diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile
index 0c6442374c..04bf28a00c 100644
--- a/converter/ps2_usb/Makefile
+++ b/converter/ps2_usb/Makefile
@@ -1,5 +1,5 @@
# Target file name (without extension).
-TARGET = ps2_usb
+TARGET = ps2_usb_lufa
# Directory common source filess exist
TOP_DIR = ../..
@@ -7,69 +7,96 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
F_CPU = 16000000
-# Build Options
-# *Comment out* to disable the options.
#
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-NKRO_ENABLE = yes # USB Nkey Rollover
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
-PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
-#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
-#PS2_USE_BUSYWAIT = yes # uses primitive reference code
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c
-
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
-ifdef PS2_USE_USART
- SRC += protocol/ps2_usart.c
- OPT_DEFS += -DPS2_USE_USART
-endif
-ifdef PS2_USE_INT
- SRC += protocol/ps2.c
- OPT_DEFS += -DPS2_USE_INT
-endif
-ifdef PS2_USE_BUSYWAIT
- SRC += protocol/ps2.c
- OPT_DEFS += -DPS2_USE_BUSYWAIT
-endif
+# Build Options
+# comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-#CONFIG_H = config_pjrc_usart.h
-CONFIG_H = config.h
+# PS/2 Options
+#
+#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
+PS2_USE_BUSYWAIT = yes # uses primitive reference code
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
-
-include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.pjrc b/converter/ps2_usb/Makefile.pjrc
new file mode 100644
index 0000000000..0e175f8b45
--- /dev/null
+++ b/converter/ps2_usb/Makefile.pjrc
@@ -0,0 +1,75 @@
+# Target file name (without extension).
+TARGET = ps2_usb_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+# PS/2 Options
+#
+#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
+PS2_USE_BUSYWAIT = yes # uses primitive reference code
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/ps2_usb/config.h b/converter/ps2_usb/config.h
index 51cd271d78..c9bab1b072 100644
--- a/converter/ps2_usb/config.h
+++ b/converter/ps2_usb/config.h
@@ -22,6 +22,7 @@ along with this program. If not, see .
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6512
+#define DEVICE_VER 0x0001
#define MANUFACTURER t.m.k.
#define PRODUCT PS/2 keyboard converter
#define DESCRIPTION convert PS/2 keyboard to USB
@@ -39,10 +40,52 @@ along with this program. If not, see .
)
-/* legacy keymap support */
-#define USE_LEGACY_KEYMAP
+//#define NO_SUSPEND_POWER_DOWN
+/*
+ * PS/2 Busywait
+ */
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 5
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+#endif
+
+/*
+ * PS/2 Pin interrupt
+ */
+#ifdef PS2_USE_INT
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+#define PS2_INT_INIT() do { \
+ EICRA |= ((1<.
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 2
-
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
/* set DDR of CLOCK as input to be slave */
#define PS2_USART_INIT() do { \
@@ -85,7 +127,6 @@ along with this program. If not, see .
#define PS2_USART_RX_DATA UDR1
#define PS2_USART_ERROR (UCSR1A & ((1<.
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 0
-
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
/* set DDR of CLOCK as input to be slave */
#define PS2_USART_INIT() do { \
@@ -130,41 +170,4 @@ along with this program. If not, see .
#endif
#endif
-
-#ifdef PS2_USE_INT
-/* uses INT1 for clock line(ATMega32U4) */
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 1
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 2
-
-#define PS2_INT_INIT() do { \
- EICRA |= ((1<
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-/*
- * Keymap for PS/2 keyboard
- */
-#include
-#include
-#include
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-
-
-// Following macros help you to define a keymap with the form of actual keyboard layout.
