From b5677853453d7fa1a9c15c2fed5e4fd1d8258b58 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 1 Aug 2019 17:20:31 +0100 Subject: [PATCH] [Docs] Add dfu-util and caterina udev examples (#6429) --- docs/faq_build.md | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/docs/faq_build.md b/docs/faq_build.md index bcf017a9b2..3fe358edaf 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -19,7 +19,11 @@ Note that running `make` with `sudo` is generally ***not*** a good idea, and you ### Linux `udev` Rules On Linux, you'll need proper privileges to access the MCU. You can either use -`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. +`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following: +```console +sudo udevadm control --reload-rules +sudo udevadm trigger +``` **/etc/udev/rules.d/50-atmel-dfu.rules:** ``` @@ -43,6 +47,28 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666" ``` +**/etc/udev/rules.d/55-catalina.rules:** +``` +# ModemManager should ignore the following devices +ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1" +ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1" +``` + +**Note:** ModemManager filtering only works when not in strict mode, the following commands can update that settings: +```console +sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service +sudo systemctl daemon-reload +sudo systemctl restart ModemManager +``` + +**/etc/udev/rules.d/56-dfu-util.rules:** +``` +# stm32duino +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="0666" +# Generic stm32 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666" +``` + ### Serial device is not detected in bootloader mode on Linux Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.