC_PIN2, 0) | \ + PIN_AFIO_AF(GPIOC_PIN3, 0) | \ + PIN_AFIO_AF(GPIOC_PIN4, 0) | \ + PIN_AFIO_AF(GPIOC_PIN5, 0) | \ + PIN_AFIO_AF(GPIOC_PIN6, 0) | \ + PIN_AFIO_AF(GPIOC_PIN7, 0)) +#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \ + PIN_AFIO_AF(GPIOC_PIN9, 0) | \ + PIN_AFIO_AF(GPIOC_PIN10, 0) | \ + PIN_AFIO_AF(GPIOC_PIN11, 0) | \ + PIN_AFIO_AF(GPIOC_PIN12, 0) | \ + PIN_AFIO_AF(GPIOC_PIN13, 0) | \ + PIN_AFIO_AF(GPIOC_PIN14, 0) | \ + PIN_AFIO_AF(GPIOC_PIN15, 0)) + +/* + * GPIOD setup: + * + * PD0 - PIN0 (input pullup). + * PD1 - PIN1 (input pullup). + * PD2 - PIN2 (input pullup). + * PD3 - PIN3 (input pullup). + * PD4 - PIN4 (input pullup). + * PD5 - PIN5 (input pullup). + * PD6 - PIN6 (input pullup). + * PD7 - PIN7 (input pullup). + * PD8 - PIN8 (input pullup). + * PD9 - PIN9 (input pullup). + * PD11 - PIN10 (input pullup). + * PD11 - PIN11 (input pullup). + * PD12 - PIN12 (input pullup). + * PD13 - PIN13 (input pullup). + * PD14 - PIN14 (input pullup). + * PD15 - PIN15 (input pullup). + */ +#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ + PIN_MODE_INPUT(GPIOD_PIN1) | \ + PIN_MODE_INPUT(GPIOD_PIN2) | \ + PIN_MODE_INPUT(GPIOD_PIN3) | \ + PIN_MODE_INPUT(GPIOD_PIN4) | \ + PIN_MODE_INPUT(GPIOD_PIN5) | \ + PIN_MODE_INPUT(GPIOD_PIN6) | \ + PIN_MODE_INPUT(GPIOD_PIN7) | \ + PIN_MODE_INPUT(GPIOD_PIN8) | \ + PIN_MODE_INPUT(GPIOD_PIN9) | \ + PIN_MODE_INPUT(GPIOD_PIN10) | \ + PIN_MODE_INPUT(GPIOD_PIN11) | \ + PIN_MODE_INPUT(GPIOD_PIN12) | \ + PIN_MODE_INPUT(GPIOD_PIN13) | \ + PIN_MODE_INPUT(GPIOD_PIN14) | \ + PIN_MODE_INPUT(GPIOD_PIN15)) +#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) +#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN15)) +#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN15)) +#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ + PIN_ODR_HIGH(GPIOD_PIN1) | \ + PIN_ODR_HIGH(GPIOD_PIN2) | \ + PIN_ODR_HIGH(GPIOD_PIN3) | \ + PIN_ODR_HIGH(GPIOD_PIN4) | \ + PIN_ODR_HIGH(GPIOD_PIN5) | \ + PIN_ODR_HIGH(GPIOD_PIN6) | \ + PIN_ODR_HIGH(GPIOD_PIN7) | \ + PIN_ODR_HIGH(GPIOD_PIN8) | \ + PIN_ODR_HIGH(GPIOD_PIN9) | \ + PIN_ODR_HIGH(GPIOD_PIN10) | \ + PIN_ODR_HIGH(GPIOD_PIN11) | \ + PIN_ODR_HIGH(GPIOD_PIN12) | \ + PIN_ODR_HIGH(GPIOD_PIN13) | \ + PIN_ODR_HIGH(GPIOD_PIN14) | \ + PIN_ODR_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \ + PIN_AFIO_AF(GPIOD_PIN1, 0) | \ + PIN_AFIO_AF(GPIOD_PIN2, 0) | \ + PIN_AFIO_AF(GPIOD_PIN3, 0) | \ + PIN_AFIO_AF(GPIOD_PIN4, 0) | \ + PIN_AFIO_AF(GPIOD_PIN5, 0) | \ + PIN_AFIO_AF(GPIOD_PIN6, 0) | \ + PIN_AFIO_AF(GPIOD_PIN7, 0)) +#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \ + PIN_AFIO_AF(GPIOD_PIN9, 0) | \ + PIN_AFIO_AF(GPIOD_PIN10, 0) | \ + PIN_AFIO_AF(GPIOD_PIN11, 0) | \ + PIN_AFIO_AF(GPIOD_PIN12, 0) | \ + PIN_AFIO_AF(GPIOD_PIN13, 0) | \ + PIN_AFIO_AF(GPIOD_PIN14, 0) | \ + PIN_AFIO_AF(GPIOD_PIN15, 0)) + +/* + * GPIOE setup: + * + * PE0 - PIN0 (input pullup). + * PE1 - PIN1 (input pullup). + * PE2 - PIN2 (input pullup). + * PE3 - PIN3 L3GD20_CS (output pushpull maximum). + * PE4 - PIN4 (input pullup). + * PE5 - PIN5 (input pullup). + * PE6 - PIN6 (input pullup). + * PE7 - PIN7 (input pullup). + * PE8 - PIN8 (output pushpull maximum). + * PE9 - PIN9 (output pushpull maximum). + * PE10 - PIN10 (output pushpull maximum). + * PE11 - PIN11 (output pushpull maximum). + * PE12 - PIN12 (output pushpull maximum). + * PE13 - PIN13 (output pushpull maximum). + * PE14 - PIN14 (output pushpull maximum). + * PE15 - PIN15 (output pushpull maximum). + */ +#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ + PIN_MODE_INPUT(GPIOE_PIN1) | \ + PIN_MODE_INPUT(GPIOE_PIN2) |\ + PIN_MODE_OUTPUT(GPIOE_PIN3) | \ + PIN_MODE_INPUT(GPIOE_PIN4) |\ + PIN_MODE_INPUT(GPIOE_PIN5) |\ + PIN_MODE_INPUT(GPIOE_PIN6) | \ + PIN_MODE_INPUT(GPIOE_PIN7) | \ + PIN_MODE_OUTPUT(GPIOE_PIN8) | \ + PIN_MODE_OUTPUT(GPIOE_PIN9) | \ + PIN_MODE_OUTPUT(GPIOE_PIN10) | \ + PIN_MODE_OUTPUT(GPIOE_PIN11) | \ + PIN_MODE_OUTPUT(GPIOE_PIN12) | \ + PIN_MODE_OUTPUT(GPIOE_PIN13) | \ + PIN_MODE_OUTPUT(GPIOE_PIN14) | \ + PIN_MODE_OUTPUT(GPIOE_PIN15)) +#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) +#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\ + PIN_OSPEED_HIGH(GPIOE_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ + PIN_OSPEED_HIGH(GPIOE_PIN8) | \ + PIN_OSPEED_HIGH(GPIOE_PIN9) | \ + PIN_OSPEED_HIGH(GPIOE_PIN10) | \ + PIN_OSPEED_HIGH(GPIOE_PIN11) | \ + PIN_OSPEED_HIGH(GPIOE_PIN12) | \ + PIN_OSPEED_HIGH(GPIOE_PIN13) | \ + PIN_OSPEED_HIGH(GPIOE_PIN14) | \ + PIN_OSPEED_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN2) |\ + PIN_PUPDR_FLOATING(GPIOE_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN4) |\ + PIN_PUPDR_PULLUP(GPIOE_PIN5) |\ + PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN13) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN14) |\ + PIN_PUPDR_FLOATING(GPIOE_PIN15)) +#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ + PIN_ODR_HIGH(GPIOE_PIN1) | \ + PIN_ODR_HIGH(GPIOE_PIN2) | \ + PIN_ODR_HIGH(GPIOE_PIN3) | \ + PIN_ODR_HIGH(GPIOE_PIN4) | \ + PIN_ODR_HIGH(GPIOE_PIN5) | \ + PIN_ODR_HIGH(GPIOE_PIN6) | \ + PIN_ODR_HIGH(GPIOE_PIN7) | \ + PIN_ODR_LOW(GPIOE_PIN8) | \ + PIN_ODR_LOW(GPIOE_PIN9) | \ + PIN_ODR_LOW(GPIOE_PIN10) | \ + PIN_ODR_LOW(GPIOE_PIN11) | \ + PIN_ODR_LOW(GPIOE_PIN12) | \ + PIN_ODR_LOW(GPIOE_PIN13) | \ + PIN_ODR_LOW(GPIOE_PIN14) | \ + PIN_ODR_LOW(GPIOE_PIN15)) +#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \ + PIN_AFIO_AF(GPIOE_PIN1, 0) | \ + PIN_AFIO_AF(GPIOE_PIN2, 0) |\ + PIN_AFIO_AF(GPIOE_PIN3, 0) | \ + PIN_AFIO_AF(GPIOE_PIN4, 0) |\ + PIN_AFIO_AF(GPIOE_PIN5, 0) |\ + PIN_AFIO_AF(GPIOE_PIN6, 0) | \ + PIN_AFIO_AF(GPIOE_PIN7, 0)) +#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \ + PIN_AFIO_AF(GPIOE_PIN9, 0) | \ + PIN_AFIO_AF(GPIOE_PIN10, 0) | \ + PIN_AFIO_AF(GPIOE_PIN11, 0) | \ + PIN_AFIO_AF(GPIOE_PIN12, 0) | \ + PIN_AFIO_AF(GPIOE_PIN13, 0) | \ + PIN_AFIO_AF(GPIOE_PIN14, 0) | \ + PIN_AFIO_AF(GPIOE_PIN15, 0)) + +/* + * GPIOF setup: + * + * PF0 - I2C2_SDA (input floating). + * PF1 - I2C2_SCL (input floating). + * PF2 - PIN2 (input pullup). + * PF3 - PIN3 (input pullup). + * PF4 - PIN4 (input pullup). + * PF5 - PIN5 (input pullup). + * PF6 - PIN6 (input pullup). + * PF7 - PIN7 (input pullup). + * PF8 - PIN8 (input pullup). + * PF9 - PIN9 (input pullup). + * PF10 - PIN10 (input pullup). + * PF11 - PIN11 (input pullup). + * PF12 - PIN12 (input pullup). + * PF13 - PIN13 (input pullup). + * PF14 - PIN14 (input pullup). + * PF15 - PIN15 (input pullup). + */ +#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \ + PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \ + PIN_MODE_INPUT(GPIOF_PIN2) | \ + PIN_MODE_INPUT(GPIOF_PIN3) | \ + PIN_MODE_INPUT(GPIOF_PIN4) | \ + PIN_MODE_INPUT(GPIOF_PIN5) | \ + PIN_MODE_INPUT(GPIOF_PIN6) | \ + PIN_MODE_INPUT(GPIOF_PIN7) | \ + PIN_MODE_INPUT(GPIOF_PIN8) | \ + PIN_MODE_INPUT(GPIOF_PIN9) | \ + PIN_MODE_INPUT(GPIOF_PIN10) | \ + PIN_MODE_INPUT(GPIOF_PIN11) | \ + PIN_MODE_INPUT(GPIOF_PIN12) | \ + PIN_MODE_INPUT(GPIOF_PIN13) | \ + PIN_MODE_INPUT(GPIOF_PIN14) | \ + PIN_MODE_INPUT(GPIOF_PIN15)) +#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \ + PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) +#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \ + PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN15)) +#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \ + PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN15)) +#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \ + PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \ + PIN_ODR_HIGH(GPIOF_PIN2) | \ + PIN_ODR_HIGH(GPIOF_PIN3) | \ + PIN_ODR_HIGH(GPIOF_PIN4) | \ + PIN_ODR_HIGH(GPIOF_PIN5) | \ + PIN_ODR_HIGH(GPIOF_PIN6) | \ + PIN_ODR_HIGH(GPIOF_PIN7) | \ + PIN_ODR_HIGH(GPIOF_PIN8) | \ + PIN_ODR_HIGH(GPIOF_PIN9) | \ + PIN_ODR_HIGH(GPIOF_PIN10) | \ + PIN_ODR_HIGH(GPIOF_PIN11) | \ + PIN_ODR_HIGH(GPIOF_PIN12) | \ + PIN_ODR_HIGH(GPIOF_PIN13) | \ + PIN_ODR_HIGH(GPIOF_PIN14) | \ + PIN_ODR_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \ + PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \ + PIN_AFIO_AF(GPIOF_PIN2, 0) | \ + PIN_AFIO_AF(GPIOF_PIN3, 0) | \ + PIN_AFIO_AF(GPIOF_PIN4, 0) | \ + PIN_AFIO_AF(GPIOF_PIN5, 0) | \ + PIN_AFIO_AF(GPIOF_PIN6, 0) | \ + PIN_AFIO_AF(GPIOF_PIN7, 0)) +#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \ + PIN_AFIO_AF(GPIOF_PIN9, 0) | \ + PIN_AFIO_AF(GPIOF_PIN10, 0) | \ + PIN_AFIO_AF(GPIOF_PIN11, 0) | \ + PIN_AFIO_AF(GPIOF_PIN12, 0) | \ + PIN_AFIO_AF(GPIOF_PIN13, 0) | \ + PIN_AFIO_AF(GPIOF_PIN14, 0) | \ + PIN_AFIO_AF(GPIOF_PIN15, 0)) + +/* + * GPIOG setup: + * + * PG0 - PIN0 (input pullup). + * PG1 - PIN1 (input pullup). + * PG2 - PIN2 (input pullup). + * PG3 - PIN3 (input pullup). + * PG4 - PIN4 (input pullup). + * PG5 - PIN5 (input pullup). + * PG6 - PIN6 (input pullup). + * PG7 - PIN7 (input pullup). + * PG8 - PIN8 (input pullup). + * PG9 - PIN9 (input pullup). + * PG10 - PIN10 (input pullup). + * PG11 - PIN11 (input pullup). + * PG12 - PIN12 (input pullup). + * PG13 - PIN13 (input pullup). + * PG14 - PIN14 (input pullup). + * PG15 - PIN15 (input pullup). + */ +#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ + PIN_MODE_INPUT(GPIOG_PIN1) | \ + PIN_MODE_INPUT(GPIOG_PIN2) | \ + PIN_MODE_INPUT(GPIOG_PIN3) | \ + PIN_MODE_INPUT(GPIOG_PIN4) | \ + PIN_MODE_INPUT(GPIOG_PIN5) | \ + PIN_MODE_INPUT(GPIOG_PIN6) | \ + PIN_MODE_INPUT(GPIOG_PIN7) | \ + PIN_MODE_INPUT(GPIOG_PIN8) | \ + PIN_MODE_INPUT(GPIOG_PIN9) | \ + PIN_MODE_INPUT(GPIOG_PIN10) | \ + PIN_MODE_INPUT(GPIOG_PIN11) | \ + PIN_MODE_INPUT(GPIOG_PIN12) | \ + PIN_MODE_INPUT(GPIOG_PIN13) | \ + PIN_MODE_INPUT(GPIOG_PIN14) | \ + PIN_MODE_INPUT(GPIOG_PIN15)) +#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) +#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN15)) +#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN15)) +#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ + PIN_ODR_HIGH(GPIOG_PIN1) | \ + PIN_ODR_HIGH(GPIOG_PIN2) | \ + PIN_ODR_HIGH(GPIOG_PIN3) | \ + PIN_ODR_HIGH(GPIOG_PIN4) | \ + PIN_ODR_HIGH(GPIOG_PIN5) | \ + PIN_ODR_HIGH(GPIOG_PIN6) | \ + PIN_ODR_HIGH(GPIOG_PIN7) | \ + PIN_ODR_HIGH(GPIOG_PIN8) | \ + PIN_ODR_HIGH(GPIOG_PIN9) | \ + PIN_ODR_HIGH(GPIOG_PIN10) | \ + PIN_ODR_HIGH(GPIOG_PIN11) | \ + PIN_ODR_HIGH(GPIOG_PIN12) | \ + PIN_ODR_HIGH(GPIOG_PIN13) | \ + PIN_ODR_HIGH(GPIOG_PIN14) | \ + PIN_ODR_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \ + PIN_AFIO_AF(GPIOG_PIN1, 0) | \ + PIN_AFIO_AF(GPIOG_PIN2, 0) | \ + PIN_AFIO_AF(GPIOG_PIN3, 0) | \ + PIN_AFIO_AF(GPIOG_PIN4, 0) | \ + PIN_AFIO_AF(GPIOG_PIN5, 0) | \ + PIN_AFIO_AF(GPIOG_PIN6, 0) | \ + PIN_AFIO_AF(GPIOG_PIN7, 0)) +#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \ + PIN_AFIO_AF(GPIOG_PIN9, 0) | \ + PIN_AFIO_AF(GPIOG_PIN10, 0) | \ + PIN_AFIO_AF(GPIOG_PIN11, 0) | \ + PIN_AFIO_AF(GPIOG_PIN12, 0) | \ + PIN_AFIO_AF(GPIOG_PIN13, 0) | \ + PIN_AFIO_AF(GPIOG_PIN14, 0) | \ + PIN_AFIO_AF(GPIOG_PIN15, 0)) + +/* + * GPIOH setup: + * + * PH0 - PIN0 (input pullup). + * PH1 - PIN1 (input pullup). + * PH2 - PIN2 (input pullup). + * PH3 - PIN3 (input pullup). + * PH4 - PIN4 (input pullup). + * PH5 - PIN5 (input pullup). + * PH6 - PIN6 (input pullup). + * PH7 - PIN7 (input pullup). + * PH8 - PIN8 (input pullup). + * PH9 - PIN9 (input pullup). + * PH10 - PIN10 (input pullup). + * PH11 - PIN11 (input pullup). + * PH12 - PIN12 (input pullup). + * PH13 - PIN13 (input pullup). + * PH14 - PIN14 (input pullup). + * PH15 - PIN15 (input pullup). + */ +#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \ + PIN_MODE_INPUT(GPIOH_PIN1) | \ + PIN_MODE_INPUT(GPIOH_PIN2) | \ + PIN_MODE_INPUT(GPIOH_PIN3) | \ + PIN_MODE_INPUT(GPIOH_PIN4) | \ + PIN_MODE_INPUT(GPIOH_PIN5) | \ + PIN_MODE_INPUT(GPIOH_PIN6) | \ + PIN_MODE_INPUT(GPIOH_PIN7) | \ + PIN_MODE_INPUT(GPIOH_PIN8) | \ + PIN_MODE_INPUT(GPIOH_PIN9) | \ + PIN_MODE_INPUT(GPIOH_PIN10) | \ + PIN_MODE_INPUT(GPIOH_PIN11) | \ + PIN_MODE_INPUT(GPIOH_PIN12) | \ + PIN_MODE_INPUT(GPIOH_PIN13) | \ + PIN_MODE_INPUT(GPIOH_PIN14) | \ + PIN_MODE_INPUT(GPIOH_PIN15)) +#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) +#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN15)) +#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN15)) +#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \ + PIN_ODR_HIGH(GPIOH_PIN1) | \ + PIN_ODR_HIGH(GPIOH_PIN2) | \ + PIN_ODR_HIGH(GPIOH_PIN3) | \ + PIN_ODR_HIGH(GPIOH_PIN4) | \ + PIN_ODR_HIGH(GPIOH_PIN5) | \ + PIN_ODR_HIGH(GPIOH_PIN6) | \ + PIN_ODR_HIGH(GPIOH_PIN7) | \ + PIN_ODR_HIGH(GPIOH_PIN8) | \ + PIN_ODR_HIGH(GPIOH_PIN9) | \ + PIN_ODR_HIGH(GPIOH_PIN10) | \ + PIN_ODR_HIGH(GPIOH_PIN11) | \ + PIN_ODR_HIGH(GPIOH_PIN12) | \ + PIN_ODR_HIGH(GPIOH_PIN13) | \ + PIN_ODR_HIGH(GPIOH_PIN14) | \ + PIN_ODR_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \ + PIN_AFIO_AF(GPIOH_PIN1, 0) | \ + PIN_AFIO_AF(GPIOH_PIN2, 0) | \ + PIN_AFIO_AF(GPIOH_PIN3, 0) | \ + PIN_AFIO_AF(GPIOH_PIN4, 0) | \ + PIN_AFIO_AF(GPIOH_PIN5, 0) | \ + PIN_AFIO_AF(GPIOH_PIN6, 0) | \ + PIN_AFIO_AF(GPIOH_PIN7, 0)) +#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \ + PIN_AFIO_AF(GPIOH_PIN9, 0) | \ + PIN_AFIO_AF(GPIOH_PIN10, 0) | \ + PIN_AFIO_AF(GPIOH_PIN11, 0) | \ + PIN_AFIO_AF(GPIOH_PIN12, 0) | \ + PIN_AFIO_AF(GPIOH_PIN13, 0) | \ + PIN_AFIO_AF(GPIOH_PIN14, 0) | \ + PIN_AFIO_AF(GPIOH_PIN15, 0)) + + +/* + * USB bus activation macro, required by the USB driver. + */ +// #define