-
-/* US layout plus all other various keys */
-#define KEYMAP_ALL( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
- \
- K61, /* for European ISO */ \
- K51, K13, K6A, K64, K67, /* for Japanese JIS */ \
- K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \
- KB7, KBF, KDE, /* System Power, Sleep, Wake */ \
- KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \
- KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \
- KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \
- K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \
- KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \
-) { \
- { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
- { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \
- { KC_##K18, KC_NO, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
- { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO }, \
- { KC_##K38, KC_NO, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \
- { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_NO, KC_##K54, KC_##K55, KC_NO, KC_##K57 }, \
- { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO, KC_##K5D, KC_NO, KC_##K5F }, \
- { KC_NO, KC_##K61, KC_NO, KC_NO, KC_##K64, KC_NO, KC_##K66, KC_##K67 }, \
- { KC_NO, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
- { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_##K83, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_##K90, KC_##K91, KC_NO, KC_NO, KC_##K94, KC_##K95, KC_NO, KC_NO }, \
- { KC_##K98, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K9F }, \
- { KC_##KA0, KC_##KA1, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_##KA7 }, \
- { KC_##KA8, KC_NO, KC_NO, KC_##KAB, KC_NO, KC_NO, KC_NO, KC_##KAF }, \
- { KC_##KB0, KC_NO, KC_##KB2, KC_NO, KC_##KB4, KC_NO, KC_NO, KC_##KB7 }, \
- { KC_##KB8, KC_NO, KC_##KBA, KC_##KBB, KC_NO, KC_NO, KC_NO, KC_##KBF }, \
- { KC_##KC0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_##KC8, KC_NO, KC_##KCA, KC_NO, KC_NO, KC_##KCD, KC_NO, KC_NO }, \
- { KC_##KD0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_##KDA, KC_NO, KC_NO, KC_NO, KC_##KDE, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_##KE9, KC_NO, KC_##KEB, KC_##KEC, KC_NO, KC_NO, KC_NO }, \
- { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO, KC_##KF4, KC_##KF5, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_##KFA, KC_NO, KC_##KFC, KC_##KFD, KC_##KFE, KC_NO }, \
-}
-
-/* US layout */
-#define KEYMAP( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
-) \
-KEYMAP_ALL( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
- \
- NUBS, \
- RO, KANA, JYEN, HENK, MHEN, \
- F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
- SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
- AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
- MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
- MAIL, CALCULATOR, MY_COMPUTER, \
- WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
- WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
-)
-
-/* ISO layout */
-#define KEYMAP_ISO( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,K5A, K6B,K73,K74,K79, \
- K12,K61,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
-) \
-KEYMAP_ALL( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
- \
- K61, \
- RO, KANA, JYEN, HENK, MHEN, \
- F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
- SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
- AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
- MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
- MAIL, CALCULATOR, MY_COMPUTER, \
- WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
- WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
-)
-
-/* JIS layout */
-#define KEYMAP_JIS( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
-) \
-KEYMAP_ALL( \
- K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
- K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
- K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
- K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
- K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
- K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
- \
- NUBS, \
- K51, K13, K6A, K64, K67, \
- F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
- SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
- AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
- MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
- MAIL, CALCULATOR, MY_COMPUTER, \
- WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
- WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
-)
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 5, // Fn0
- 6, // Fn1
- 0, // Fn2
- 0, // Fn3
- 0, // Fn4
- 0, // Fn5
- 0, // Fn6
- 0 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KC_SCLN, // Fn0
- KC_SLSH, // Fn1
- KC_NO, // Fn2
- KC_NO, // Fn3
- KC_NO, // Fn4
- KC_NO, // Fn5
- KC_NO, // Fn6
- KC_NO // Fn7
-};
-
-
-// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode.
-// See keycode.h for USB keycodes. You should omit a 'KC_' prefix of USB keycodes in keymap macro.
-// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS.
