Florian Didron
6 years ago
committed by
GitHub
commit
bd66bf5f8f
@ -0,0 +1,240 @@
|
||||
#pragma once
|
||||
|
||||
#ifdef __AVR__
|
||||
#include <avr/io.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#elif defined(ESP8266)
|
||||
#include <pgmspace.h>
|
||||
#else
|
||||
#define PROGMEM
|
||||
#endif
|
||||
|
||||
// Helidox 8x6 font with QMK Firmware Logo
|
||||
// Online editor: http://teripom.x0.com/
|
||||
|
||||
static const unsigned char font[] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
|
||||
0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
|
||||
0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
|
||||
0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
|
||||
0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
|
||||
0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
|
||||
0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
|
||||
0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
|
||||
0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
|
||||
0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
|
||||
0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
|
||||
0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
|
||||
0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
|
||||
0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
|
||||
0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
|
||||
0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
|
||||
0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
|
||||
0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
|
||||
0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
|
||||
0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
|
||||
0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
|
||||
0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
|
||||
0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
|
||||
0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
|
||||
0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
|
||||
0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
|
||||
0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
|
||||
0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
|
||||
0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
|
||||
0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
|
||||
0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
|
||||
0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
|
||||
0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
|
||||
0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
|
||||
0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
|
||||
0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
|
||||
0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
|
||||
0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
|
||||
0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
|
||||
0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
|
||||
0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
|
||||
0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
|
||||
0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
|
||||
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
|
||||
0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
|
||||
0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
|
||||
0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
|
||||
0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
|
||||
0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
|
||||
0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
|
||||
0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
|
||||
0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
|
||||
0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
|
||||
0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
|
||||
0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
|
||||
0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
|
||||
0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
|
||||
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
|
||||
0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
|
||||
0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
|
||||
0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
|
||||
0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
|
||||
0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
|
||||
0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
|
||||
0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
|
||||
0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
|
||||
0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
|
||||
0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
|
||||
0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
|
||||
0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
|
||||
0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
|
||||
0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
|
||||
0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
|
||||
0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
|
||||
0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
|
||||
0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
|
||||
0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
|
||||
0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
|
||||
0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