usb_lld_connect_bus(usbp) +#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14))) +// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT) +/* + * USB bus de-activation macro, required by the USB driver. + */ +// #define usb_lld_disconnect_bus(usbp) +#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP) +// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12) + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ diff --git a/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.mk b/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.mk new file mode 100755 index 0000000000..43377629a3 --- /dev/null +++ b/keyboards/nk65/boards/GENERIC_STM32_F303XC/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC diff --git a/keyboards/nk65/bootloader_defs.h b/keyboards/nk65/bootloader_defs.h new file mode 100755 index 0000000000..3b0e9d20a6 --- /dev/null +++ b/keyboards/nk65/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * /tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/keyboards/nk65/chconf.h b/keyboards/nk65/chconf.h new file mode 100755 index 0000000000..1d9f12ff1f --- /dev/null +++ b/keyboards/nk65/chconf.h @@ -0,0 +1,520 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/nk65/config.h b/keyboards/nk65/config.h new file mode 100755 index 0000000000..0edb1bb62e --- /dev/null +++ b/keyboards/nk65/config.h @@ -0,0 +1,154 @@ +/* +Copyright 2019 Yiancar + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x8968 +#define PRODUCT_ID 0x4E4B +#define DEVICE_VER 0x0001 +#define MANUFACTURER Yiancar-Designs +#define PRODUCT NK65 +#define DESCRIPTION A 65-percent, tool-free RGB keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 } +#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, C13, C14, C15, A0, A1, A2, A3, A5 } +// To enable debugger set A13 A14 -> A5 A7 + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* Backlight options */ + +#define RGB_BACKLIGHT_ENABLED 1 + +#define RGB_BACKLIGHT_NK65 + +// they aren't really used if RGB_BACKLIGHT_HS60 defined +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 + +// disable backlight when USB suspended (PC sleep/hibernate/shutdown) +#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 + +// disable backlight after timeout in minutes, 0 = no timeout +#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 + +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + +// the default effect (RGB test) +#define RGB_BACKLIGHT_EFFECT 255 + +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + +#define DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL 128 + +// These define which keys in the matrix are alphas/mods +// Used for backlight effects so colors are different for +// alphas vs. mods +// Each value is for a row, bit 0 is column 0 +// Alpha=0 Mod=1 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0100000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0110000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111111000000111 + +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + +// TODO: refactor with new user EEPROM code (coming soon) +#define EEPROM_MAGIC 0x451F +#define EEPROM_MAGIC_ADDR 32 +// Bump this every time we change what we store +// This will automatically reset the EEPROM with defaults +// and avoid loading invalid data from the EEPROM +#define EEPROM_VERSION 0x08 +#define EEPROM_VERSION_ADDR 34 + +// Backlight config starts after EEPROM version +#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35 +// Dynamic keymap starts after backlight config (35+32) +#define DYNAMIC_KEYMAP_EEPROM_ADDR 67 +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 +// Dynamic macro starts after dynamic keymaps (67+(4*5*15*2)) = (67+600) +#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 667 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398 +#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/nk65/halconf.h b/keyboards/nk65/halconf.h new file mode 100755 index 0000000000..c3e0cbb728 --- /dev/null +++ b/keyboards/nk65/halconf.h @@ -0,0 +1,388 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/nk65/info.json b/keyboards/nk65/info.json new file mode 100755 index 0000000000..ea227f71d9 --- /dev/null +++ b/keyboards/nk65/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "NK65", + "url": "", + "maintainer": "yiancar", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Page Up", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Page Down", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] + } + } +} \ No newline at end of file diff --git a/keyboards/nk65/keymaps/default/keymap.c b/keyboards/nk65/keymaps/default/keymap.c new file mode 100755 index 0000000000..a793a8bf41 --- /dev/null +++ b/keyboards/nk65/keymaps/default/keymap.c @@ -0,0 +1,58 @@ +/* Copyright 2019 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_65_ansi( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,\ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_65_ansi( /* FN */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[2] = LAYOUT_65_ansi( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[3] = LAYOUT_65_ansi( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} \ No newline at end of file diff --git a/keyboards/nk65/keymaps/default/readme.md b/keyboards/nk65/keymaps/default/readme.md new file mode 100755 index 0000000000..27bcd0501d --- /dev/null +++ b/keyboards/nk65/keymaps/default/readme.md @@ -0,0 +1,6 @@ +The default keymap for NK65. VIA support disabled. +========================================================= + +![Layout image](https://i.imgur.com/DL0CjJO.png) + +Default layer is normal ANSI 65% \ No newline at end of file diff --git a/keyboards/nk65/keymaps/default_via/keymap.c b/keyboards/nk65/keymaps/default_via/keymap.c new file mode 100755 index 0000000000..a793a8bf41 --- /dev/null +++ b/keyboards/nk65/keymaps/default_via/keymap.c @@ -0,0 +1,58 @@ +/* Copyright 2019 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_65_ansi( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,\ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_65_ansi( /* FN */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[2] = LAYOUT_65_ansi( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[3] = LAYOUT_65_ansi( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} \ No newline at end of file diff --git a/keyboards/nk65/keymaps/default_via/readme.md b/keyboards/nk65/keymaps/default_via/readme.md new file mode 100755 index 0000000000..6689191e4c --- /dev/null +++ b/keyboards/nk65/keymaps/default_via/readme.md @@ -0,0 +1,6 @@ +The default keymap for NK65. VIA support enabled. +========================================================= + +![Layout image](https://i.imgur.com/DL0CjJO.png) + +Default layer is normal ANSI 65% \ No newline at end of file diff --git a/keyboards/nk65/keymaps/default_via/rules.mk b/keyboards/nk65/keymaps/default_via/rules.mk new file mode 100755 index 0000000000..deb4fc889b --- /dev/null +++ b/keyboards/nk65/keymaps/default_via/rules.mk @@ -0,0 +1,67 @@ +# project specific files +SRC = keyboards/zeal60/zeal60.c \ + keyboards/zeal60/rgb_backlight.c \ + drivers/issi/is31fl3733.c \ + quantum/color.c \ + drivers/arm/i2c_master.c + +## chip/board settings +# the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F3xx + +# Linker script to use +# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = STM32F303xC + +# Startup code to use +# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f3xx + +# Board: it should exist either in /os/hal/boards/ +# or /boards +BOARD = GENERIC_STM32_F303XC + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 +OPT_DEFS = + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Options to pass to dfu-util when flashing +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +DFU_SUFFIX_ARGS = -p DF11 -v 0483 + +# Build Options +# comment out to disable the options. +# +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no # Audio output on port C6 +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in +#SERIAL_LINK_ENABLE = yes + +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes +CIE1931_CURVE = yes diff --git a/keyboards/nk65/mcuconf.h b/keyboards/nk65/mcuconf.h new file mode 100755 index 0000000000..ce608f904e --- /dev/null +++ b/keyboards/nk65/mcuconf.h @@ -0,0 +1,257 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +#undef STM32_HSE_BYPASS +// #error "oh no" +// #endif + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/nk65/nk65.c b/keyboards/nk65/nk65.c new file mode 100755 index 0000000000..4952462183 --- /dev/null +++ b/keyboards/nk65/nk65.c @@ -0,0 +1,18 @@ +/* Copyright 2019 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #ifndef RGB_BACKLIGHT_NK65 + #error RGB_BACKLIGHT_NK65 not defined, recheck config.h + #endif diff --git a/keyboards/nk65/nk65.h b/keyboards/nk65/nk65.h new file mode 100755 index 0000000000..e45360541c --- /dev/null +++ b/keyboards/nk65/nk65.h @@ -0,0 +1,38 @@ +/* Copyright 2019 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define XXX KC_NO + +#include "quantum.h" +#include "../zeal60/rgb_backlight_keycodes.h" +#include "../zeal60/zeal60_keycodes.h" + +// This a shortcut to help you visually see your layout. + +#define LAYOUT_65_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, K49, K4A, K4B, K4C, K4D, K4E } \ +} diff --git a/keyboards/nk65/readme.md b/keyboards/nk65/readme.md new file mode 100755 index 0000000000..c893c9782a --- /dev/null +++ b/keyboards/nk65/readme.md @@ -0,0 +1,37 @@ +NK65 +========= + +[NK65]() + +This is a standard fixed layout 65% PCB. It supports VIA and full per-key RGB. + +Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar) +Hardware Supported: A 65% keyboard with STM32F303CC +Hardware Availability: https://novelkeys.xyz/ + +Due to the RGB implementation, the NK65 is currently not compatible with community layouts. + +## Instructions + +### Build + +Make example for this keyboard (after setting up your build environment): + + make nk65:default_via + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +### Reset + +- Unplug +- Hold Escape +- Plug In +- Unplug +- Release Escape + +### Flash + +- Unplug +- Hold Escape +- Plug In +- Flash using QMK Toolbox or dfu-util (`make nk65::dfu-util`) diff --git a/keyboards/nk65/rules.mk b/keyboards/nk65/rules.mk new file mode 100755 index 0000000000..9467227805 --- /dev/null +++ b/keyboards/nk65/rules.mk @@ -0,0 +1,69 @@ +# project specific files +SRC = keyboards/zeal60/zeal60.c \ + keyboards/zeal60/rgb_backlight.c \ + drivers/issi/is31fl3733.c \ + quantum/color.c \ + drivers/arm/i2c_master.c + +## chip/board settings +# the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F3xx + +# Linker script to use +# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = STM32F303xC + +# Startup code to use +# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f3xx + +# Board: it should exist either in /os/hal/boards/ +# or /boards +BOARD = GENERIC_STM32_F303XC + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 +OPT_DEFS = + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Options to pass to dfu-util when flashing +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +DFU_SUFFIX_ARGS = -p DF11 -v 0483 + +# Build Options +# comment out to disable the options. +# +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no # Audio output on port C6 +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in +#SERIAL_LINK_ENABLE = yes + +RAW_ENABLE = no +DYNAMIC_KEYMAP_ENABLE = no +CIE1931_CURVE = yes + +LAYOUTS = 65_ansi diff --git a/keyboards/zeal60/rgb_backlight.c b/keyboards/zeal60/rgb_backlight.c index d5f206fdce..a3f7151bf5 100644 --- a/keyboards/zeal60/rgb_backlight.c +++ b/keyboards/zeal60/rgb_backlight.c @@ -15,9 +15,9 @@ */ #if RGB_BACKLIGHT_ENABLED -#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60) +#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) || defined(RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) #else -#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU +#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU, RGB_BACKLIGHT_HS60, RGB_BACKLIGHT_NK65 #endif #ifndef MAX @@ -33,7 +33,7 @@ #include "rgb_backlight_api.h" #include "rgb_backlight_keycodes.h" -#if !defined(RGB_BACKLIGHT_HS60) +#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) #include #include #include @@ -47,12 +47,15 @@ #include "progmem.h" #include "quantum/color.h" -#if defined (RGB_BACKLIGHT_M6_B) +#if defined(RGB_BACKLIGHT_M6_B) #include "drivers/issi/is31fl3218.h" #define BACKLIGHT_LED_COUNT 6 -#elif defined (RGB_BACKLIGHT_HS60) +#elif defined(RGB_BACKLIGHT_HS60) #include "drivers/issi/is31fl3733.h" #define BACKLIGHT_LED_COUNT 64 +#elif defined(RGB_BACKLIGHT_NK65) +#include "drivers/issi/is31fl3733.h" +#define BACKLIGHT_LED_COUNT 69 #else #include "drivers/issi/is31fl3731.h" #define BACKLIGHT_LED_COUNT 72 @@ -61,31 +64,31 @@ #define BACKLIGHT_EFFECT_MAX 10 backlight_config g_config = { - .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE, - .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT, - .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT, - .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR, - .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER, - .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS, - .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED, - .