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: default
- * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
- * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
- * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
- * ,-----------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
- * |-----------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
- * |-----------------------------------------------------------| `-----------' |-----------| +|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
- * |-----------------------------------------------------------| ,---. |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
- * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
- * `-----------------------------------------------------------' `-----------' `---------------'
- * ; = Fn0(to Layer 5)
- * / = Fn1(to Layer 6)
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 1: plain Qwerty without layer switching
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |-----------------------------------------------------------|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 2: Colemak http://colemak.com
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \|
- * |-----------------------------------------------------------|
- * |BackSp| A| R| S| T| D| H| N| E| I| O| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| K| M| ,| ,| /|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 3: Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backspa|
- * |-----------------------------------------------------------|
- * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \|
- * |-----------------------------------------------------------|
- * |BackSp| A| O| E| U| I| D| H| T| N| S| -|Return |
- * |-----------------------------------------------------------|
- * |Shift | ;| Q| J| K| X| B| M| Wl V| Z|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,A, O, E, U, I, D, H, T, N, S, MINS, ENT, P4, P5, P6, PPLS,
- LSFT,SCLN,Q, J, K, X, B, M, W, V, Z, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 4: Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa|
- * |-----------------------------------------------------------|
- * |Tab | Q| D| R| W| B| J| F| U| P| ;| [| ]| \|
- * |-----------------------------------------------------------|
- * |CapsLo| A| S| H| T| G| Y| N| E| O| I| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| M| C| V| K| L| ,| ,| /|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- BSPC,A, S, H, T, G, Y, N, E, O, I, QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 5: Mouse keys
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
- * |-----------------------------------------------------------|
- * |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \|
- * |-----------------------------------------------------------|
- * |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return |
- * |-----------------------------------------------------------|
- * |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Mb1 |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
- * Vo = Volume, Mut = Mute
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, P4, P5, P6, PPLS,
- LSFT,VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, BTN1, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
- /* 6: Cursor keys
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
- * |-----------------------------------------------------------|
- * |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \|
- * |-----------------------------------------------------------|
- * |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS,
- LSFT,VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
- return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
- return pgm_read_byte(&fn_keycode[index]);
-}
diff --git a/converter/ps2_usb/keymap_common.c b/converter/ps2_usb/keymap_common.c
new file mode 100644
index 0000000000..241d2e33b1
--- /dev/null
+++ b/converter/ps2_usb/keymap_common.c
@@ -0,0 +1,30 @@
+/*
+Copyright 2011,2012,2013 Jun Wako
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
+{
+ return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/converter/ps2_usb/keymap_common.h b/converter/ps2_usb/keymap_common.h
new file mode 100644
index 0000000000..216a8dc020
--- /dev/null
+++ b/converter/ps2_usb/keymap_common.h
@@ -0,0 +1,174 @@
+/*
+Copyright 2011,2012,2013 Jun Wako
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include
+#include
+#include
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+// 32*8(256) byte array which converts PS/2 code into USB code
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+/* All keys */
+#define KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ K61, /* for European ISO */ \
+ K51, K13, K6A, K64, K67, /* for Japanese JIS */ \
+ K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \
+ KB7, KBF, KDE, /* System Power, Sleep, Wake */ \
+ KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \
+ KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \
+ KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \
+ K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \
+ KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \
+) { \
+ { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+ { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \
+ { KC_##K18, KC_NO, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
+ { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO }, \
+ { KC_##K38, KC_NO, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \
+ { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \
+ { KC_##K50, KC_##K51, KC_##K52, KC_NO, KC_##K54, KC_##K55, KC_NO, KC_##K57 }, \
+ { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO, KC_##K5D, KC_NO, KC_##K5F }, \
+ { KC_NO, KC_##K61, KC_NO, KC_NO, KC_##K64, KC_NO, KC_##K66, KC_##K67 }, \
+ { KC_NO, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \
+ { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
+ { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_##K83, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_##K90, KC_##K91, KC_NO, KC_NO, KC_##K94, KC_##K95, KC_NO, KC_NO }, \