|
||||
0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
|
||||
0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
|
||||
0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
|
||||
0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
|
||||
0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
|
||||
0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
|
||||
0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
|
||||
0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
|
||||
0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
|
||||
0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
|
||||
0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
|
||||
0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
|
||||
0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
|
||||
0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
|
||||
0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
|
||||
0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
|
||||
0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
|
||||
0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
|
||||
0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
|
||||
0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
|
||||
0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
|
||||
0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
|
||||
0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
|
||||
0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
|
||||
0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
|
||||
0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
|
||||
0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
|
||||
0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
|
||||
0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
|
||||
0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
|
||||
0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
|
||||
0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
|
||||
0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
|
||||
0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
|
||||
0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
|
||||
0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
|
||||
0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
|
||||
0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
|
||||
0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
|
||||
0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
|
||||
0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
|
||||
0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
|
||||
0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x40, 0x40, 0x40, 0xF0, 0xF8, 0xF8,
|
||||
0xFF, 0x38, 0xFF, 0xF8, 0xF8, 0x3F,
|
||||
0xF8, 0xF8, 0xFF, 0x38, 0xFF, 0xF8,
|
||||
0xF8, 0xF0, 0x40, 0x40, 0x40, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
|
||||
0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x00,
|
||||
0xC0, 0xC0, 0x80, 0x00, 0x00, 0x00,
|
||||
0x80, 0xC0, 0xC0, 0x00, 0xC0, 0xC0,
|
||||
0x00, 0x00, 0x80, 0xC0, 0xC0, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0,
|
||||
0xC0, 0xC0, 0xC0, 0x00, 0xC0, 0xC0,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
|
||||
0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
|
||||
0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
|
||||
0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
|
||||
0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
|
||||
0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
|
||||
0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
|
||||
0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
|
||||
0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF,
|
||||
0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x49, 0x49, 0x49, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xE0, 0xDF, 0xBF, 0xBF, 0x00,
|
||||
0xBF, 0xBF, 0xDF, 0xE0, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0x49, 0x49, 0x49, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x1F, 0x3F,
|
||||
0x60, 0x60, 0xE0, 0xBF, 0x1F, 0x00,
|
||||
0x7F, 0x7F, 0x07, 0x1E, 0x38, 0x1E,
|
||||
0x07, 0x7F, 0x7F, 0x00, 0x7F, 0x7F,
|
||||
0x0E, 0x1F, 0x3B, 0x71, 0x60, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x7F, 0x7F,
|
||||
0x0C, 0x0C, 0x0C, 0x00, 0x7E, 0x7E,
|
||||
0x00, 0x7F, 0x7E, 0x03, 0x03, 0x00,
|
||||
0x7F, 0x7E, 0x03, 0x03, 0x7E, 0x7E,
|
||||
0x03, 0x03, 0x7F, 0x7E, 0x00, 0x0F,
|
||||
0x3E, 0x70, 0x3C, 0x06, 0x3C, 0x70,
|
||||
0x3E, 0x0F, 0x00, 0x32, 0x7B, 0x49,
|
||||
0x49, 0x3F, 0x7E, 0x00, 0x7F, 0x7E,
|
||||
0x03, 0x03, 0x00, 0x1E, 0x3F, 0x69,
|
||||
0x69, 0x6F, 0x26, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
|
||||
0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
|
||||
0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
|
||||
0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
|
||||
0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
|
||||
0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
|
||||
0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
|
||||
0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
|
||||
0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01,
|
||||
0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F,
|
||||
0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x7E,
|
||||