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT, - .brightness = RGB_BACKLIGHT_BRIGHTNESS, - .effect = RGB_BACKLIGHT_EFFECT, - .effect_speed = RGB_BACKLIGHT_EFFECT_SPEED, - .color_1 = RGB_BACKLIGHT_COLOR_1, - .color_2 = RGB_BACKLIGHT_COLOR_2, - .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR, - .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR, - .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR, - .layer_3_indicator = RGB_BACKLIGHT_LAYER_3_INDICATOR, - .alphas_mods = { - RGB_BACKLIGHT_ALPHAS_MODS_ROW_0, - RGB_BACKLIGHT_ALPHAS_MODS_ROW_1, - RGB_BACKLIGHT_ALPHAS_MODS_ROW_2, - RGB_BACKLIGHT_ALPHAS_MODS_ROW_3, - RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 }, + .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE, + .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT, + .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT, + .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR, + .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER, + .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS, + .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED, + .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT, + .brightness = RGB_BACKLIGHT_BRIGHTNESS, + .effect = RGB_BACKLIGHT_EFFECT, + .effect_speed = RGB_BACKLIGHT_EFFECT_SPEED, + .color_1 = RGB_BACKLIGHT_COLOR_1, + .color_2 = RGB_BACKLIGHT_COLOR_2, + .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR, + .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR, + .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR, + .layer_3_indicator = RGB_BACKLIGHT_LAYER_3_INDICATOR, + .alphas_mods = { + RGB_BACKLIGHT_ALPHAS_MODS_ROW_0, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_1, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_2, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_3, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 }, #if defined(RGB_BACKLIGHT_M6_B) - .custom_color = { { 0, 255 }, { 43, 255 }, { 85, 255 }, { 128, 255 }, { 171, 255 }, { 213, 255 } } + .custom_color = { { 0, 255 }, { 43, 255 }, { 85, 255 }, { 128, 255 }, { 171, 255 }, { 213, 255 } } #endif }; @@ -107,7 +110,6 @@ uint32_t g_any_key_hit = 0; // set to 0 for write, 1 for read (as per I2C protocol) // ADDR_2 is not needed. it is here as a dummy #define ISSI_ADDR_1 0x50 -#define ISSI_ADDR_2 0x50 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations @@ -182,6 +184,152 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_16, J_16, L_16}, //LA64 }; +#elif defined(RGB_BACKLIGHT_NK65) + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// ADDR_2 is not needed. it is here as a dummy +#define ISSI_ADDR_1 0x50 +#define ISSI_ADDR_2 0x52 + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, B_1, A_1, C_1}, //LA1 + {0, E_1, D_1, F_1}, //LA2 + {0, H_1, G_1, I_1}, //LA3 + {0, K_1, J_1, L_1}, //LA4 + {0, B_2, A_2, C_2}, //LA5 + {0, E_2, D_2, F_2}, //LA6 + {0, H_2, G_2, I_2}, //LA7 + {0, K_2, J_2, L_2}, //LA8 + {0, B_3, A_3, C_3}, //LA9 + {0, E_3, D_3, F_3}, //LA10 + {0, H_3, G_3, I_3}, //LA11 + {0, K_3, J_3, L_3}, //LA12 + {0, B_4, A_4, C_4}, //LA13 + {0, E_4, D_4, F_4}, //LA14 + {0, H_4, G_4, I_4}, //LA15 + {0, K_4, J_4, L_4}, //LA16 + {0, B_5, A_5, C_5}, //LA17 + {0, E_5, D_5, F_5}, //LA18 + {0, H_5, G_5, I_5}, //LA19 + {0, K_5, J_5, L_5}, //LA20 + {0, B_6, A_6, C_6}, //LA21 + {0, E_6, D_6, F_6}, //LA22 + {0, H_6, G_6, I_6}, //LA23 + {0, K_6, J_6, L_6}, //LA24 + {0, B_7, A_7, C_7}, //LA25 + {0, E_7, D_7, F_7}, //LA26 + {0, H_7, G_7, I_7}, //LA27 + {0, K_7, J_7, L_7}, //LA28 + {0, B_8, A_8, C_8}, //LA29 + {0, E_8, D_8, F_8}, //LA30 + {0, H_8, G_8, I_8}, //LA31 + {0, K_8, J_8, L_8}, //LA32 + {0, B_9, A_9, C_9}, //LA33 + {0, E_9, D_9, F_9}, //LA34 + {0, H_9, G_9, I_9}, //LA35 + {0, K_9, J_9, L_9}, //LA36 + {0, B_10, A_10, C_10}, //LA37 + {0, E_10, D_10, F_10}, //LA38 + {0, H_10, G_10, I_10}, //LA39 + {0, K_10, J_10, L_10}, //LA40 + {0, B_11, A_11, C_11}, //LA41 + {0, E_11, D_11, F_11}, //LA42 + {0, H_11, G_11, I_11}, //LA43 + {0, K_11, J_11, L_11}, //LA44 + {0, B_12, A_12, C_12}, //LA45 + {0, E_12, D_12, F_12}, //LA46 + {0, H_12, G_12, I_12}, //LA47 + {0, K_12, J_12, L_12}, //LA48 + {0, B_13, A_13, C_13}, //LA49 + {0, E_13, D_13, F_13}, //LA50 + {0, H_13, G_13, I_13}, //LA51 + {0, K_13, J_13, L_13}, //LA52 + {0, B_14, A_14, C_14}, //LA53 + {0, E_14, D_14, F_14}, //LA54 + {0, H_14, G_14, I_14}, //LA55 + {0, K_14, J_14, L_14}, //LA56 + {0, B_15, A_15, C_15}, //LA57 + {0, E_15, D_15, F_15}, //LA58 + {0, H_15, G_15, I_15}, //LA59 + {0, K_15, J_15, L_15}, //LA60 + {0, B_16, A_16, C_16}, //LA61 + {0, E_16, D_16, F_16}, //LA62 + {0, H_16, G_16, I_16}, //LA63 + {0, K_16, J_16, L_16}, //LA64 + + {1, B_1, A_1, C_1}, //LB1 + {1, E_1, D_1, F_1}, //LB2 + {1, H_1, G_1, I_1}, //LB3 + {1, K_1, J_1, L_1}, //LB4 + {1, B_2, A_2, C_2}, //LB5 + {1, E_2, D_2, F_2}, //LB6 + {1, H_2, G_2, I_2}, //LB7 + {1, K_2, J_2, L_2}, //LB8 + {1, B_3, A_3, C_3}, //LB9 + {1, E_3, D_3, F_3}, //LB10 + {1, H_3, G_3, I_3}, //LB11 + {1, K_3, J_3, L_3}, //LB12 + {1, B_4, A_4, C_4}, //LB13 + {1, E_4, D_4, F_4}, //LB14 + {1, H_4, G_4, I_4}, //LB15 + {1, K_4, J_4, L_4}, //LB16 + {1, B_5, A_5, C_5}, //LB17 + {1, E_5, D_5, F_5}, //LB18 + {1, H_5, G_5, I_5}, //LB19 + {1, K_5, J_5, L_5}, //LB20 + {1, B_6, A_6, C_6}, //LB21 + {1, E_6, D_6, F_6}, //LB22 + {1, H_6, G_6, I_6}, //LB23 + {1, K_6, J_6, L_6}, //LB24 + {1, B_7, A_7, C_7}, //LB25 + {1, E_7, D_7, F_7}, //LB26 + {1, H_7, G_7, I_7}, //LB27 + {1, K_7, J_7, L_7}, //LB28 + {1, B_8, A_8, C_8}, //LB29 + {1, E_8, D_8, F_8}, //LB30 + {1, H_8, G_8, I_8}, //LB31 + {1, K_8, J_8, L_8}, //LB32 + {1, B_9, A_9, C_9}, //LB33 + {1, E_9, D_9, F_9}, //LB34 + {1, H_9, G_9, I_9}, //LB35 + {1, K_9, J_9, L_9}, //LB36 + {1, B_10, A_10, C_10}, //LB37 + {1, E_10, D_10, F_10}, //LB38 + {1, H_10, G_10, I_10}, //LB39 + {1, K_10, J_10, L_10}, //LB40 + {1, B_11, A_11, C_11}, //LB41 + {1, E_11, D_11, F_11}, //LB42 + {1, H_11, G_11, I_11}, //LB43 + {1, K_11, J_11, L_11}, //LB44 + {1, B_12, A_12, C_12}, //LB45 + {1, E_12, D_12, F_12}, //LB46 + {1, H_12, G_12, I_12}, //LB47 + {1, K_12, J_12, L_12}, //LB48 + {1, B_13, A_13, C_13}, //LB49 + {1, E_13, D_13, F_13}, //LB50 + {1, H_13, G_13, I_13}, //LB51 + {1, K_13, J_13, L_13}, //LB52 + {1, B_14, A_14, C_14}, //LB53 + {1, E_14, D_14, F_14}, //LB54 + {1, H_14, G_14, I_14}, //LB55 + {1, K_14, J_14, L_14}, //LB56 + {1, B_15, A_15, C_15}, //LB57 + {1, E_15, D_15, F_15}, //LB58 + {1, H_15, G_15, I_15}, //LB59 + {1, K_15, J_15, L_15}, //LB60 + {1, B_16, A_16, C_16}, //LB61 + {1, E_16, D_16, F_16}, //LB62 + {1, H_16, G_16, I_16}, //LB63 + {1, K_16, J_16, L_16}, //LB64 +}; + #elif !defined(RGB_BACKLIGHT_M6_B) // This is a 7-bit address, that gets left-shifted and bit 0 // set to 0 for write, 1 for read (as per I2C protocol) @@ -195,269 +343,292 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { * | | G location * | | | B location * | | | | */ - {0, C2_1, C3_1, C4_1}, // LA0 - {0, C1_1, C3_2, C4_2}, // LA1 - {0, C1_2, C2_2, C4_3}, // LA2 - {0, C1_3, C2_3, C3_3}, // LA3 - {0, C1_4, C2_4, C3_4}, // LA4 - {0, C1_5, C2_5, C3_5}, // LA5 - {0, C1_6, C2_6, C3_6}, // LA6 - {0, C1_7, C2_7, C3_7}, // LA7 - {0, C1_8, C2_8, C3_8}, // LA8 - {0, C9_1, C8_1, C7_1}, // LA9 - {0, C9_2, C8_2, C7_2}, // LA10 - {0, C9_3, C8_3, C7_3}, // LA11 - {0, C9_4, C8_4, C7_4}, // LA12 - {0, C9_5, C8_5, C7_5}, // LA13 - {0, C9_6, C8_6, C7_6}, // LA14 - {0, C9_7, C8_7, C6_6}, // LA15 - {0, C9_8, C7_7, C6_7}, // LA16 - {0, C8_8, C7_8, C6_8}, // LA17 - - {0, C2_9, C3_9, C4_9}, // LB0 - {0, C1_9, C3_10, C4_10}, // LB1 - {0, C1_10, C2_10, C4_11}, // LB2 - {0, C1_11, C2_11, C3_11}, // LB3 - {0, C1_12, C2_12, C3_12}, // LB4 - {0, C1_13, C2_13, C3_13}, // LB5 - {0, C1_14, C2_14, C3_14}, // LB6 - {0, C1_15, C2_15, C3_15}, // LB7 - {0, C1_16, C2_16, C3_16}, // LB8 - {0, C9_9, C8_9, C7_9}, // LB9 - {0, C9_10, C8_10, C7_10}, // LB10 - {0, C9_11, C8_11, C7_11}, // LB11 - {0, C9_12, C8_12, C7_12}, // LB12 - {0, C9_13, C8_13, C7_13}, // LB13 - {0, C9_14, C8_14, C7_14}, // LB14 - {0, C9_15, C8_15, C6_14}, // LB15 - {0, C9_16, C7_15, C6_15}, // LB16 - {0, C8_16, C7_16, C6_16}, // LB17 - - {1, C2_1, C3_1, C4_1}, // LC0 - {1, C1_1, C3_2, C4_2}, // LC1 - {1, C1_2, C2_2, C4_3}, // LC2 - {1, C1_3, C2_3, C3_3}, // LC3 - {1, C1_4, C2_4, C3_4}, // LC4 - {1, C1_5, C2_5, C3_5}, // LC5 - {1, C1_6, C2_6, C3_6}, // LC6 - {1, C1_7, C2_7, C3_7}, // LC7 - {1, C1_8, C2_8, C3_8}, // LC8 - {1, C9_1, C8_1, C7_1}, // LC9 - {1, C9_2, C8_2, C7_2}, // LC10 - {1, C9_3, C8_3, C7_3}, // LC11 - {1, C9_4, C8_4, C7_4}, // LC12 - {1, C9_5, C8_5, C7_5}, // LC13 - {1, C9_6, C8_6, C7_6}, // LC14 - {1, C9_7, C8_7, C6_6}, // LC15 - {1, C9_8, C7_7, C6_7}, // LC16 - {1, C8_8, C7_8, C6_8}, // LC17 - - {1, C2_9, C3_9, C4_9}, // LD0 - {1, C1_9, C3_10, C4_10}, // LD1 - {1, C1_10, C2_10, C4_11}, // LD2 - {1, C1_11, C2_11, C3_11}, // LD3 - {1, C1_12, C2_12, C3_12}, // LD4 - {1, C1_13, C2_13, C3_13}, // LD5 - {1, C1_14, C2_14, C3_14}, // LD6 - {1, C1_15, C2_15, C3_15}, // LD7 - {1, C1_16, C2_16, C3_16}, // LD8 - {1, C9_9, C8_9, C7_9}, // LD9 - {1, C9_10, C8_10, C7_10}, // LD10 - {1, C9_11, C8_11, C7_11}, // LD11 - {1, C9_12, C8_12, C7_12}, // LD12 - {1, C9_13, C8_13, C7_13}, // LD13 - {1, C9_14, C8_14, C7_14}, // LD14 - {1, C9_15, C8_15, C6_14}, // LD15 - {1, C9_16, C7_15, C6_15}, // LD16 - {1, C8_16, C7_16, C6_16}, // LD17 + {0, C2_1, C3_1, C4_1}, // LA0 + {0, C1_1, C3_2, C4_2}, // LA1 + {0, C1_2, C2_2, C4_3}, // LA2 + {0, C1_3, C2_3, C3_3}, // LA3 + {0, C1_4, C2_4, C3_4}, // LA4 + {0, C1_5, C2_5, C3_5}, // LA5 + {0, C1_6, C2_6, C3_6}, // LA6 + {0, C1_7, C2_7, C3_7}, // LA7 + {0, C1_8, C2_8, C3_8}, // LA8 + {0, C9_1, C8_1, C7_1}, // LA9 + {0, C9_2, C8_2, C7_2}, // LA10 + {0, C9_3, C8_3, C7_3}, // LA11 + {0, C9_4, C8_4, C7_4}, // LA12 + {0, C9_5, C8_5, C7_5}, // LA13 + {0, C9_6, C8_6, C7_6}, // LA14 + {0, C9_7, C8_7, C6_6}, // LA15 + {0, C9_8, C7_7, C6_7}, // LA16 + {0, C8_8, C7_8, C6_8}, // LA17 + + {0, C2_9, C3_9, C4_9}, // LB0 + {0, C1_9, C3_10, C4_10}, // LB1 + {0, C1_10, C2_10, C4_11}, // LB2 + {0, C1_11, C2_11, C3_11}, // LB3 + {0, C1_12, C2_12, C3_12}, // LB4 + {0, C1_13, C2_13, C3_13}, // LB5 + {0, C1_14, C2_14, C3_14}, // LB6 + {0, C1_15, C2_15, C3_15}, // LB7 + {0, C1_16, C2_16, C3_16}, // LB8 + {0, C9_9, C8_9, C7_9}, // LB9 + {0, C9_10, C8_10, C7_10}, // LB10 + {0, C9_11, C8_11, C7_11}, // LB11 + {0, C9_12, C8_12, C7_12}, // LB12 + {0, C9_13, C8_13, C7_13}, // LB13 + {0, C9_14, C8_14, C7_14}, // LB14 + {0, C9_15, C8_15, C6_14}, // LB15 + {0, C9_16, C7_15, C6_15}, // LB16 + {0, C8_16, C7_16, C6_16}, // LB17 + + {1, C2_1, C3_1, C4_1}, // LC0 + {1, C1_1, C3_2, C4_2}, // LC1 + {1, C1_2, C2_2, C4_3}, // LC2 + {1, C1_3, C2_3, C3_3}, // LC3 + {1, C1_4, C2_4, C3_4}, // LC4 + {1, C1_5, C2_5, C3_5}, // LC5 + {1, C1_6, C2_6, C3_6}, // LC6 + {1, C1_7, C2_7, C3_7}, // LC7 + {1, C1_8, C2_8, C3_8}, // LC8 + {1, C9_1, C8_1, C7_1}, // LC9 + {1, C9_2, C8_2, C7_2}, // LC10 + {1, C9_3, C8_3, C7_3}, // LC11 + {1, C9_4, C8_4, C7_4}, // LC12 + {1, C9_5, C8_5, C7_5}, // LC13 + {1, C9_6, C8_6, C7_6}, // LC14 + {1, C9_7, C8_7, C6_6}, // LC15 + {1, C9_8, C7_7, C6_7}, // LC16 + {1, C8_8, C7_8, C6_8}, // LC17 + + {1, C2_9, C3_9, C4_9}, // LD0 + {1, C1_9, C3_10, C4_10}, // LD1 + {1, C1_10, C2_10, C4_11}, // LD2 + {1, C1_11, C2_11, C3_11}, // LD3 + {1, C1_12, C2_12, C3_12}, // LD4 + {1, C1_13, C2_13, C3_13}, // LD5 + {1, C1_14, C2_14, C3_14}, // LD6 + {1, C1_15, C2_15, C3_15}, // LD7 + {1, C1_16, C2_16, C3_16}, // LD8 + {1, C9_9, C8_9, C7_9}, // LD9 + {1, C9_10, C8_10, C7_10}, // LD10 + {1, C9_11, C8_11, C7_11}, // LD11 + {1, C9_12, C8_12, C7_12}, // LD12 + {1, C9_13, C8_13, C7_13}, // LD13 + {1, C9_14, C8_14, C7_14}, // LD14 + {1, C9_15, C8_15, C6_14}, // LD15 + {1, C9_16, C7_15, C6_15}, // LD16 + {1, C8_16, C7_16, C6_16}, // LD17 }; #endif // !defined(RGB_BACKLIGHT_M6_B) typedef struct Point { - uint8_t x; - uint8_t y; + uint8_t x; + uint8_t y; } Point; // index in range 0..71 (LA0..LA17, LB0..LB17, LC0..LC17, LD0..LD17) // point values in range x=0..224 y=0..64 // origin is center of top-left key (i.e Esc) -#if defined (RGB_BACKLIGHT_ZEAL65) +#if defined(RGB_BACKLIGHT_ZEAL65) const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, - {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, - // LB0..LB17 - {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32}, - {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, - // LC0..LC17 - {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64}, - {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64}, - // LD0..LD17 - {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, - {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64} + // LA0..LA17 + {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, + {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, + // LB0..LB17 + {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32}, + {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, + // LC0..LC17 + {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64}, + {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64}, + // LD0..LD17 + {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, + {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64} }; const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243}, - {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, - // LB0..LB17 - {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255}, - {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, - // LC0..LC17 - {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255}, - {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255}, - // LD0..LD17 - {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255}, - {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {201,228}, {206,255}, {213,255}, {218,255} + // LA0..LA17 + {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243}, + {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, + // LB0..LB17 + {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255}, + {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, + // LC0..LC17 + {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255}, + {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255}, + // LD0..LD17 + {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255}, + {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {201,228}, {206,255}, {213,255}, {218,255} }; -#elif defined (RGB_BACKLIGHT_KOYU) +#elif defined(RGB_BACKLIGHT_KOYU) const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, - {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, - // LB0..LB17 - {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {240,0}, {240,16}, {240,32}, - {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, - // LC0..LC17 - {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,60}, {24,64}, - {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64}, - // LD0..LD17 - {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, - {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {208,64}, {255,255} + // LA0..LA17 + {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, + {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, + // LB0..LB17 + {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {240,0}, {240,16}, {240,32}, + {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, + // LC0..LC17 + {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,60}, {24,64}, + {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64}, + // LD0..LD17 + {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, + {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {208,64}, {255,255} }; const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243}, - {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, - // LB0..LB17 - {56,255}, {51,255}, {46,255}, {42,255}, {38,255}, {35,255}, {32,255}, {19,255}, {0,255}, - {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, - // LC0..LC17 - {189,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {172,252}, {169,255}, {165,255}, - {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {255,255}, {148,255}, {161,255}, - // LD0..LD17 - {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255}, - {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {207,238}, {211,255}, {218,255}, {255,255} + // LA0..LA17 + {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243}, + {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, + // LB0..LB17 + {56,255}, {51,255}, {46,255}, {42,255}, {38,255}, {35,255}, {32,255}, {19,255}, {0,255}, + {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, + // LC0..LC17 + {189,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {172,252}, {169,255}, {165,255}, + {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {255,255}, {148,255}, {161,255}, + // LD0..LD17 + {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255}, + {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {207,238}, {211,255}, {218,255}, {255,255} }; -#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) +#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A) const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, - {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, - // LB0..LB17 - {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255}, - {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255}, - // LC0..LC17 - {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64}, - {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64}, - // LD0..LD17 - {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48}, - {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64} + // LA0..LA17 + {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, + {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, + // LB0..LB17 + {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255}, + {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255}, + // LC0..LC17 + {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64}, + {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64}, + // LD0..LD17 + {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48}, + {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64} }; const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255}, - {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255}, - // LB0..LB17 - {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255}, - {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255}, - // LC0..LC17 - {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255}, - {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255}, - // LD0..LD17 - {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255}, - {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255} + // LA0..LA17 + {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255}, + {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255}, + // LB0..LB17 + {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255}, + {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255}, + // LC0..LC17 + {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255}, + {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255}, + // LD0..LD17 + {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255}, + {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255} }; -#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI) +#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_ANSI) const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA47 - {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, - {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, - {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, - {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, - {255,255},// LA48 does not exist, dummy - // LA49..LA50 - {192,0}, {200,16}, - {255,255},// LA51 does not exit, dummy - // LA52..LA60 - {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64}, - {255,255},// LA61 does not exit, dummy - {162,64}, {182,64}, {202,64} + // LA1..LA47 + {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, + {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, + {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, + {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, + {255,255},// LA48 does not exist, dummy + // LA49..LA50 + {192,0}, {200,16}, + {255,255},// LA51 does not exit, dummy + // LA52..LA60 + {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64}, + {255,255},// LA61 does not exit, dummy + {162,64}, {182,64}, {202,64} }; const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA47 - {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, - {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, - {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, - {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, - {255,255},// LA48 does not exist, dummy - // LA49..LA50 - {39,255}, {23,238}, - {255,255},// LA51 does not exit, dummy - // LA52..LA60 - {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, - {255,255},// LA61 does not exit, dummy - {209,255}, {215,255}, {220,255} + // LA1..LA47 + {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, + {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, + {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, + {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, + {255,255},// LA48 does not exist, dummy + // LA49..LA50 + {39,255}, {23,238}, + {255,255},// LA51 does not exit, dummy + // LA52..LA60 + {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, + {255,255},// LA61 does not exit, dummy + {209,255}, {215,255}, {220,255} }; -#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB) +#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_HHKB) const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA60 - {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, - {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, - {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, - {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, - {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64}, - {255,255}, {255,255}, // LA61..LA62 does not exit, dummy - // LA63..LA64 - {180,64}, {200,64} + // LA1..LA60 + {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, + {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, + {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, + {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, + {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64}, + {255,255}, {255,255}, // LA61..LA62 does not exit, dummy + // LA63..LA64 + {180,64}, {200,64} }; const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA60 - {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, - {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, - {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, - {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255}, - {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255}, - {255,255}, {255,255}, // LA61..LA62 does not exit, dummy - // LA63..LA64 - {214,255}, {219,255} + // LA1..LA60 + {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, + {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, + {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, + {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255}, + {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255}, + {255,255}, {255,255}, // LA61..LA62 does not exit, dummy + // LA63..LA64 + {214,255}, {219,255} }; -#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO +#elif defined(RGB_BACKLIGHT_HS60) //HS60_ISO const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA50 - {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0}, - {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16}, - {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16}, - {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16}, - {255,255},// LA51 does not exit, dummy - // LA52..LA60 - {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64}, - {255,255},// LA61 does not exit, dummy - {162,64}, {182,64}, {202,64} + // LA1..LA50 + {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0}, + {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16}, + {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16}, + {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16}, + {255,255},// LA51 does not exit, dummy + // LA52..LA60 + {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64}, + {255,255},// LA61 does not exit, dummy + {162,64}, {182,64}, {202,64} }; const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA50 - {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255}, - {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129}, - {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101}, - {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238}, - {255,255},// LA51 does not exit, dummy - // LA52..LA60 - {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, - {255,255},// LA61 does not exit, dummy - {209,255}, {215,255}, {220,255} + // LA1..LA50 + {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255}, + {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129}, + {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101}, + {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238}, + {255,255},// LA51 does not exit, dummy + // LA52..LA60 + {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, + {255,255},// LA61 does not exit, dummy + {209,255}, {215,255}, {220,255} }; -#elif defined (RGB_BACKLIGHT_M6_B) +#elif defined(RGB_BACKLIGHT_NK65) +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA1..LA60 + {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, + {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, + {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, + {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, + {160,64}, {192,0}, {200,16}, {210,48}, {224,48}, {216,0}, {220,16}, {214,32}, {224,64}, {2,64}, {22,64}, {42,64}, {102,64}, + {255,255},// LA61 does not exit, dummy + //LA62..LB5 + {176,64}, {192,64}, {208,64}, {240,0}, {240,16}, {240,48}, {240,64}, {240,32} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA1..LA60 + {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, + {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, + {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, + {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, + {208,255}, {39,255}, {23,238}, {235,255}, {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, + {255,255},// LA61 does not exit, dummy + //LA62..LB5 + {221,255}, {225,255}, {229,255}, {22,255}, {12,255}, {244,255}, {234,255}, {255,255}, +}; +#elif defined(RGB_BACKLIGHT_M6_B) // M6-B is really simple: // 0 3 5 // 1 2 4 