+ { KC_##K98, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K9F }, \
+ { KC_##KA0, KC_##KA1, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_##KA7 }, \
+ { KC_##KA8, KC_NO, KC_NO, KC_##KAB, KC_NO, KC_NO, KC_NO, KC_##KAF }, \
+ { KC_##KB0, KC_NO, KC_##KB2, KC_NO, KC_##KB4, KC_NO, KC_NO, KC_##KB7 }, \
+ { KC_##KB8, KC_NO, KC_##KBA, KC_##KBB, KC_NO, KC_NO, KC_NO, KC_##KBF }, \
+ { KC_##KC0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_##KC8, KC_NO, KC_##KCA, KC_NO, KC_NO, KC_##KCD, KC_NO, KC_NO }, \
+ { KC_##KD0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KDA, KC_NO, KC_NO, KC_NO, KC_##KDE, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, KC_##KE9, KC_NO, KC_##KEB, KC_##KEC, KC_NO, KC_NO, KC_NO }, \
+ { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO, KC_##KF4, KC_##KF5, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KFA, KC_NO, KC_##KFC, KC_##KFD, KC_##KFE, KC_NO }, \
+}
+
+/* US layout */
+#define KEYMAP( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
+) \
+KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ NUBS, \
+ RO, KANA, JYEN, HENK, MHEN, \
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
+ SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
+ AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
+ MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
+ MAIL, CALCULATOR, MY_COMPUTER, \
+ WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
+ WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
+)
+
+/* ISO layout */
+#define KEYMAP_ISO( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,K5A, K6B,K73,K74,K79, \
+ K12,K61,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
+) \
+KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ K61, \
+ RO, KANA, JYEN, HENK, MHEN, \
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
+ SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
+ AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
+ MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
+ MAIL, CALCULATOR, MY_COMPUTER, \
+ WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
+ WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
+)
+
+/* JIS layout */
+#define KEYMAP_JIS( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
+) \
+KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ NUBS, \
+ K51, K13, K6A, K64, K67, \
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
+ SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
+ AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
+ MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
+ MAIL, CALCULATOR, MY_COMPUTER, \
+ WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
+ WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
+)
+
+#endif
diff --git a/converter/ps2_usb/keymap_plain.c b/converter/ps2_usb/keymap_plain.c
new file mode 100644
index 0000000000..9c6e7d9ff1
--- /dev/null
+++ b/converter/ps2_usb/keymap_plain.c
@@ -0,0 +1,50 @@
+/*
+Copyright 2011,2012,2013 Jun Wako
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+#include "keymap_common.h"
+
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: default
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
+ * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
+ * |-----------------------------------------------------------| `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `-----------------------------------------------------------' `-----------' `---------------'
+ * ; = Fn0(to Layer 5)
+ * / = Fn1(to Layer 6)
+ */
+ KEYMAP(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
+ LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
+ ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/converter/ps2_usb/matrix.c b/converter/ps2_usb/matrix.c
index 4187ea0601..45344c0f75 100644
--- a/converter/ps2_usb/matrix.c
+++ b/converter/ps2_usb/matrix.c
@@ -19,6 +19,7 @@ along with this program. If not, see .
#include
#include
#include
+#include "action.h"
#include "print.h"
#include "util.h"
#include "debug.h"
@@ -28,6 +29,7 @@ along with this program. If not, see .
static void matrix_make(uint8_t code);
static void matrix_break(uint8_t code);
+static void matrix_clear(void);
#ifdef MATRIX_HAS_GHOST
static bool matrix_has_ghost_in_row(uint8_t row);
#endif
@@ -83,6 +85,7 @@ uint8_t matrix_cols(void)
void matrix_init(void)
{
+ debug_enable = true;
ps2_host_init();
// initialize matrix state: all keys off
@@ -185,8 +188,8 @@ uint8_t matrix_scan(void)
matrix_break(PAUSE);
}
- uint8_t code;
- while ((code = ps2_host_recv())) {
+ uint8_t code = ps2_host_recv();
+ if (!ps2_error) {
switch (state) {
case INIT:
switch (code) {
@@ -207,11 +210,19 @@ uint8_t matrix_scan(void)
matrix_make(PRINT_SCREEN);
state = INIT;
break;
+ case 0x00: // Overrun [3]p.25
+ matrix_clear();
+ clear_keyboard();
+ print("Overrun\n");
+ state = INIT;
+ break;
default: // normal key make
if (code < 0x80) {
matrix_make(code);
} else {
- debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n");
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at INIT: %02X\n", code);
}
state = INIT;
}
@@ -232,7 +243,9 @@ uint8_t matrix_scan(void)
if (code < 0x80) {
matrix_make(code|0x80);
} else {
- debug("unexpected scan code at E0: "); debug_hex(code); debug("\n");
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at E0: %02X\n", code);
}
state = INIT;
}
@@ -247,11 +260,18 @@ uint8_t matrix_scan(void)
matrix_break(PRINT_SCREEN);
state = INIT;
break;
+ case 0xF0:
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at F0: F0(clear and cont.)\n");
+ break;
default:
if (code < 0x80) {
matrix_break(code);
} else {
- debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at F0: %02X\n", code);
}
state = INIT;
}
@@ -266,7 +286,9 @@ uint8_t matrix_scan(void)
if (code < 0x80) {
matrix_break(code|0x80);
} else {
- debug("unexpected scan code at E0_F0: "); debug_hex(code); debug("\n");
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at E0_F0: %02X\n", code);
}
state = INIT;
}
@@ -357,8 +379,15 @@ uint8_t matrix_scan(void)
default:
state = INIT;
}
- phex(code);
}
+
+ // TODO: request RESEND when error occurs?