0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F,
|
||||
0x0F, 0x07, 0x01, 0x01, 0x01, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x01, 0x01, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
};
|
||||
@ -0,0 +1,528 @@
|
||||
/*
|
||||
Copyright 2019 Ryan Caltabiano <https://github.com/XScorpion2>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "i2c_master.h"
|
||||
#include "oled_driver.h"
|
||||
#include OLED_FONT_H
|
||||
#include "timer.h"
|
||||
#include "print.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
#if defined(__AVR__)
|
||||
#include <avr/io.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#elif defined(ESP8266)
|
||||
#include <pgmspace.h>
|
||||
#else // defined(ESP8266)
|
||||
#define PROGMEM
|
||||
#define memcpy_P(des, src, len) memcpy(des, src, len)
|
||||
#endif // defined(__AVR__)
|
||||
|
||||
// Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
|
||||
// Fundamental Commands
|
||||
#define CONTRAST 0x81
|
||||
#define DISPLAY_ALL_ON 0xA5
|
||||
#define DISPLAY_ALL_ON_RESUME 0xA4
|
||||
#define NORMAL_DISPLAY 0xA6
|
||||
#define DISPLAY_ON 0xAF
|
||||
#define DISPLAY_OFF 0xAE
|
||||
|
||||
// Scrolling Commands
|
||||
#define ACTIVATE_SCROLL 0x2F
|
||||
#define DEACTIVATE_SCROLL 0x2E
|
||||
#define SCROLL_RIGHT 0x26
|
||||
#define SCROLL_LEFT 0x27
|
||||
#define SCROLL_RIGHT_UP 0x29
|
||||
#define SCROLL_LEFT_UP 0x2A
|
||||
|
||||
// Addressing Setting Commands
|
||||
#define MEMORY_MODE 0x20
|
||||
#define COLUMN_ADDR 0x21
|
||||
#define PAGE_ADDR 0x22
|
||||
|
||||
// Hardware Configuration Commands
|
||||
#define DISPLAY_START_LINE 0x40
|
||||
#define SEGMENT_REMAP 0xA0
|
||||
#define SEGMENT_REMAP_INV 0xA1
|
||||
#define MULTIPLEX_RATIO 0xA8
|
||||
#define COM_SCAN_INC 0xC0
|
||||
#define COM_SCAN_DEC 0xC8
|
||||
#define DISPLAY_OFFSET 0xD3
|
||||
#define COM_PINS 0xDA
|
||||
|
||||
// Timing & Driving Commands
|
||||
#define DISPLAY_CLOCK 0xD5
|
||||
#define PRE_CHARGE_PERIOD 0xD9
|
||||
#define VCOM_DETECT 0xDB
|
||||
|
||||
// Charge Pump Commands
|
||||
#define CHARGE_PUMP 0x8D
|
||||
|
||||
// Misc defines
|
||||
#define OLED_TIMEOUT 60000
|
||||
#define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
|
||||
#define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
|
||||
|
||||
// i2c defines
|
||||
#define I2C_CMD 0x00
|
||||
#define I2C_DATA 0x40
|
||||
#if defined(__AVR__)
|
||||
// already defined on ARM
|
||||
#define I2C_TIMEOUT 100
|
||||
#define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
|
||||
#else // defined(__AVR__)
|
||||
#define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
|
||||
#endif // defined(__AVR__)
|
||||
#define I2C_TRANSMIT(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
|
||||
#define I2C_WRITE_REG(mode, data, size) i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), mode, data, size, I2C_TIMEOUT)
|
||||
|
||||
#define HAS_FLAGS(bits, flags) ((bits & flags) == flags)
|
||||
|
||||
// Display buffer's is the same as the OLED memory layout
|
||||
// this is so we don't end up with rounding errors with
|
||||
// parts of the display unusable or don't get cleared correctly
|
||||
// and also allows for drawing & inverting
|
||||
uint8_t oled_buffer[OLED_MATRIX_SIZE];
|
||||
uint8_t* oled_cursor;
|
||||
OLED_BLOCK_TYPE oled_dirty = 0;
|
||||
bool oled_initialized = false;
|
||||
bool oled_active = false;
|
||||
bool oled_scrolling = false;
|
||||
uint8_t oled_rotation = 0;
|
||||
uint8_t oled_rotation_width = 0;
|
||||
#if !defined(OLED_DISABLE_TIMEOUT)
|
||||
uint16_t oled_last_activity;
|
||||
#endif
|
||||
|
||||
// Internal variables to reduce math instructions
|
||||
|
||||
#if defined(__AVR__)
|
||||
// identical to i2c_transmit, but for PROGMEM since all initialization is in PROGMEM arrays currently
|
||||
// probably should move this into i2c_master...
|
||||
static i2c_status_t i2c_transmit_P(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
|
||||
i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
|
||||
|
||||
for (uint16_t i = 0; i < length && status >= 0; i++) {
|
||||
status = i2c_write(pgm_read_byte((const char*)data++), timeout);
|
||||
if (status) break;
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return status;
|
||||
}
|
||||
#endif
|
||||
|
||||
// Flips the rendering bits for a character at the current cursor position
|
||||
static void InvertCharacter(uint8_t *cursor)
|
||||
{
|
||||
const uint8_t *end = cursor + OLED_FONT_WIDTH;
|
||||
while (cursor < end) {
|
||||
*cursor = ~(*cursor);
|
||||
cursor++;
|
||||
}
|
||||
}
|
||||
|
||||
bool oled_init(uint8_t rotation) {
|
||||
oled_rotation = oled_init_user(rotation);
|
||||
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
|
||||
oled_rotation_width = OLED_DISPLAY_WIDTH;
|
||||
} else {
|
||||
oled_rotation_width = OLED_DISPLAY_HEIGHT;
|
||||
}
|
||||
i2c_init();
|
||||
|
||||
static const uint8_t PROGMEM display_setup1[] = {
|
||||
I2C_CMD,
|
||||
DISPLAY_OFF,
|
||||
DISPLAY_CLOCK, 0x80,
|
||||
MULTIPLEX_RATIO, OLED_DISPLAY_HEIGHT - 1,
|
||||
DISPLAY_OFFSET, 0x00,
|
||||
DISPLAY_START_LINE | 0x00,
|
||||
CHARGE_PUMP, 0x14,
|
||||
MEMORY_MODE, 0x00, }; // Horizontal addressing mode
|
||||
if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_init cmd set 1 failed\n");
|
||||
return false;
|
||||
}
|
||||
|
||||
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) {
