- Updated gh60 files

pull/966/head
dbroqua 8 years ago
parent e9f69ff46e
commit b7696fb3b0

@ -72,4 +72,4 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
{ K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \
}
#endif
#endif

@ -0,0 +1,112 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
# MIDI_ENABLE ?= YES # MIDI controls
# UNICODE_ENABLE ?= YES # Unicode
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
# RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

@ -0,0 +1,124 @@
#include "gh60.h"
#include "action_layer.h"
#define _DEFAULT 0
#define _FN 1
#define _WASD 2
//bool esc_led_on;
enum planck_keycodes {
DEFAULT = SAFE_RANGE
};
// Fillers to make layering more clear
#define ______ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty gui/alt/space/alt/gui
* ,-----------------------------------------------------------------------------------------.
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
* |-----------------------------------------------------------------------------------------+
* | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
* |-----------------------------------------------------------------------------------------+
* | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
* |-----------------------------------------------------------------------------------------+
* | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN |
* |-----------------------------------------------------------------------------------------+
* |LGUI | LAlt | Space | RAlt |RGUI |
* `-----------------------------------------------------------------'
*/
[_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \
______, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, ______, ______ \
),
/* FN Layer
* ,-----------------------------------------------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
* |-----------------------------------------------------------------------------------------+
* | CAPS | | | | | | | | Psc | Slck| Paus| Up | | |
* |-----------------------------------------------------------------------------------------+
* | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| |
* |-----------------------------------------------------------------------------------------+
* | | Prev| Play| Next| | | + | - | End |PgDn| Down| | |
* |-----------------------------------------------------------------------------------------+
* | | | | Stop | |
* `-----------------------------------------------------------------'
*/
[_FN] = KEYMAP_HHKB( /* Layer 1 */
______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \
______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \
______, ______, ______, KC_FN1, KC_MSTP, ______, ______, ______ \
),
/* FN Layer
* ,-----------------------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |-----------------------------------------------------------------------------------------+
* | | | Up | | | | | | | | | | | |
* |-----------------------------------------------------------------------------------------+
* | | Left| Down|Right| | | | | | | | | |
* |-----------------------------------------------------------------------------------------+
* | | | | | | | | | | | | | |
* |-----------------------------------------------------------------------------------------+
* | | | | | |
* `-----------------------------------------------------------------'
*/
[_WASD] = KEYMAP_HHKB( /* Layer 1 */
______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
______, ______, KC_UP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
______, KC_LEFT, KC_DOWN, KC_RGHT, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______, \
______, ______, ______, ______, ______, ______, ______, ______ \
)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
return MACRO_NONE;
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
[1] = ACTION_LAYER_TOGGLE(2), // toggle wasd overlay
};
//bool process_record_user(uint16_t keycode, keyrecord_t *record) {
// switch (keycode) {
// case ESC_LED:
// if (record->event.pressed) {
// if (esc_led_on == true ){
// gh60_esc_led_off();
// }else{
// gh60_esc_led_on();
// }
// esc_led_on = !esc_led_on;
// }
// return false;
// break;
// }
// return true;
//}
void matrix_scan_user(void) {
uint32_t layer = layer_state;
if (layer & (1<<1)) {
gh60_fn_led_on();
} else {
gh60_fn_led_off();
}
if (layer & (1<<2)) {
gh60_wasd_leds_on();
} else {
gh60_wasd_leds_off();
}
};
Loading…
Cancel
Save