+/*
+ if (PS2_IS_FAILED(ps2_error)) {
+ uint8_t ret = ps2_host_send(PS2_RESEND);
+ xprintf("Resend: %02X\n", ret);
+ }
+*/
return 1;
}
@@ -450,3 +479,9 @@ static void matrix_break(uint8_t code)
is_modified = true;
}
}
+
+inline
+static void matrix_clear(void)
+{
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+}
diff --git a/keyboard/onekey/Makefile.lufa b/keyboard/onekey/Makefile
similarity index 97%
rename from keyboard/onekey/Makefile.lufa
rename to keyboard/onekey/Makefile
index 60a84ba00d..78732e470d 100644
--- a/keyboard/onekey/Makefile.lufa
+++ b/keyboard/onekey/Makefile
@@ -116,8 +116,8 @@ CONSOLE_ENABLE = yes # Console for debug(+400)
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-PS2_USE_BUSYWAIT = yes # uses primitive reference code
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+#PS2_USE_BUSYWAIT = yes # uses primitive reference code
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
diff --git a/keyboard/onekey/README.md b/keyboard/onekey/README.md
index 6ccc999299..7413f3880e 100644
--- a/keyboard/onekey/README.md
+++ b/keyboard/onekey/README.md
@@ -1,5 +1,5 @@
Onekey
======
-Just one key keyboard for example. It sends 'a' key if pins PD0 and PD1 are short-circuited.
+Just one key keyboard for example. It sends 'a' key if pins PB0 and PB1 are short-circuited.
https://github.com/tmk/tmk_keyboard/issues/56
diff --git a/keyboard/onekey/config.h b/keyboard/onekey/config.h
index 1d2e052bf0..bf1d2b1ed3 100644
--- a/keyboard/onekey/config.h
+++ b/keyboard/onekey/config.h
@@ -73,7 +73,7 @@ along with this program. If not, see .
# define PS2_CLOCK_PORT PORTD
# define PS2_CLOCK_PIN PIND
# define PS2_CLOCK_DDR DDRD
-# define PS2_CLOCK_BIT 5
+# define PS2_CLOCK_BIT 1
# define PS2_DATA_PORT PORTD
# define PS2_DATA_PIN PIND
# define PS2_DATA_DDR DDRD
@@ -87,7 +87,7 @@ along with this program. If not, see .