|
||||
static const uint8_t PROGMEM display_normal[] = {
|
||||
I2C_CMD,
|
||||
SEGMENT_REMAP_INV,
|
||||
COM_SCAN_DEC };
|
||||
if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_init cmd normal rotation failed\n");
|
||||
return false;
|
||||
}
|
||||
} else {
|
||||
static const uint8_t PROGMEM display_flipped[] = {
|
||||
I2C_CMD,
|
||||
SEGMENT_REMAP,
|
||||
COM_SCAN_INC };
|
||||
if (I2C_TRANSMIT_P(display_flipped) != I2C_STATUS_SUCCESS) {
|
||||
print("display_flipped failed\n");
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
static const uint8_t PROGMEM display_setup2[] = {
|
||||
I2C_CMD,
|
||||
COM_PINS, 0x02,
|
||||
CONTRAST, 0x8F,
|
||||
PRE_CHARGE_PERIOD, 0xF1,
|
||||
VCOM_DETECT, 0x40,
|
||||
DISPLAY_ALL_ON_RESUME,
|
||||
NORMAL_DISPLAY,
|
||||
DEACTIVATE_SCROLL,
|
||||
DISPLAY_ON };
|
||||
if (I2C_TRANSMIT_P(display_setup2) != I2C_STATUS_SUCCESS) {
|
||||
print("display_setup2 failed\n");
|
||||
return false;
|
||||
}
|
||||
|
||||
oled_clear();
|
||||
oled_initialized = true;
|
||||
oled_active = true;
|
||||
oled_scrolling = false;
|
||||
return true;
|
||||
}
|
||||
|
||||
__attribute__((weak))
|
||||
uint8_t oled_init_user(uint8_t rotation) {
|
||||
return rotation;
|
||||
}
|
||||
|
||||
void oled_clear(void) {
|
||||
memset(oled_buffer, 0, sizeof(oled_buffer));
|
||||
oled_cursor = &oled_buffer[0];
|
||||
oled_dirty = -1; // -1 will be max value as long as display_dirty is unsigned type
|
||||
}
|
||||
|
||||
static void calc_bounds(uint8_t update_start, uint8_t* cmd_array)
|
||||
{
|
||||
cmd_array[1] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH;
|
||||
cmd_array[4] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH;
|
||||
cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1];
|
||||
cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1;
|
||||
}
|
||||
|
||||
static void calc_bounds_90(uint8_t update_start, uint8_t* cmd_array)
|
||||
{
|
||||
cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
|
||||
cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT;
|
||||
cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];;
|
||||
cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8;
|
||||
}
|
||||
|
||||
uint8_t crot(uint8_t a, int8_t n)
|
||||
{
|
||||
const uint8_t mask = 0x7;
|
||||
n &= mask;
|
||||
return a << n | a >> (-n & mask);
|
||||
}
|
||||
|
||||
static void rotate_90(const uint8_t* src, uint8_t* dest)
|
||||
{
|
||||
for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) {
|
||||
uint8_t selector = (1 << i);
|
||||
for (uint8_t j = 0; j < 8; ++j) {
|
||||
dest[i] |= crot(src[j] & selector, shift - (int8_t)j);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void oled_render(void) {
|
||||
// Do we have work to do?
|
||||
if (!oled_dirty || oled_scrolling) {
|
||||
return;
|
||||
}
|
||||
|
||||
// Find first dirty block
|
||||
uint8_t update_start = 0;
|
||||
while (!(oled_dirty & (1 << update_start))) { ++update_start; }
|
||||
|
||||
// Set column & page position
|
||||
static uint8_t display_start[] = {
|
||||
I2C_CMD,
|
||||
COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1,
|
||||
PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1 };
|
||||
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
|
||||
calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
|
||||
} else {
|
||||
calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
|
||||
}
|
||||
|
||||
// Send column & page position
|
||||
if (I2C_TRANSMIT(display_start) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_render offset command failed\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
|
||||
// Send render data chunk as is
|
||||
if (I2C_WRITE_REG(I2C_DATA, &oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_render data failed\n");
|
||||
return;
|
||||
}
|
||||
} else {
|
||||
// Rotate the render chunks
|
||||
const static uint8_t source_map[] = OLED_SOURCE_MAP;
|
||||
const static uint8_t target_map[] = OLED_TARGET_MAP;
|
||||
|
||||
static uint8_t temp_buffer[OLED_BLOCK_SIZE];
|
||||
memset(temp_buffer, 0, sizeof(temp_buffer));
|
||||
for(uint8_t i = 0; i < sizeof(source_map); ++i) {
|
||||
rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]);
|
||||
}
|
||||
|
||||
// Send render data chunk after rotating
|
||||
if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_render data failed\n");
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
// Turn on display if it is off
|
||||
oled_on();
|
||||
|
||||
// Clear dirty flag
|
||||
oled_dirty &= ~(1 << update_start);
|
||||
}
|
||||
|
||||
void oled_set_cursor(uint8_t col, uint8_t line) {
|
||||
uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH;
|
||||
|
||||
// Out of bounds?
|
||||
if (index >= OLED_MATRIX_SIZE) {
|
||||
index = 0;
|
||||
}
|
||||
|
||||
oled_cursor = &oled_buffer[index];
|
||||
}
|
||||
|
||||
void oled_advance_page(bool clearPageRemainder) {
|
||||
uint16_t index = oled_cursor - &oled_buffer[0];
|
||||
uint8_t remaining = oled_rotation_width - (index % oled_rotation_width);
|
||||
|
||||
if (clearPageRemainder) {
|
||||
// Remaining Char count
|
||||
remaining = remaining / OLED_FONT_WIDTH;
|
||||
|
||||
// Write empty character until next line
|
||||
while (remaining--)
|
||||
oled_write_char(' ', false);
|
||||
} else {
|
||||
// Next page index out of bounds?