const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0} + {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0} }; const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - {160,255}, {96,255}, {77,255}, {179,255}, {51,255}, {205,255} + {160,255}, {96,255}, {77,255}, {179,255}, {51,255}, {205,255} }; #endif @@ -467,58 +638,58 @@ const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { // or having a large "bitmap" and sampling them. void map_led_to_point( uint8_t index, Point *point ) { - // Slightly messy way to get Point structs out of progmem. - uint8_t *addr = (uint8_t*)&g_map_led_to_point[index]; - point->x = pgm_read_byte(addr); - point->y = pgm_read_byte(addr+1); + // Slightly messy way to get Point structs out of progmem. + uint8_t *addr = (uint8_t*)&g_map_led_to_point[index]; + point->x = pgm_read_byte(addr); + point->y = pgm_read_byte(addr+1); -#if defined (RGB_BACKLIGHT_M6_B) - return; +#if defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) + return; #endif - switch (index) - { - case 18+4: // LB4A - if ( g_config.use_split_backspace ) - point->x -= 8; - break; -#if defined (RGB_BACKLIGHT_ZEAL60) - case 18+14: // LB14A - if ( g_config.use_iso_enter ) - point->y += 8; // extremely pedantic - break; - case 54+5: // LD5A - if ( !g_config.use_iso_enter ) - point->x -= 10; - break; - case 36+16: // LC16A - if ( !g_config.use_split_left_shift ) - point->x += 8; - break; + switch (index) + { + case 18+4: // LB4A + if ( g_config.use_split_backspace ) + point->x -= 8; + break; +#if defined(RGB_BACKLIGHT_ZEAL60) + case 18+14: // LB14A + if ( g_config.use_iso_enter ) + point->y += 8; // extremely pedantic + break; + case 54+5: // LD5A + if ( !g_config.use_iso_enter ) + point->x -= 10; + break; + case 36+16: // LC16A + if ( !g_config.use_split_left_shift ) + point->x += 8; + break; #endif -#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) - case 36+0: // LC0A - if ( g_config.use_7u_spacebar ) - point->x += 10; - break; - case 36+6: // LC6A - if ( g_config.use_7u_spacebar ) - point->x += 4; - break; - case 54+7: // LD7A - if ( !g_config.use_split_right_shift ) - point->x -= 8; - break; +#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A) + case 36+0: // LC0A + if ( g_config.use_7u_spacebar ) + point->x += 10; + break; + case 36+6: // LC6A + if ( g_config.use_7u_spacebar ) + point->x += 4; + break; + case 54+7: // LD7A + if ( !g_config.use_split_right_shift ) + point->x -= 8; + break; #endif - } + } } void map_led_to_point_polar( uint8_t index, Point *point ) { - // Slightly messy way to get Point structs out of progmem. - uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index]; - point->x = pgm_read_byte(addr); - point->y = pgm_read_byte(addr+1); + // Slightly messy way to get Point structs out of progmem. + uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index]; + point->x = pgm_read_byte(addr); + point->y = pgm_read_byte(addr+1); } // @@ -526,7 +697,7 @@ void map_led_to_point_polar( uint8_t index, Point *point ) // -#if defined (RGB_BACKLIGHT_ZEAL65) +#if defined(RGB_BACKLIGHT_ZEAL65) // Note: Left spacebar stab is at 4,2 (LC7) // Right spacebar stab is at 4,9 (D14) // @@ -536,11 +707,11 @@ void map_led_to_point_polar( uint8_t index, Point *point ) // C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15 // C17, C8, C7, ---, ---, ---, ---, C0, ---, D14, D15, D16, D17, B17, B16 const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, - { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, - { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, - { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, - { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 } + { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, + { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, + { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, + { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, + { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 } }; #elif defined(RGB_BACKLIGHT_KOYU) // Note: Left spacebar stab is at 4,4 (LC6) @@ -552,13 +723,13 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { // C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15 // C17, C8, C7, C6, ---, ---, ---, C0, ---, ---, D14, D15, D16, B17, B16 const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, - { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, - { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, - { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, - { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 18+17, 18+16 } + { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, + { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, + { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, + { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, + { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 18+17, 18+16 } }; -#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) +#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A) // Note: Left spacebar stab is at 4,3 (LC6) // Right spacebar stab is at 4,9 (LD13) or 4,10 (LD14) // @@ -568,13 +739,13 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { // C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, // C17, C8, C7, C6, ---, ---, ---, C0, ---, D13, D14, D15, D16, D17, const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 }, - { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 }, - { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 }, - { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 }, - { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 } + { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 }, + { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 }, + { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 }, + { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 }, + { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 } }; -#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI) +#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_ANSI) // // LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, // LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, @@ -582,13 +753,13 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { // LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52, // LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56 const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, - { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 }, - { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, - { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 }, - { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 } + { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, + { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 }, + { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, + { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 }, + { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 } }; -#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB) +#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_HHKB) // // LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, // LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, LA48, @@ -596,13 +767,13 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { // LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52, // LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, ---, LA63, LA64, LA56 const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, - { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 }, - { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, - { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 }, - { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 } + { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, + { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 }, + { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, + { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 }, + { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 } }; -#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO +#elif defined(RGB_BACKLIGHT_HS60) //HS60_ISO // // LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, // LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, @@ -610,75 +781,94 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { // LA4, LA48, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52, // LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56 const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, - { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 }, - { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, - { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 }, - { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 } + { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, + { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 }, + { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, + { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 }, + { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 } +}; +#elif defined(RGB_BACKLIGHT_NK65) +// +// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, LB1, +// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, LB2, +// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, LB5, +// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52, LB3, +// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, LA48, LA62, LA63, LA64, LA56, LB4 +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1, 1+64-1 }, + { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255, 2+64-1 }, + { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1, 5+64-1 }, + { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1, 3+64-1 }, + { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 48-1, 62-1, 63-1, 64-1, 56-1, 4+64-1 } }; -#elif defined (RGB_BACKLIGHT_M6_B) +#elif defined(RGB_BACKLIGHT_M6_B) // M6-B is really simple: // 0 3 5 // 1 2 4 const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 0, 3, 5, 1, 2, 4 } + { 0, 3, 5, 1, 2, 4 } }; #endif void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led ) { - *led = 255; - if ( row < MATRIX_ROWS && column < MATRIX_COLS ) - { - *led = pgm_read_byte(&g_map_row_column_to_led[row][column]); - } + *led = 255; + if ( row < MATRIX_ROWS && column < MATRIX_COLS ) + { + *led = pgm_read_byte(&g_map_row_column_to_led[row][column]); + } } void backlight_update_pwm_buffers(void) { -#if defined (RGB_BACKLIGHT_M6_B) - IS31FL3218_update_pwm_buffers(); -#elif defined (RGB_BACKLIGHT_HS60) - IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); +#if defined(RGB_BACKLIGHT_M6_B) + IS31FL3218_update_pwm_buffers(); +#elif defined(RGB_BACKLIGHT_HS60) + IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 ); + IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); +#elif defined(RGB_BACKLIGHT_NK65) + IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 ); + IS31FL3733_update_pwm_buffers( ISSI_ADDR_2, 1 ); + IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #else - IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 ); - IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); + IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 ); + IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); #endif } void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) { -#if defined (RGB_BACKLIGHT_M6_B) - IS31FL3218_set_color( index, red, green, blue ); -#elif defined (RGB_BACKLIGHT_HS60) - IS31FL3733_set_color( index, red, green, blue ); +#if defined(RGB_BACKLIGHT_M6_B) + IS31FL3218_set_color( index, red, green, blue ); +#elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) + IS31FL3733_set_color( index, red, green, blue ); #else - IS31FL3731_set_color( index, red, green, blue ); + IS31FL3731_set_color( index, red, green, blue ); #endif } void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) { -#if defined (RGB_BACKLIGHT_M6_B) - IS31FL3218_set_color_all( red, green, blue ); -#elif defined (RGB_BACKLIGHT_HS60) - IS31FL3733_set_color_all( red, green, blue ); +#if defined(RGB_BACKLIGHT_M6_B) + IS31FL3218_set_color_all( red, green, blue ); +#elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) + IS31FL3733_set_color_all( red, green, blue ); #else - IS31FL3731_set_color_all( red, green, blue ); + IS31FL3731_set_color_all( red, green, blue ); #endif } void backlight_set_key_hit(uint8_t row, uint8_t column) { - uint8_t led; - map_row_column_to_led(row,column,&led); - g_key_hit[led] = 0; + uint8_t led; + map_row_column_to_led(row,column,&led); + g_key_hit[led] = 0; - g_any_key_hit = 0; + g_any_key_hit = 0; } -#if !defined(RGB_BACKLIGHT_HS60) +#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) // This is (F_CPU/1024) / 20 Hz // = 15625 Hz / 20 Hz // = 781 @@ -686,95 +876,95 @@ void backlight_set_key_hit(uint8_t row, uint8_t column) void backlight_timer_init(void) { - static uint8_t backlight_timer_is_init = 0; - if ( backlight_timer_is_init ) - { - return; - } - backlight_timer_is_init = 1; - - // Timer 3 setup - TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP - _BV(CS32) | _BV(CS30); // prescale by /1024 - // Set TOP value - uint8_t sreg = SREG; - cli(); - - OCR3AH = (TIMER3_TOP >> 8) & 0xff; - OCR3AL = TIMER3_TOP & 0xff; - SREG = sreg; + static uint8_t backlight_timer_is_init = 0; + if ( backlight_timer_is_init ) + { + return; + } + backlight_timer_is_init = 1; + + // Timer 3 setup + TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP + _BV(CS32) | _BV(CS30); // prescale