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 5
+#define PS2_CLOCK_BIT 1
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
diff --git a/keyboard/onekey/matrix.c b/keyboard/onekey/matrix.c
index a0a14ff821..29df868321 100644
--- a/keyboard/onekey/matrix.c
+++ b/keyboard/onekey/matrix.c
@@ -139,29 +139,29 @@ uint8_t matrix_key_count(void)
/* Column pin configuration
* col: 0
- * pin: D0
+ * pin: B0
*/
static void init_cols(void)
{
// Input with pull-up(DDR:0, PORT:1)
- DDRD &= ~(1<<0);
- PORTD |= (1<<0);
+ DDRB &= ~(1<<0);
+ PORTB |= (1<<0);
}
static matrix_row_t read_cols(void)
{
- return (PIND&(1<<0) ? 0 : (1<<0));
+ return (PINB&(1<<0) ? 0 : (1<<0));
}
/* Row pin configuration
* row: 0
- * pin: D1
+ * pin: B1
*/
static void unselect_rows(void)
{
// Hi-Z(DDR:0, PORT:0) to unselect
- DDRD &= ~0b00000010;
- PORTD &= ~0b00000010;
+ DDRB &= ~0b00000010;
+ PORTB &= ~0b00000010;
}
static void select_row(uint8_t row)
@@ -169,8 +169,8 @@ static void select_row(uint8_t row)
// Output low(DDR:1, PORT:0) to select
switch (row) {
case 0:
- DDRD |= (1<<1);
- PORTD &= ~(1<<1);
+ DDRB |= (1<<1);
+ PORTB &= ~(1<<1);
break;
}
}
diff --git a/protocol.mk b/protocol.mk
index 0d5f06c7ec..7f561e62d6 100644
--- a/protocol.mk
+++ b/protocol.mk
@@ -8,12 +8,12 @@ ifdef PS2_MOUSE_ENABLE
endif
ifdef PS2_USE_BUSYWAIT
- SRC += protocol/ps2.c
+ SRC += protocol/ps2_busywait.c
OPT_DEFS += -DPS2_USE_BUSYWAIT
endif
ifdef PS2_USE_INT
- SRC += protocol/ps2.c
+ SRC += protocol/ps2_interrupt.c
OPT_DEFS += -DPS2_USE_INT
endif
diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c
index 04e8e78f38..eca51c8784 100644
--- a/protocol/lufa/lufa.c
+++ b/protocol/lufa/lufa.c
@@ -148,7 +148,6 @@ static void Console_Task(void)
*/
void EVENT_USB_Device_Connect(void)
{
- led_set(0x1f); // all on
}
void EVENT_USB_Device_Disconnect(void)
@@ -172,8 +171,9 @@ void EVENT_USB_Device_WakeUp()
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
-#endif
+ // NOTE: converters may not accept this
led_set(host_keyboard_leds());
+#endif
}
void EVENT_USB_Device_StartOfFrame(void)
diff --git a/protocol/pjrc/usb.c b/protocol/pjrc/usb.c
index 84c99972f2..393b36f78e 100644
--- a/protocol/pjrc/usb.c
+++ b/protocol/pjrc/usb.c
@@ -662,8 +662,9 @@ ISR(USB_GEN_vect)
suspend_wakeup_init();
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
-#endif
+ // NOTE: converters may not accept this
led_set(host_keyboard_leds());
+#endif
UDIEN |= (1<
+Copyright 2010,2011,2012,2013 Jun WAKO
This software is licensed with a Modified BSD License.
All of this is supposed to be Free Software, Open Source, DFSG-free,
@@ -37,32 +37,46 @@ POSSIBILITY OF SUCH DAMAGE.
#ifndef PS2_H
#define PS2_H
+
+#include
+#include
+#include
+
/*
* Primitive PS/2 Library for AVR
+ *
+ * PS/2 Resources
+ * --------------
+ * [1] The PS/2 Mouse/Keyboard Protocol
+ * http://www.computer-engineering.org/ps2protocol/
+ * Concise and thorough primer of PS/2 protocol.
+ *
+ * [2] Keyboard and Auxiliary Device Controller
+ * http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
+ * Signal Timing and Format
+ *
+ * [3] Keyboards(101- and 102-key)
+ * http://www.mcamafia.de/pdf/ibm_hitrc11.pdf
+ * Keyboard Layout, Scan Code Set, POR, and Commands.
+ *
+ * [4] PS/2 Reference Manuals
+ * http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
+ * Collection of IBM Personal System/2 documents.
+ *
+ * [5] TrackPoint Engineering Specifications for version 3E
+ * https://web.archive.org/web/20100526161812/http://wwwcssrv.almaden.ibm.com/trackpoint/download.html
*/
-
-
-/* port settings for clock and data line */
-#if !(defined(PS2_CLOCK_PORT) && \
- defined(PS2_CLOCK_PIN) && \
- defined(PS2_CLOCK_DDR) && \
- defined(PS2_CLOCK_BIT))
-# error "PS/2 clock port setting is required in config.h"
-#endif
-
-#if !(defined(PS2_DATA_PORT) && \
- defined(PS2_DATA_PIN) && \
- defined(PS2_DATA_DDR) && \
- defined(PS2_DATA_BIT))
-# error "PS/2 data port setting is required in config.h"
-#endif
-
#define PS2_ACK 0xFA
#define PS2_RESEND 0xFE
#define PS2_SET_LED 0xED
-#define PS2_ERR_NONE 0
-#define PS2_ERR_PARITY 0x10
+// TODO: error numbers
+#define PS2_ERR_NONE 0
+#define PS2_ERR_STARTBIT1 1
+#define PS2_ERR_STARTBIT2 2
+#define PS2_ERR_STARTBIT3 3
+#define PS2_ERR_PARITY 0x10
+#define PS2_ERR_NODATA 0x20
#define PS2_LED_SCROLL_LOCK 0
#define PS2_LED_NUM_LOCK 1
@@ -71,13 +85,101 @@ POSSIBILITY OF SUCH DAMAGE.