|
||||
if (index + remaining >= OLED_MATRIX_SIZE) {
|
||||
index = 0;
|
||||
remaining = 0;
|
||||
}
|
||||
|
||||
oled_cursor = &oled_buffer[index + remaining];
|
||||
}
|
||||
}
|
||||
|
||||
void oled_advance_char(void) {
|
||||
uint16_t nextIndex = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH;
|
||||
uint8_t remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width);
|
||||
|
||||
// Do we have enough space on the current line for the next character
|
||||
if (remainingSpace < OLED_FONT_WIDTH) {
|
||||
nextIndex += remainingSpace;
|
||||
}
|
||||
|
||||
// Did we go out of bounds
|
||||
if (nextIndex >= OLED_MATRIX_SIZE) {
|
||||
nextIndex = 0;
|
||||
}
|
||||
|
||||
// Update cursor position
|
||||
oled_cursor = &oled_buffer[nextIndex];
|
||||
}
|
||||
|
||||
// Main handler that writes character data to the display buffer
|
||||
void oled_write_char(const char data, bool invert) {
|
||||
// Advance to the next line if newline
|
||||
if (data == '\n') {
|
||||
// Old source wrote ' ' until end of line...
|
||||
oled_advance_page(true);
|
||||
return;
|
||||
}
|
||||
|
||||
// copy the current render buffer to check for dirty after
|
||||
static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
|
||||
memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);
|
||||
|
||||
// set the reder buffer data
|
||||
uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
|
||||
if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
|
||||
memset(oled_cursor, 0x00, OLED_FONT_WIDTH);
|
||||
} else {
|
||||
const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH];
|
||||
memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH);
|
||||
}
|
||||
|
||||
// Invert if needed
|
||||
if (invert) {
|
||||
InvertCharacter(oled_cursor);
|
||||
}
|
||||
|
||||
// Dirty check
|
||||
if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
|
||||
oled_dirty |= (1 << ((oled_cursor - &oled_buffer[0]) / OLED_BLOCK_SIZE));
|
||||
}
|
||||
|
||||
// Finally move to the next char
|
||||
oled_advance_char();
|
||||
}
|
||||
|
||||
void oled_write(const char *data, bool invert) {
|
||||
const char *end = data + strlen(data);
|
||||
while (data < end) {
|
||||
oled_write_char(*data, invert);
|
||||
data++;
|
||||
}
|
||||
}
|
||||
|
||||
void oled_write_ln(const char *data, bool invert) {
|
||||
oled_write(data, invert);
|
||||
oled_advance_page(true);
|
||||
}
|
||||
|
||||
#if defined(__AVR__)
|
||||
void oled_write_P(const char *data, bool invert) {
|
||||
uint8_t c = pgm_read_byte(data);
|
||||
while (c != 0) {
|
||||
oled_write_char(c, invert);
|
||||
c = pgm_read_byte(++data);
|
||||
}
|
||||
}
|
||||
|
||||
void oled_write_ln_P(const char *data, bool invert) {
|
||||
oled_write_P(data, invert);
|
||||
oled_advance_page(true);
|
||||
}
|
||||
#endif // defined(__AVR__)
|
||||
|
||||
bool oled_on(void) {
|
||||
#if !defined(OLED_DISABLE_TIMEOUT)
|
||||
oled_last_activity = timer_read();
|
||||
#endif
|
||||
|
||||
static const uint8_t PROGMEM display_on[] = { I2C_CMD, DISPLAY_ON };
|
||||
if (!oled_active) {
|
||||
if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_on cmd failed\n");
|
||||
return oled_active;
|
||||
}
|
||||
oled_active = true;
|
||||
}
|
||||
return oled_active;
|
||||
}
|
||||
|
||||
bool oled_off(void) {
|
||||
static const uint8_t PROGMEM display_off[] = { I2C_CMD, DISPLAY_OFF };
|
||||
if (oled_active) {
|
||||
if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_off cmd failed\n");
|
||||
return oled_active;
|
||||
}
|
||||
oled_active = false;
|
||||
}
|
||||
return !oled_active;
|
||||
}
|
||||
|
||||
bool oled_scroll_right(void) {
|
||||
// Dont enable scrolling if we need to update the display
|
||||
// This prevents scrolling of bad data from starting the scroll too early after init
|
||||
if (!oled_dirty && !oled_scrolling) {
|
||||
static const uint8_t PROGMEM display_scroll_right[] = {
|
||||
I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL };
|
||||
if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_scroll_right cmd failed\n");
|
||||
return oled_scrolling;
|
||||
}
|
||||
oled_scrolling = true;
|
||||
}
|
||||
return oled_scrolling;
|
||||
}
|
||||
|
||||
bool oled_scroll_left(void) {
|
||||
// Dont enable scrolling if we need to update the display
|
||||
// This prevents scrolling of bad data from starting the scroll too early after init
|
||||
if (!oled_dirty && !oled_scrolling) {
|
||||
static const uint8_t PROGMEM display_scroll_left[] = {
|
||||
I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL };
|
||||
if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_scroll_left cmd failed\n");