by /1024 + // Set TOP value + uint8_t sreg = SREG; + cli(); + + OCR3AH = (TIMER3_TOP >> 8) & 0xff; + OCR3AL = TIMER3_TOP & 0xff; + SREG = sreg; } void backlight_timer_enable(void) { - TIMSK3 |= _BV(OCIE3A); + TIMSK3 |= _BV(OCIE3A); } void backlight_timer_disable(void) { - TIMSK3 &= ~_BV(OCIE3A); + TIMSK3 &= ~_BV(OCIE3A); } #else //STM32, use GPT with TIM4. Enable in halconf.h static void gpt_backlight_timer_task(GPTDriver *gptp); // Timer setup at 200Khz, callback at 10k ticks = 20Hz static GPTConfig gpt4cfg1 = { - .frequency = 200000U, - .callback = gpt_backlight_timer_task + .frequency = 200000U, + .callback = gpt_backlight_timer_task }; void backlight_timer_init(void) { - gptStart(&GPTD4, &gpt4cfg1); + gptStart(&GPTD4, &gpt4cfg1); } void backlight_timer_enable(void) { - gptStartContinuous(&GPTD4, 10000); + gptStartContinuous(&GPTD4, 10000); } void backlight_timer_disable(void) { - gptStopTimer(&GPTD4); + gptStopTimer(&GPTD4); } -#endif //!defined(RGB_BACKLIGHT_HS60) +#endif //!defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) void backlight_set_suspend_state(bool state) { - g_suspend_state = state; + g_suspend_state = state; } void backlight_set_indicator_state(uint8_t state) { - g_indicator_state = state; + g_indicator_state = state; } void backlight_effect_rgb_test(void) { - // Mask out bits 4 and 5 - // This 2-bit value will stay the same for 16 ticks. - switch ( (g_tick & 0x30) >> 4 ) - { - case 0: - { - backlight_set_color_all( 255, 0, 0 ); - break; - } - case 1: - { - backlight_set_color_all( 0, 255, 0 ); - break; - } - case 2: - { - backlight_set_color_all( 0, 0, 255 ); - break; - } - case 3: - { - backlight_set_color_all( 255, 255, 255 ); - break; - } - } + // Mask out bits 4 and 5 + // This 2-bit value will stay the same for 16 ticks. + switch ( (g_tick & 0x30) >> 4 ) + { + case 0: + { + backlight_set_color_all( 255, 0, 0 ); + break; + } + case 1: + { + backlight_set_color_all( 0, 255, 0 ); + break; + } + case 2: + { + backlight_set_color_all( 0, 0, 255 ); + break; + } + case 3: + { + backlight_set_color_all( 255, 255, 255 ); + break; + } + } } #if defined(RGB_DEBUGGING_ONLY) @@ -785,1179 +975,1221 @@ void backlight_effect_rgb_test(void) // ONLY USE THIS FOR TESTING LEDS! void backlight_effect_single_LED_test(void) { - static uint8_t color = 0; // 0,1,2 for R,G,B - static uint8_t row = 0; - static uint8_t column = 0; - - static uint8_t tick = 0; - tick++; - - if ( tick > 2 ) - { - tick = 0; - column++; - } - if ( column > 14 ) - { - column = 0; - row++; - } - if ( row > 4 ) - { - row = 0; - color++; - } - if ( color > 2 ) - { - color = 0; - } - - uint8_t led; - map_row_column_to_led( row, column, &led ); - backlight_set_color_all( 255, 255, 255 ); - backlight_test_led( led, color==0, color==1, color==2 ); + static uint8_t color = 0; // 0,1,2 for R,G,B + static uint8_t row = 0; + static uint8_t column = 0; + + static uint8_t tick = 0; + tick++; + + if ( tick > 2 ) + { + tick = 0; + column++; + } + if ( column > 14 ) + { + column = 0; + row++; + } + if ( row > 4 ) + { + row = 0; + color++; + } + if ( color > 2 ) + { + color = 0; + } + + uint8_t led; + map_row_column_to_led( row, column, &led ); + backlight_set_color_all( 255, 255, 255 ); + backlight_test_led( led, color==0, color==1, color==2 ); } #endif // defined(RGB_DEBUGGING_ONLY) // All LEDs off void backlight_effect_all_off(void) { - backlight_set_color_all( 0, 0, 0 ); + backlight_set_color_all( 0, 0, 0 ); } // Solid color void backlight_effect_solid_color(void) { - HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness }; - RGB rgb = hsv_to_rgb( hsv ); - backlight_set_color_all( rgb.r, rgb.g, rgb.b ); + HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness }; + RGB rgb = hsv_to_rgb( hsv ); + backlight_set_color_all( rgb.r, rgb.g, rgb.b ); } // alphas = color1, mods = color2 void backlight_effect_alphas_mods(void) { - RGB rgb1 = hsv_to_rgb( (HSV){ .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness } ); - RGB rgb2 = hsv_to_rgb( (HSV){ .h = g_config.color_2.h, .s = g_config.color_2.s, .v = g_config.brightness } ); - - for ( int row = 0; row < MATRIX_ROWS; row++ ) - { - for ( int column = 0; column < MATRIX_COLS; column++ ) - { - uint8_t index; - map_row_column_to_led( row, column, &index ); - if ( index < BACKLIGHT_LED_COUNT ) - { - if ( ( g_config.alphas_mods[row] & (1< 127 ) - { - deltaH -= 256; - } - else if ( deltaH < -127 ) - { - deltaH += 256; - } - // Divide delta by 4, this gives the delta per row - deltaH /= 4; - - int16_t s1 = g_config.color_1.s; - int16_t s2 = g_config.color_2.s; - int16_t deltaS = ( s2 - s1 ) / 4; - - HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness }; - RGB rgb; - Point point; - for ( int i=0; i>4); - // Relies on hue being 8-bit and wrapping - hsv.h = g_config.color_1.h + ( deltaH * y ); - hsv.s = g_config.color_1.s + ( deltaS * y ); - rgb = hsv_to_rgb( hsv ); - backlight_set_color( i, rgb.r, rgb.g, rgb.b ); - } + int16_t h1 = g_config.color_1.h; + int16_t h2 = g_config.color_2.h; + int16_t deltaH = h2 - h1; + + // Take the shortest path between hues + if ( deltaH > 127 ) + { + deltaH -= 256; + } + else if ( deltaH < -127 ) + { + deltaH += 256; + } + // Divide delta by 4, this gives the delta per row + deltaH /= 4; + + int16_t s1 = g_config.color_1.s; + int16_t s2 = g_config.color_2.s; + int16_t deltaS = ( s2 - s1 ) / 4; + + HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness }; + RGB rgb; + Point point; + for ( int i=0; i>4); + // Relies on hue being 8-bit and wrapping + hsv.h = g_config.color_1.h + ( deltaH * y ); + hsv.s = g_config.color_1.s + ( deltaS * y ); + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } } void backlight_effect_raindrops(bool initialize) { - int16_t h1 = g_config.color_1.h; - int16_t h2 = g_config.color_2.h; - int16_t deltaH = h2 - h1; - deltaH /= 4; - - // Take the shortest path between hues - if ( deltaH > 127 ) - { - deltaH -= 256; - } - else if ( deltaH < -127 ) - { - deltaH += 256; - } - - int16_t s1 = g_config.color_1.s; - int16_t s2 = g_config.color_2.s; - int16_t deltaS = ( s2 - s1 ) / 4; - - HSV hsv; - RGB rgb; - - // Change one LED every tick - uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255; - - for ( int i=0; i 127 ) + { + deltaH -= 256; + } + else if ( deltaH < -127 ) + { + deltaH += 256; + } + + int16_t s1 = g_config.color_1.s; + int16_t s2 = g_config.color_2.s; + int16_t deltaS = ( s2 - s1 ) / 4; + + HSV hsv; + RGB rgb; + + // Change one LED every tick + uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255; + + for ( int i=0; i> 2; - hsv.h = g_config.color_1.h + offset2; - hsv.s = 127 + ( point.y >> 1 ); - rgb = hsv_to_rgb( hsv ); - backlight_set_color( i, rgb.r, rgb.g, rgb.b ); - } + uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF; + + HSV hsv = { .h = 0, .s = g_config.color_1.s, .v = g_config.brightness }; + RGB rgb; + Point point; + for ( int i=0; i> 2; + hsv.h = g_config.color_1.h + offset2; + hsv.s = 127 + ( point.y >> 1 ); + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } } #if defined(RGB_BACKLIGHT_M6_B) void backlight_effect_custom_colors(void) { - RGB rgb; - for ( uint8_t i = 0; i < 6; i++ ) - { - HSV hsv = { .h = g_config.custom_color[i].h, .s = g_config.custom_color[i].s, .v = g_config.brightness }; - rgb = hsv_to_rgb( hsv ); - uint8_t led; - map_row_column_to_led( 0, i, &led ); - backlight_set_color( led, rgb.r, rgb.g, rgb.b ); - } + RGB rgb; + for ( uint8_t i = 0; i < 6; i++ ) + { + HSV hsv = { .h = g_config.custom_color[i].h, .s = g_config.custom_color[i].s, .v = g_config.brightness }; + rgb = hsv_to_rgb( hsv ); + uint8_t led; + map_row_column_to_led( 0, i, &led ); + backlight_set_color( led, rgb.r, rgb.g, rgb.b ); + } } #endif void backlight_effect_indicators_set_colors( uint8_t index, HS color ) { - HSV hsv = { .h = color.h, .s = color.s, .v = g_config.brightness }; - RGB rgb = hsv_to_rgb( hsv ); - if ( index == 254 ) - { - backlight_set_color_all( rgb.r, rgb.g, rgb.b ); - } - else - { - backlight_set_color( index, rgb.r, rgb.g, rgb.b ); - - // If the spacebar LED is the indicator, - // do the same for the spacebar stabilizers - if ( index == 36+0 ) // LC0 - { -#if defined (RGB_BACKLIGHT_ZEAL65) - backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7 - backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 -#elif defined (RGB_BACKLIGHT_KOYU) - backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 - backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 -#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) - backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 - backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13 - if ( g_config.use_7u_spacebar ) - { - backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 - } + HSV hsv = { .h = color.h, .s = color.s, .v = g_config.brightness }; + RGB rgb = hsv_to_rgb( hsv ); + if ( index == 254 ) + { + backlight_set_color_all( rgb.r, rgb.g, rgb.b ); + } + else + { + backlight_set_color( index, rgb.r, rgb.g, rgb.b ); + + // If the spacebar LED is the indicator, + // do the same for the spacebar stabilizers + if ( index == 36+0 ) // LC0 + { +#if defined(RGB_BACKLIGHT_ZEAL65) + backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7 + backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 +#elif defined(RGB_BACKLIGHT_KOYU) + backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 + backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 +#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A) + backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 + backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13 + if ( g_config.use_7u_spacebar ) + { + backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 + } #endif - } - } + } + } } // This runs after another backlight effect and replaces // colors already set void backlight_effect_indicators(void) { - if ( g_config.caps_lock_indicator.index != 255 && - ( g_indicator_state & (1< 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20)); - uint8_t effect = suspend_backlight ? 0 : g_config.effect; - - // Keep track of the effect used last time, - // detect change in effect, so each effect can - // have an optional initialization. - static uint8_t effect_last = 255; - bool initialize = effect != effect_last; - effect_last = effect; - - // this gets ticked at 20 Hz. - // each effect can opt to do calculations - // and/or request PWM buffer updates. - switch ( effect ) - { - case 0: - backlight_effect_all_off(); - break; - case 1: - backlight_effect_solid_color(); - break; - case 2: + // delay 1 second before driving LEDs or doing anything else + static uint8_t startup_tick = 0; + if ( startup_tick < 20 ) + { + startup_tick++; + return; + } + + g_tick++; + + if ( g_any_key_hit < 0xFFFFFFFF ) + { + g_any_key_hit++; + } + + for ( int led = 0; led < BACKLIGHT_LED_COUNT; led++ ) + { + if ( g_key_hit[led] < 255 ) + { + g_key_hit[led]++; + } + } + + // Factory default magic value + if ( g_config.effect == 255 ) + { + backlight_effect_rgb_test(); + return; + } + + // Ideally we would also stop sending zeros to the LED driver PWM buffers + // while suspended and just do a software shutdown. This is a cheap hack for now. + bool suspend_backlight = ((g_suspend_state && g_config.disable_when_usb_suspended) || + (g_config.disable_after_timeout > 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20)); + uint8_t effect = suspend_backlight ? 