Add support for Unikeyboard Felix

pull/1837/head
unknown 7 years ago committed by Jack Humbert
parent e094cd42b5
commit bccf263cd0

@ -0,0 +1,56 @@
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Unikeyboard
#define PRODUCT Felix
#define DESCRIPTION 4x5 number/macropad.
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 4
/* key matrix pins */
#define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 }
#define MATRIX_COL_PINS { B5, B4, E6, D7 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* number of backlight levels */
/* Not sure what pin controls the backlighting, need help for this. */
#define BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 5
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* prevent stuck modifiers */
#define PREVENT_STUCK_MODIFIERS
/* there is no rgb underglow by default. */
#define RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 16
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

@ -0,0 +1 @@
#include "felix.h"

@ -0,0 +1,20 @@
#ifndef FELIX_H
#define FELIX_H
#include "quantum.h"
#define KEYMAP( \
K000, K001, K002, K003, \
K100, K101, K102, K103, \
K200, K201, K202, K203, \
K300, K301, K302, K303, \
K400, K401, K402, K403 \
) { \
{ K000, K001, K002, K003 }, \
{ K100, K101, K102, K103 }, \
{ K200, K201, K202, K203 }, \
{ K300, K301, K302, K303 }, \
{ K400, K401, K402, K403 } \
}
#endif

@ -0,0 +1,22 @@
#include "felix.h"
#include "action_layer.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6, KC_HOME,
KC_P1, KC_P2, KC_P3, KC_END,
KC_P0, KC_PEQL, KC_PDOT, KC_PENT),
};
void persistant_default_layer_set(uint16_t default_layer) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
}
return true;
}

@ -0,0 +1,13 @@
# Felix
A customizable number/macropad made by Unikeyboard.
Keyboard Maintainer: [QMK Community](https://github.com/qmk)
Hardware Supported: Felix PCB, Pro Micro
Hardware Availability: [Unikeyboard](https://unikeyboard.io/product/felix/)
Make example for this keyboard (after setting up your build environment):
make felix-default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

@ -0,0 +1,56 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no
RGBLIGHT_ENABLE = no
Loading…
Cancel
Save