|
||||
return oled_scrolling;
|
||||
}
|
||||
oled_scrolling = true;
|
||||
}
|
||||
return oled_scrolling;
|
||||
}
|
||||
|
||||
bool oled_scroll_off(void) {
|
||||
if (oled_scrolling) {
|
||||
static const uint8_t PROGMEM display_scroll_off[] = { I2C_CMD, DEACTIVATE_SCROLL };
|
||||
if (I2C_TRANSMIT_P(display_scroll_off) != I2C_STATUS_SUCCESS) {
|
||||
print("oled_scroll_off cmd failed\n");
|
||||
return oled_scrolling;
|
||||
}
|
||||
oled_scrolling = false;
|
||||
}
|
||||
return !oled_scrolling;
|
||||
}
|
||||
|
||||
uint8_t oled_max_chars(void) {
|
||||
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
|
||||
return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH;
|
||||
}
|
||||
return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH;
|
||||
}
|
||||
|
||||
uint8_t oled_max_lines(void) {
|
||||
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
|
||||
return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT;
|
||||
}
|
||||
return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT;
|
||||
}
|
||||
|
||||
void oled_task(void) {
|
||||
if (!oled_initialized) {
|
||||
return;
|
||||
}
|
||||
|
||||
oled_set_cursor(0, 0);
|
||||
|
||||
oled_task_user();
|
||||
|
||||
// Smart render system, no need to check for dirty
|
||||
oled_render();
|
||||
|
||||
// Display timeout check
|
||||
#if !defined(OLED_DISABLE_TIMEOUT)
|
||||
if (oled_active && timer_elapsed(oled_last_activity) > OLED_TIMEOUT) {
|
||||
oled_off();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
__attribute__((weak))
|
||||
void oled_task_user(void) {
|
||||
}
|
||||
@ -0,0 +1,183 @@
|
||||
/*
|
||||
Copyright 2019 Ryan Caltabiano <https://github.com/XScorpion2>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
|
||||
#if defined(OLED_DISPLAY_CUSTOM)
|
||||
// Expected user to implement the necessary defines
|
||||
#elif defined(OLED_DISPLAY_128X64)
|
||||
// Double height 128x64
|
||||
#define OLED_DISPLAY_WIDTH 128
|
||||
#define OLED_DISPLAY_HEIGHT 64
|
||||
#define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed)
|
||||
#define OLED_BLOCK_TYPE uint16_t
|
||||
#define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed)
|
||||
#define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 64 (compile time mathed)
|
||||
|
||||
// For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
|
||||
// The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
|
||||
#define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
|
||||
#define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 }
|
||||
// If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
|
||||
// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 }
|
||||
// #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 }
|
||||
#else // defined(OLED_DISPLAY_128X64)
|
||||
// Default 128x32
|
||||
#define OLED_DISPLAY_WIDTH 128
|
||||
#define OLED_DISPLAY_HEIGHT 32
|
||||
#define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed)
|
||||
#define OLED_BLOCK_TYPE uint8_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only
|
||||
#define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed)
|
||||
#define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 128 (compile time mathed)
|
||||
|
||||
// For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
|
||||
// The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
|
||||
#define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
|
||||
#define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 }
|
||||
#endif // defined(OLED_DISPLAY_CUSTOM)
|
||||
|
||||
// Address to use for tthe i2d oled communication
|
||||
#if !defined(OLED_DISPLAY_ADDRESS)
|
||||
#define OLED_DISPLAY_ADDRESS 0x3C
|
||||
#endif
|
||||
|
||||
// Custom font file to use
|
||||
#if !defined(OLED_FONT_H)
|
||||
#define OLED_FONT_H "glcdfont.c"
|
||||
#endif
|
||||
// unsigned char value of the first character in the font file
|
||||
#if !defined(OLED_FONT_START)
|
||||
#define OLED_FONT_START 0
|
||||
#endif
|
||||
// unsigned char value of the last character in the font file
|
||||
#if !defined(OLED_FONT_END)
|
||||
#define OLED_FONT_END 224
|
||||
#endif
|
||||
// Font render width
|
||||
#if !defined(OLED_FONT_WIDTH)
|
||||
#define OLED_FONT_WIDTH 6
|
||||
#endif
|
||||
// Font render height
|
||||
#if !defined(OLED_FONT_HEIGHT)
|
||||
#define OLED_FONT_HEIGHT 8
|
||||
#endif
|
||||
|
||||
#define OLED_ROTATION_0 0x00
|
||||
#define OLED_ROTATION_90 0x01
|
||||
#define OLED_ROTATION_180 0x02
|
||||
#define OLED_ROTATION_270 0x03
|
||||
|
||||
// Initialize the oled display, rotating the rendered output based on the define passed in.