0 : g_config.effect; + + // Keep track of the effect used last time, + // detect change in effect, so each effect can + // have an optional initialization. + static uint8_t effect_last = 255; + bool initialize = effect != effect_last; + effect_last = effect; + + // this gets ticked at 20 Hz. + // each effect can opt to do calculations + // and/or request PWM buffer updates. + switch ( effect ) + { + case 0: + backlight_effect_all_off(); + break; + case 1: + backlight_effect_solid_color(); + break; + case 2: #if defined(RGB_BACKLIGHT_M6_B) - backlight_effect_custom_colors(); + backlight_effect_custom_colors(); #else - backlight_effect_alphas_mods(); + backlight_effect_alphas_mods(); #endif - break; - case 3: - backlight_effect_gradient_up_down(); - break; - case 4: - backlight_effect_raindrops( initialize ); - break; - case 5: - backlight_effect_cycle_all(); - break; - case 6: - backlight_effect_cycle_left_right(); - break; - case 7: - backlight_effect_cycle_up_down(); - break; - case 8: - backlight_effect_jellybean_raindrops( initialize ); - break; - case 9: - backlight_effect_cycle_radial1(); - break; - case 10: - backlight_effect_cycle_radial2(); - break; - default: - backlight_effect_all_off(); - break; - } - - if ( ! suspend_backlight ) - { + break; + case 3: + backlight_effect_gradient_up_down(); + break; + case 4: + backlight_effect_raindrops( initialize ); + break; + case 5: + backlight_effect_cycle_all(); + break; + case 6: + backlight_effect_cycle_left_right(); + break; + case 7: + backlight_effect_cycle_up_down(); + break; + case 8: + backlight_effect_jellybean_raindrops( initialize ); + break; + case 9: + backlight_effect_cycle_radial1(); + break; + case 10: + backlight_effect_cycle_radial2(); + break; + default: + backlight_effect_all_off(); + break; + } + + if ( ! suspend_backlight ) + { #if !defined(RGB_BACKLIGHT_M6_B) - backlight_effect_indicators(); + backlight_effect_indicators(); #endif - } + } } void backlight_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column ) { - if ( row >= MATRIX_ROWS ) - { - // Special value, 255=none, 254=all - *index = row; - } - else - { - map_row_column_to_led( row, column, index ); - } + if ( row >= MATRIX_ROWS ) + { + // Special value, 255=none, 254=all + *index = row; + } + else + { + map_row_column_to_led( row, column, index ); + } } void backlight_get_indicator_row_col( uint8_t index, uint8_t *row, uint8_t *column ) { - if ( index == 255 || index == 254 ) - { - // Special value, 255=none, 254=all - *row = index; - *column = 0; - return; - } - for ( uint8_t r = 0; r < MATRIX_ROWS; r++ ) - { - for ( uint8_t c = 0; c < MATRIX_COLS; c++ ) - { - uint8_t i = 255; - map_row_column_to_led( r, c, &i ); - if ( i == index ) - { - *row = r; - *column = c; - return; - } - } - } + if ( index == 255 || index == 254 ) + { + // Special value, 255=none, 254=all + *row = index; + *column = 0; + return; + } + for ( uint8_t r = 0; r < MATRIX_ROWS; r++ ) + { + for ( uint8_t c = 0; c < MATRIX_COLS; c++ ) + { + uint8_t i = 255; + map_row_column_to_led( r, c, &i ); + if ( i == index ) + { + *row = r; + *column = c; + return; + } + } + } } // Some helpers for setting/getting HSV void _set_color( HS *color, uint8_t *data ) { - color->h = data[0]; - color->s = data[1]; + color->h = data[0]; + color->s = data[1]; } void _get_color( HS *color, uint8_t *data ) { - data[0] = color->h; - data[1] = color->s; + data[0] = color->h; + data[1] = color->s; } void backlight_config_set_value( uint8_t *data ) { - bool reinitialize = false; - uint8_t *value_id = &(data[0]); - uint8_t *value_data = &(data[1]); - switch ( *value_id ) - { + bool reinitialize = false; + uint8_t *value_id = &(data[0]); + uint8_t *value_data = &(data[1]); + switch ( *value_id ) + { #if defined (RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) - case id_use_split_backspace: - { - g_config.use_split_backspace = (bool)*value_data; - reinitialize = true; - break; - } + case id_use_split_backspace: + { + g_config.use_split_backspace = (bool)*value_data; + reinitialize = true; + break; + } #endif #if defined (RGB_BACKLIGHT_ZEAL60) - case id_use_split_left_shift: - { - g_config.use_split_left_shift = (bool)*value_data; - reinitialize = true; - break; - } - case id_use_split_right_shift: - { - g_config.use_split_right_shift = (bool)*value_data; - reinitialize = true; - break; - } - case id_use_7u_spacebar: - { - g_config.use_7u_spacebar = (bool)*value_data; - reinitialize = true; - break; - } - case id_use_iso_enter: - { - g_config.use_iso_enter = (bool)*value_data; - reinitialize = true; - break; - } - case id_disable_hhkb_blocker_leds: - { - g_config.disable_hhkb_blocker_leds = (bool)*value_data; - reinitialize = true; - break; - } + case id_use_split_left_shift: + { + g_config.use_split_left_shift = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_split_right_shift: + { + g_config.use_split_right_shift = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_7u_spacebar: + { + g_config.use_7u_spacebar = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_iso_enter: + { + g_config.use_iso_enter = (bool)*value_data; + reinitialize = true; + break; + } + case id_disable_hhkb_blocker_leds: + { + g_config.disable_hhkb_blocker_leds = (bool)*value_data; + reinitialize = true; + break; + } #endif - case id_disable_when_usb_suspended: - { - g_config.disable_when_usb_suspended = (bool)*value_data; - break; - } - case id_disable_after_timeout: - { - g_config.disable_after_timeout = *value_data; - break; - } - case id_brightness: - { - g_config.brightness = *value_data; - break; - } - case id_effect: - { - g_config.effect = *value_data; - break; - } - case id_effect_speed: - { - g_config.effect_speed = *value_data; - break; - } - case id_color_1: - { - _set_color( &(g_config.color_1), value_data ); - break; - } - case id_color_2: - { - _set_color( &(g_config.color_2), value_data ); - break; - } - case id_caps_lock_indicator_color: - { - _set_color( &(g_config.caps_lock_indicator.color), value_data ); - break; - } - case id_caps_lock_indicator_row_col: - { - backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] ); - break; - } - case id_layer_1_indicator_color: - { - _set_color( &(g_config.layer_1_indicator.color), value_data ); - break; - } - case id_layer_1_indicator_row_col: - { - backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] ); - break; - } - case id_layer_2_indicator_color: - { - _set_color( &(g_config.layer_2_indicator.color), value_data ); - break; - } - case id_layer_2_indicator_row_col: - { - backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] ); - break; - } - case id_layer_3_indicator_color: - { - _set_color( &(g_config.layer_3_indicator.color), value_data ); - break; - } - case id_layer_3_indicator_row_col: - { - backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] ); - break; - } - case id_alphas_mods: - { - for ( int i=0; i<5; i++ ) - { - g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) ); - } - } + case id_disable_when_usb_suspended: + { + g_config.disable_when_usb_suspended = (bool)*value_data; + break; + } + case id_disable_after_timeout: + { + g_config.disable_after_timeout = *value_data; + break; + } + case id_brightness: + { + g_config.brightness = *value_data; + break; + } + case id_effect: + { + g_config.effect = *value_data; + break; + } + case id_effect_speed: + { + g_config.effect_speed = *value_data; + break; + } + case id_color_1: + { + _set_color( &(g_config.color_1), value_data ); + break; + } + case id_color_2: + { + _set_color( &(g_config.color_2), value_data ); + break; + } + case id_caps_lock_indicator_color: + { + _set_color( &(g_config.caps_lock_indicator.color), value_data ); + break; + } + case id_caps_lock_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_1_indicator_color: + { + _set_color( &(g_config.layer_1_indicator.color), value_data ); + break; + } + case id_layer_1_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_2_indicator_color: + { + _set_color( &(g_config.layer_2_indicator.color), value_data ); + break; + } + case id_layer_2_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_3_indicator_color: + { + _set_color( &(g_config.layer_3_indicator.color), value_data ); + break; + } + case id_layer_3_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_alphas_mods: + { + for ( int i=0; i<5; i++ ) + { + g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) ); + } + } #if defined(RGB_BACKLIGHT_M6_B) - case id_custom_color: - { - uint8_t index = value_data[0]; - if ( index >= 0 && index <= 6 ) - { - _set_color( &(g_config.custom_color[index]), &(value_data[1]) ); - } - } + case id_custom_color: + { + uint8_t index = value_data[0]; + if ( index >= 0 && index <= 6 ) + { + _set_color( &(g_config.custom_color[index]), &(value_data[1]) ); + } + } #endif - } + } - if ( reinitialize ) - { - backlight_init_drivers(); - } + if ( reinitialize ) + { + backlight_init_drivers(); + } } void backlight_config_get_value( uint8_t *data ) { - uint8_t *value_id = &(data[0]); - uint8_t *value_data = &(data[1]); - switch ( *value_id ) - { - case id_use_split_backspace: - { - *value_data = ( g_config.use_split_backspace ? 1 : 0 ); - break; - } - case id_use_split_left_shift: - { - *value_data = ( g_config.use_split_left_shift ? 1 : 0 ); - break; - } - case id_use_split_right_shift: - { - *value_data = ( g_config.use_split_right_shift ? 1 : 0 ); - break; - } - case id_use_7u_spacebar: - { - *value_data = ( g_config.use_7u_spacebar ? 1 : 0 ); - break; - } - case id_use_iso_enter: - { - *value_data = ( g_config.use_iso_enter ? 1 : 0 ); - break; - } - case id_disable_when_usb_suspended: - { - *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 ); - break; - } - case id_disable_hhkb_blocker_leds: - { - *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 ); - break; - } - case id_disable_after_timeout: - { - *value_data = g_config.disable_after_timeout; - break; - } - case id_brightness: - { - *value_data = g_config.brightness; - break; - } - case id_effect: - { - *value_data = g_config.effect; - break; - } - case id_effect_speed: - { - *value_data = g_config.effect_speed; - break; - } - case id_color_1: - { - _get_color( &(g_config.color_1), value_data ); - break; - } - case id_color_2: - { - _get_color( &(g_config.color_2), value_data ); - break; - } - case id_caps_lock_indicator_color: - { - _get_color( &(g_config.caps_lock_indicator.color), value_data ); - break; - } - case id_caps_lock_indicator_row_col: - { - backlight_get_indicator_row_col( g_config.caps_lock_indicator.index, &(value_data[0]), &(value_data[1]) ); - break; - } - case id_layer_1_indicator_color: - { - _get_color( &(g_config.layer_1_indicator.color), value_data ); - break; - } - case id_layer_1_indicator_row_col: - { - backlight_get_indicator_row_col( g_config.layer_1_indicator.index, &(value_data[0]), &(value_data[1]) ); - break; - } - case id_layer_2_indicator_color: - { - _get_color( &(g_config.layer_2_indicator.color), value_data ); - break; - } - case id_layer_2_indicator_row_col: - { - backlight_get_indicator_row_col( g_config.layer_2_indicator.index, &(value_data[0]), &(value_data[1]) ); - break; - } - case id_layer_3_indicator_color: - { - _get_color( &(g_config.layer_3_indicator.color), value_data ); - break; - } - case id_layer_3_indicator_row_col: - { - backlight_get_indicator_row_col( g_config.layer_3_indicator.index, &(value_data[0]), &(value_data[1]) ); - break; - } - case id_alphas_mods: - { - for ( int i=0; i<5; i++ ) - { - *(value_data+i*2) = g_config.alphas_mods[i] >> 8; - *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF; - } - } + uint8_t *value_id = &(data[0]); + uint8_t *value_data = &(data[1]); + switch ( *value_id ) + { + case id_use_split_backspace: + { + *value_data = ( g_config.use_split_backspace ? 1 : 0 ); + break; + } + case id_use_split_left_shift: + { + *value_data = ( g_config.use_split_left_shift ? 1 : 0 ); + break; + } + case id_use_split_right_shift: + { + *value_data = ( g_config.use_split_right_shift ? 1 : 0 ); + break; + } + case id_use_7u_spacebar: + { + *value_data = ( g_config.use_7u_spacebar ? 1 : 0 ); + break; + } + case id_use_iso_enter: + { + *value_data = ( g_config.use_iso_enter ? 1 : 0 ); + break; + } + case id_disable_when_usb_suspended: + { + *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 ); + break; + } + case id_disable_hhkb_blocker_leds: + { + *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 ); + break; + } + case id_disable_after_timeout: + { + *value_data = g_config.disable_after_timeout; + break; + } + case id_brightness: + { + *value_data = g_config.brightness; + break; + } + case id_effect: + { + *value_data = g_config.effect; + break; + } + case id_effect_speed: + { + *value_data = g_config.effect_speed; + break; + } + case id_color_1: + { + _get_color( &(g_config.color_1), value_data ); + break; + } + case id_color_2: + { + _get_color( &(g_config.color_2), value_data ); + break; + } + case id_caps_lock_indicator_color: + { + _get_color( &(g_config.caps_lock_indicator.color), value_data ); + break; + } + case id_caps_lock_indicator_row_col: + { + backlight_get_indicator_row_col( g_config.caps_lock_indicator.index, &(value_data[0]), &(value_data[1]) ); + break; + } + case id_layer_1_indicator_color: + { + _get_color( &(g_config.layer_1_indicator.color), value_data ); + break; + } + case id_layer_1_indicator_row_col: + { + backlight_get_indicator_row_col( g_config.layer_1_indicator.index, &(value_data[0]), &(value_data[1]) ); + break; + } + case id_layer_2_indicator_color: + { + _get_color( &(g_config.layer_2_indicator.color), value_data ); + break; + } + case id_layer_2_indicator_row_col: + { + backlight_get_indicator_row_col( g_config.layer_2_indicator.index, &(value_data[0]), &(value_data[1]) ); + break; + } + case id_layer_3_indicator_color: + { + _get_color( &(g_config.layer_3_indicator.color), value_data ); + break; + } + case id_layer_3_indicator_row_col: + { + backlight_get_indicator_row_col( g_config.layer_3_indicator.index, &(value_data[0]), &(value_data[1]) ); + break; + } + case id_alphas_mods: + { + for ( int i=0; i<5; i++ ) + { + *(value_data+i*2) = g_config.alphas_mods[i] >> 8; + *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF; + } + } #if defined(RGB_BACKLIGHT_M6_B) - case id_custom_color: - { - uint8_t index = value_data[0]; - if ( index >= 0 && index <= 6 ) - { - _get_color( &(g_config.custom_color[index]), &(value_data[1]) ); - } - } + case id_custom_color: + { + uint8_t index = value_data[0]; + if ( index >= 0 && index <= 6 ) + { + _get_color( &(g_config.custom_color[index]), &(value_data[1]) ); + } + } #endif - } + } } void backlight_config_set_alphas_mods( uint16_t *alphas_mods ) { - for ( int i=0; i<5; i++ ) - { - g_config.alphas_mods[i] = alphas_mods[i]; - } + for ( int i=0; i<5; i++ ) + { + g_config.alphas_mods[i] = alphas_mods[i]; + } - backlight_config_save(); + backlight_config_save(); } void backlight_config_load(void) { - eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); + eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); } void backlight_config_save(void) { - eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); + eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); } void backlight_init_drivers(void) { - // Initialize I2C - i2c_init(); + // Initialize I2C + i2c_init(); #if defined(RGB_BACKLIGHT_M6_B) - IS31FL3218_init(); + IS31FL3218_init(); #elif defined(RGB_BACKLIGHT_HS60) - IS31FL3733_init( ISSI_ADDR_1 ); - - for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ ) - { -#if defined (HS60_ANSI) - bool enabled = !