extern uint8_t ps2_error;
-/* host role */
void ps2_host_init(void);
uint8_t ps2_host_send(uint8_t data);
uint8_t ps2_host_recv_response(void);
uint8_t ps2_host_recv(void);
void ps2_host_set_led(uint8_t usb_led);
-/* device role */
+
+/* Check port settings for clock and data line */
+#if !(defined(PS2_CLOCK_PORT) && \
+ defined(PS2_CLOCK_PIN) && \
+ defined(PS2_CLOCK_DDR) && \
+ defined(PS2_CLOCK_BIT))
+# error "PS/2 clock port setting is required in config.h"
+#endif
+
+#if !(defined(PS2_DATA_PORT) && \
+ defined(PS2_DATA_PIN) && \
+ defined(PS2_DATA_DDR) && \
+ defined(PS2_DATA_BIT))
+# error "PS/2 data port setting is required in config.h"
+#endif
+
+/*--------------------------------------------------------------------
+ * static functions
+ *------------------------------------------------------------------*/
+static inline void clock_lo(void)
+{
+ PS2_CLOCK_PORT &= ~(1<
+
+This software is licensed with a Modified BSD License.
+All of this is supposed to be Free Software, Open Source, DFSG-free,
+GPL-compatible, and OK to use in both free and proprietary applications.
+Additions and corrections to this file are welcome.
+
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+* Neither the name of the copyright holders nor the names of
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*
+ * PS/2 protocol busywait version
+ */
+
+#include
+#include
+#include "ps2.h"
+#include "debug.h"
+
+
+#define WAIT(stat, us, err) do { \
+ if (!wait_##stat(us)) { \
+ ps2_error = err; \
+ goto ERROR; \
+ } \
+} while (0)
+
+
+uint8_t ps2_error = PS2_ERR_NONE;
+
+
+void ps2_host_init(void)
+{
+ // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20)
+ _delay_ms(2500);
+
+ inhibit();
+}
+
+uint8_t ps2_host_send(uint8_t data)
+{
+ bool parity = true;
+ ps2_error = PS2_ERR_NONE;
+
+ /* terminate a transmission if we have */
+ inhibit();
+ _delay_us(100); // 100us [4]p.13, [5]p.50
+
+ /* 'Request to Send' and Start bit */
+ data_lo();
+ clock_hi();
+ WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
+
+ /* Data bit */
+ for (uint8_t i = 0; i < 8; i++) {
+ _delay_us(15);
+ if (data&(1< PS2_ERR_STARTBIT3) {
+ xprintf("x%02X\n", ps2_error);
+ }
+ inhibit();
+ return 0;
+}
+
+/* send LED state to keyboard */
+void ps2_host_set_led(uint8_t led)
+{
+ ps2_host_send(0xED);
+ ps2_host_send(led);
+}
diff --git a/protocol/ps2.c b/protocol/ps2_interrupt.c
similarity index 54%
rename from protocol/ps2.c
rename to protocol/ps2_interrupt.c
index e5873a9bfa..259d254007 100644
--- a/protocol/ps2.c
+++ b/protocol/ps2_interrupt.c
@@ -35,47 +35,15 @@ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
+/*
+ * PS/2 protocol Pin interrupt version
+ */
+
#include
-#include
#include
#include
#include "ps2.h"
-#include "debug.h"
-
-
-#ifndef PS2_USE_INT
-static uint8_t recv_data(void);
-#endif
-static inline void clock_lo(void);
-static inline void clock_hi(void);
-static inline bool clock_in(void);
-static inline void data_lo(void);
-static inline void data_hi(void);
-static inline bool data_in(void);
-static inline uint16_t wait_clock_lo(uint16_t us);
-static inline uint16_t wait_clock_hi(uint16_t us);
-static inline uint16_t wait_data_lo(uint16_t us);
-static inline uint16_t wait_data_hi(uint16_t us);
-static inline void idle(void);
-static inline void inhibit(void);
-
-
-/*
-Primitive PS/2 Library for AVR
-==============================
-Host side is only supported now.