|
||||
// Returns true if the OLED was initialized successfully
|
||||
bool oled_init(uint8_t rotation);
|
||||
|
||||
// Called at the start of oled_init, weak function overridable by the user
|
||||
// rotation - the value passed into oled_init
|
||||
// Return new uint8_t if you want to override default rotation
|
||||
uint8_t oled_init_user(uint8_t rotation);
|
||||
|
||||
// Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering
|
||||
void oled_clear(void);
|
||||
|
||||
// Renders the dirty chunks of the buffer to oled display
|
||||
void oled_render(void);
|
||||
|
||||
// Moves cursor to character position indicated by column and line, wraps if out of bounds
|
||||
// Max column denoted by 'oled_max_chars()' and max lines by 'oled_max_lines()' functions
|
||||
void oled_set_cursor(uint8_t col, uint8_t line);
|
||||
|
||||
// Advances the cursor to the next page, writing ' ' if true
|
||||
// Wraps to the begining when out of bounds
|
||||
void oled_advance_page(bool clearPageRemainder);
|
||||
|
||||
// Moves the cursor forward 1 character length
|
||||
// Advance page if there is not enough room for the next character
|
||||
// Wraps to the begining when out of bounds
|
||||
void oled_advance_char(void);
|
||||
|
||||
// Writes a single character to the buffer at current cursor position
|
||||
// Advances the cursor while writing, inverts the pixels if true
|
||||
// Main handler that writes character data to the display buffer
|
||||
void oled_write_char(const char data, bool invert);
|
||||
|
||||
// Writes a string to the buffer at current cursor position
|
||||
// Advances the cursor while writing, inverts the pixels if true
|
||||
void oled_write(const char *data, bool invert);
|
||||
|
||||
// Writes a string to the buffer at current cursor position
|
||||
// Advances the cursor while writing, inverts the pixels if true
|
||||
// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
|
||||
void oled_write_ln(const char *data, bool invert);
|
||||
|
||||
#if defined(__AVR__)
|
||||
// Writes a PROGMEM string to the buffer at current cursor position
|
||||
// Advances the cursor while writing, inverts the pixels if true
|
||||
// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM
|
||||
void oled_write_P(const char *data, bool invert);
|
||||
|
||||
// Writes a PROGMEM string to the buffer at current cursor position
|
||||
// Advances the cursor while writing, inverts the pixels if true
|
||||
// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
|
||||
// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
|
||||
void oled_write_ln_P(const char *data, bool invert);
|
||||
#else
|
||||
// Writes a string to the buffer at current cursor position
|
||||
// Advances the cursor while writing, inverts the pixels if true
|
||||
#define oled_write_P(data, invert) oled_write(data, invert)
|
||||
|
||||
// Writes a string to the buffer at current cursor position
|
||||
// Advances the cursor while writing, inverts the pixels if true
|
||||
// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
|
||||
#define oled_write_ln_P(data, invert) oled_write(data, invert)
|
||||
#endif // defined(__AVR__)
|
||||
|
||||
// Can be used to manually turn on the screen if it is off
|
||||
// Returns true if the screen was on or turns on
|
||||
bool oled_on(void);
|
||||
|
||||
// Can be used to manually turn off the screen if it is on
|
||||
// Returns true if the screen was off or turns off
|
||||
bool oled_off(void);
|
||||
|
||||
// Basically it's oled_render, but with timeout management and oled_task_user calling!