( ( index == 48-1 ) || //LA48 - ( index == 51-1 ) || //LA51 - ( index == 61-1 ) ); //LA61 -#elif defined (HS60_HHKB) - bool enabled = !( ( index == 61-1 ) || //LA61 - ( index == 62-1 ) ); //LA62 + IS31FL3733_init( ISSI_ADDR_1, 0 ); + + for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) + { +#if defined(HS60_ANSI) + bool enabled = !( ( index == 48-1 ) || //LA48 + ( index == 51-1 ) || //LA51 + ( index == 61-1 ) ); //LA61 +#elif defined(HS60_HHKB) + bool enabled = !( ( index == 61-1 ) || //LA61 + ( index == 62-1 ) ); //LA62 #else //HS60_ISO - bool enabled = !( ( index == 51-1 ) || //LA51 - ( index == 61-1 ) ); //LA61 + bool enabled = !( ( index == 51-1 ) || //LA51 + ( index == 61-1 ) ); //LA61 #endif - // This only caches it for later - IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); - } - // This actually updates the LED drivers - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); + // This only caches it for later + IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); + } + // This actually updates the LED drivers + IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); +#elif defined(RGB_BACKLIGHT_NK65) + IS31FL3733_init( ISSI_ADDR_1, 0 ); + IS31FL3733_init( ISSI_ADDR_2, 0 ); + + for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) + { + bool enabled = !( ( index == 61-1 ) || //LA61 + ( index > 6+64-1 ) ); //LB7-LB64 + // This only caches it for later + IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); + } + IS31FL3733_set_led_control_register( 7+64-1, 0, 1, 0 ); //Enable LB7 green enable for indicators + // This actually updates the LED drivers + IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); + IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #else - IS31FL3731_init( ISSI_ADDR_1 ); - IS31FL3731_init( ISSI_ADDR_2 ); - - for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ ) - { - // OR the possible "disabled" cases together, then NOT the result to get the enabled state - // LC6 LD13 not present on Zeal65 -#if defined (RGB_BACKLIGHT_ZEAL65) - bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 - ( index == 36+6 ) || // LC6 - ( index == 54+13 ) ); // LD13 -#elif defined (RGB_BACKLIGHT_KOYU) - bool enabled = !( ( index == 36+15 ) || // LC15 - ( index == 54+13 ) || // LD13 - ( index == 54+17 ) ); // LD17 -#elif defined (RGB_BACKLIGHT_M60_A) - bool enabled = !( - // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A - ( index == 18+6 ) || // LB6 - ( index == 18+7 ) || // LB7 - ( index == 18+8 ) || // LB8 - ( index == 18+15 ) || // LB15 - ( index == 18+16 ) || // LB16 - ( index == 18+17 ) || // LB17 - // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A - ( index == 36+17 ) || // LC17 - ( index == 54+17 ) || // LD17 - ( index == 36+15 ) || // LC15 - ( index == 54+13 ) ); // LD13 -#elif defined (RGB_BACKLIGHT_ZEAL60) - // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60 - bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 - ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15 - ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8 - ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13 - ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17 - ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17 - ( index == 18+6 ) || // LB6 - ( index == 18+7 ) || // LB7 - ( index == 18+8 ) || // LB8 - ( index == 18+15 ) || // LB15 - ( index == 18+16 ) || // LB16 - ( index == 18+17 ) ); // LB17 + IS31FL3731_init( ISSI_ADDR_1 ); + IS31FL3731_init( ISSI_ADDR_2 ); + + for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) + { + // OR the possible "disabled" cases together, then NOT the result to get the enabled state + // LC6 LD13 not present on Zeal65 +#if defined(RGB_BACKLIGHT_ZEAL65) + bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 + ( index == 36+6 ) || // LC6 + ( index == 54+13 ) ); // LD13 +#elif defined(RGB_BACKLIGHT_KOYU) + bool enabled = !( ( index == 36+15 ) || // LC15 + ( index == 54+13 ) || // LD13 + ( index == 54+17 ) ); // LD17 +#elif defined(RGB_BACKLIGHT_M60_A) + bool enabled = !( + // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A + ( index == 18+6 ) || // LB6 + ( index == 18+7 ) || // LB7 + ( index == 18+8 ) || // LB8 + ( index == 18+15 ) || // LB15 + ( index == 18+16 ) || // LB16 + ( index == 18+17 ) || // LB17 + // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A + ( index == 36+17 ) || // LC17 + ( index == 54+17 ) || // LD17 + ( index == 36+15 ) || // LC15 + ( index == 54+13 ) ); // LD13 +#elif defined(RGB_BACKLIGHT_ZEAL60) + // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60 + bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 + ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15 + ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8 + ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13 + ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17 + ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17 + ( index == 18+6 ) || // LB6 + ( index == 18+7 ) || // LB7 + ( index == 18+8 ) || // LB8 + ( index == 18+15 ) || // LB15 + ( index == 18+16 ) || // LB16 + ( index == 18+17 ) ); // LB17 #endif - // This only caches it for later - IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); - } - // This actually updates the LED drivers - IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); + // This only caches it for later + IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); + } + // This actually updates the LED drivers + IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); #endif // !defined(RGB_BACKLIGHT_M6_B) - // TODO: put the 1 second startup delay here? + // TODO: put the 1 second startup delay here? - // clear the key hits - for ( int led=0; ledevent.pressed ) - { - backlight_set_key_hit( record->event.key.row, record->event.key.col ); - } - - switch(keycode) - { - case BR_INC: - if (record->event.pressed) - { - backlight_brightness_increase(); - } - return false; - break; - case BR_DEC: - if (record->event.pressed) - { - backlight_brightness_decrease(); - } - return false; - break; - case EF_INC: - if (record->event.pressed) - { - backlight_effect_increase(); - } - return false; - break; - case EF_DEC: - if (record->event.pressed) - { - backlight_effect_decrease(); - } - return false; - break; - case ES_INC: - if (record->event.pressed) - { - backlight_effect_speed_increase(); - } - return false; - break; - case ES_DEC: - if (record->event.pressed) - { - backlight_effect_speed_decrease(); - } - return false; - break; - case H1_INC: - if (record->event.pressed) - { - backlight_color_1_hue_increase(); - } - return false; - break; - case H1_DEC: - if (record->event.pressed) - { - backlight_color_1_hue_decrease(); - } - return false; - break; - case S1_INC: - if (record->event.pressed) - { - backlight_color_1_sat_increase(); - } - return false; - break; - case S1_DEC: - if (record->event.pressed) - { - backlight_color_1_sat_decrease(); - break; - } - return false; - break; - case H2_INC: - if (record->event.pressed) - { - backlight_color_2_hue_increase(); - } - return false; - break; - case H2_DEC: - if (record->event.pressed) - { - backlight_color_2_hue_decrease(); - } - return false; - break; - case S2_INC: - if (record->event.pressed) - { - backlight_color_2_sat_increase(); - } - return false; - break; - case S2_DEC: - if (record->event.pressed) - { - backlight_color_2_sat_decrease(); - break; - } - return false; - break; - } - - return true; + // Record keypresses for backlight effects + if ( record->event.pressed ) + { + backlight_set_key_hit( record->event.key.row, record->event.key.col ); + } + + switch(keycode) + { + case BR_INC: + if (record->event.pressed) + { + backlight_brightness_increase(); + } + return false; + break; + case BR_DEC: + if (record->event.pressed) + { + backlight_brightness_decrease(); + } + return false; + break; + case EF_INC: + if (record->event.pressed) + { + backlight_effect_increase(); + } + return false; + break; + case EF_DEC: + if (record->event.pressed) + { + backlight_effect_decrease(); + } + return false; + break; + case ES_INC: + if (record->event.pressed) + { + backlight_effect_speed_increase(); + } + return false; + break; + case ES_DEC: + if (record->event.pressed) + { + backlight_effect_speed_decrease(); + } + return false; + break; + case H1_INC: + if (record->event.pressed) + { + backlight_color_1_hue_increase(); + } + return false; + break; + case H1_DEC: + if (record->event.pressed) + { + backlight_color_1_hue_decrease(); + } + return false; + break; + case S1_INC: + if (record->event.pressed) + { + backlight_color_1_sat_increase(); + } + return false; + break; + case S1_DEC: + if (record->event.pressed) + { + backlight_color_1_sat_decrease(); + break; + } + return false; + break; + case H2_INC: + if (record->event.pressed) + { + backlight_color_2_hue_increase(); + } + return false; + break; + case H2_DEC: + if (record->event.pressed) + { + backlight_color_2_hue_decrease(); + } + return false; + break; + case S2_INC: + if (record->event.pressed) + { + backlight_color_2_sat_increase(); + } + return false; + break; + case S2_DEC: + if (record->event.pressed) + { + backlight_color_2_sat_decrease(); + break; + } + return false; + break; + } + + return true; } // Deals with the messy details of incrementing an integer uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) { - int16_t new_value = value; - new_value += step; - return MIN( MAX( new_value, min ), max ); + int16_t new_value = value; + new_value += step; + return MIN( MAX( new_value, min ), max ); } uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) { - int16_t new_value = value; - new_value -= step; - return MIN( MAX( new_value, min ), max ); + int16_t new_value = value; + new_value -= step; + return MIN( MAX( new_value, min ), max ); } void backlight_effect_increase(void) { - g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); - backlight_config_save(); + g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); + backlight_config_save(); } void backlight_effect_decrease(void) { - g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); - backlight_config_save(); + g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); + backlight_config_save(); } void backlight_effect_speed_increase(void) { - g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 ); - backlight_config_save(); + g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 ); + backlight_config_save(); } void backlight_effect_speed_decrease(void) { - g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 ); - backlight_config_save(); + g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 ); + backlight_config_save(); } void backlight_brightness_increase(void) { - g_config.brightness = increment( g_config.brightness, 8, 0, 255 ); - backlight_config_save(); + g_config.brightness = increment( g_config.brightness, 8, 0, 255 ); + backlight_config_save(); } void backlight_brightness_decrease(void) { - g_config.brightness = decrement( g_config.brightness, 8, 0, 255 ); - backlight_config_save(); + g_config.brightness = decrement( g_config.brightness, 8, 0, 255 ); + backlight_config_save(); } void backlight_color_1_hue_increase(void) { - g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 ); - backlight_config_save(); + g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 ); + backlight_config_save(); } void backlight_color_1_hue_decrease(void) { - g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 ); - backlight_config_save(); + g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 ); + backlight_config_save(); } void backlight_color_1_sat_increase(void) { - g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 ); - backlight_config_save(); + g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 ); + backlight_config_save(); } void backlight_color_1_sat_decrease(void) { - g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 ); - backlight_config_save(); + g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 ); + backlight_config_save(); } void backlight_color_2_hue_increase(void) { - g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 ); - backlight_config_save(); + g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 ); + backlight_config_save(); } void backlight_color_2_hue_decrease(void) { - g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 ); - backlight_config_save(); + g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 ); + backlight_config_save(); } void backlight_color_2_sat_increase(void) { - g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 ); - backlight_config_save(); + g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 ); + backlight_config_save(); } void backlight_color_2_sat_decrease(void) { - g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 ); - backlight_config_save(); + g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 ); + backlight_config_save(); } #if defined(RGB_DEBUGGING_ONLY) void backlight_test_led( uint8_t index, bool red, bool green, bool blue ) { - for ( int i=0; i