-
-
-I/O control
------------
-High state is asserted by input with pull up.
-
-
-PS/2 References
----------------
-http://www.computer-engineering.org/ps2protocol/
-http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
-*/
+#include "print.h"
#define WAIT(stat, us, err) do { \
@@ -89,35 +57,38 @@ http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
uint8_t ps2_error = PS2_ERR_NONE;
+static inline uint8_t pbuf_dequeue(void);
+static inline void pbuf_enqueue(uint8_t data);
+static inline bool pbuf_has_data(void);
+static inline void pbuf_clear(void);
+
+
void ps2_host_init(void)
{
-#ifdef PS2_USE_INT
+ idle();
PS2_INT_INIT();
PS2_INT_ON();
- idle();
-#else
- inhibit();
-#endif
+ // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20)
+ //_delay_ms(2500);
}
-// TODO: send using interrupt if available
uint8_t ps2_host_send(uint8_t data)
{
- uint8_t res = 0;
bool parity = true;
ps2_error = PS2_ERR_NONE;
-#ifdef PS2_USE_INT
+
PS2_INT_OFF();
-#endif
+
/* terminate a transmission if we have */
inhibit();
- _delay_us(200); // at least 100us
+ _delay_us(100); // 100us [4]p.13, [5]p.50
- /* start bit [1] */
+ /* 'Request to Send' and Start bit */
data_lo();
clock_hi();
- WAIT(clock_lo, 20000, 10); // may take 15ms at most until device starts clocking
- /* data [2-9] */
+ WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
+
+ /* Data bit[2-9] */
for (uint8_t i = 0; i < 8; i++) {
_delay_us(15);
if (data&(1<
-#include
#include
#include
#include "ps2.h"
-#include "debug.h"
+#include "print.h"
#define WAIT(stat, us, err) do { \
@@ -75,18 +57,6 @@ http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
uint8_t ps2_error = PS2_ERR_NONE;
-static inline void clock_lo(void);
-static inline void clock_hi(void);
-static inline bool clock_in(void);
-static inline void data_lo(void);
-static inline void data_hi(void);
-static inline bool data_in(void);
-static inline uint16_t wait_clock_lo(uint16_t us);
-static inline uint16_t wait_clock_hi(uint16_t us);
-static inline uint16_t wait_data_lo(uint16_t us);
-static inline uint16_t wait_data_hi(uint16_t us);
-static inline void idle(void);
-static inline void inhibit(void);
static inline uint8_t pbuf_dequeue(void);
static inline void pbuf_enqueue(uint8_t data);
static inline bool pbuf_has_data(void);
@@ -95,14 +65,15 @@ static inline void pbuf_clear(void);
void ps2_host_init(void)
{
- idle();
+ idle(); // without this many USART errors occur when cable is disconnected
PS2_USART_INIT();
PS2_USART_RX_INT_ON();
+ // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20)
+ //_delay_ms(2500);
}
uint8_t ps2_host_send(uint8_t data)
{
- uint8_t res = 0;
bool parity = true;
ps2_error = PS2_ERR_NONE;
@@ -110,13 +81,14 @@ uint8_t ps2_host_send(uint8_t data)
/* terminate a transmission if we have */
inhibit();
- _delay_us(100);
+ _delay_us(100); // [4]p.13
- /* start bit [1] */
+ /* 'Request to Send' and Start bit */
data_lo();
clock_hi();
- WAIT(clock_lo, 15000, 1);
- /* data [2-9] */
+ WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
+
+ /* Data bit[2-9] */
for (uint8_t i = 0; i < 8; i++) {
_delay_us(15);
if (data&(1<