|
||||
void oled_task(void);
|
||||
|
||||
// Called at the start of oled_task, weak function overridable by the user
|
||||
void oled_task_user(void);
|
||||
|
||||
// Scrolls the entire display right
|
||||
// Returns true if the screen was scrolling or starts scrolling
|
||||
// NOTE: display contents cannot be changed while scrolling
|
||||
bool oled_scroll_right(void);
|
||||
|
||||
// Scrolls the entire display left
|
||||
// Returns true if the screen was scrolling or starts scrolling
|
||||
// NOTE: display contents cannot be changed while scrolling
|
||||
bool oled_scroll_left(void);
|
||||
|
||||
// Turns off display scrolling
|
||||
// Returns true if the screen was not scrolling or stops scrolling
|
||||
bool oled_scroll_off(void);
|
||||
|
||||
// Returns the maximum number of characters that will fit on a line
|
||||
uint8_t oled_max_chars(void);
|
||||
|
||||
// Returns the maximum number of lines that will fit on the oled
|
||||
uint8_t oled_max_lines(void);
|
||||
@ -0,0 +1,50 @@
|
||||
#pragma once
|
||||
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
||||
#if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS)
|
||||
|
||||
extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL];
|
||||
extern rgb_config_t rgb_matrix_config;
|
||||
extern last_hit_t g_last_hit_tracker;
|
||||
|
||||
static bool rgb_matrix_solid_reactive_multicross_range(uint8_t start, effect_params_t* params) {
|
||||
RGB_MATRIX_USE_LIMITS(led_min, led_max);
|
||||
|
||||
HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 };
|
||||
uint8_t count = g_last_hit_tracker.count;
|
||||
for (uint8_t i = led_min; i < led_max; i++) {
|
||||
hsv.v = 0;
|
||||
point_t point = g_rgb_leds[i].point;
|
||||
for (uint8_t j = start; j < count; j++) {
|
||||
int16_t dx = point.x - g_last_hit_tracker.x[j];
|
||||
int16_t dy = point.y - g_last_hit_tracker.y[j];
|
||||
uint8_t dist = sqrt16(dx * dx + dy * dy);
|
||||
int16_t dist2 = 16;
|
||||
uint8_t dist3;
|
||||
uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) + dist;
|
||||
dx = dx < 0 ? dx * -1 : dx;
|
||||
dy = dy < 0 ? dy * -1 : dy;
|
||||
dx = dx * dist2 > 255 ? 255 : dx * dist2;
|
||||
dy = dy * dist2 > 255 ? 255 : dy * dist2;
|
||||
dist3 = dx > dy ? dy : dx;
|
||||
effect += dist3;
|
||||
if (effect > 255)
|
||||
effect = 255;
|
||||
hsv.v = qadd8(hsv.v, 255 - effect);
|
||||
}
|
||||
hsv.v = scale8(hsv.v, rgb_matrix_config.val);
|
||||
RGB rgb = hsv_to_rgb(hsv);
|
||||
rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
|
||||
}
|
||||
return led_max < DRIVER_LED_TOTAL;
|
||||
}
|
||||
|
||||
bool rgb_matrix_solid_reactive_multicross(effect_params_t* params) {
|
||||
return rgb_matrix_solid_reactive_multicross_range(0, params);
|
||||
}
|
||||
|
||||
bool rgb_matrix_solid_reactive_cross(effect_params_t* params) {
|
||||
return rgb_matrix_solid_reactive_multicross_range(qsub8(g_last_hit_tracker.count, 1), params);
|
||||
}
|
||||
|
||||
#endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS)
|
||||
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
||||
@ -0,0 +1,48 @@
|
||||
#pragma once
|
||||
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
||||
#if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS)
|
||||
|
||||
extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL];
|
||||
extern rgb_config_t rgb_matrix_config;
|
||||
extern last_hit_t g_last_hit_tracker;
|
||||
|
||||
static bool rgb_matrix_solid_reactive_multinexus_range(uint8_t start, effect_params_t* params) {
|
||||
RGB_MATRIX_USE_LIMITS(led_min, led_max);
|
||||
|
||||
HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 };
|
||||
uint8_t count = g_last_hit_tracker.count;
|
||||
for (uint8_t i = led_min; i < led_max; i++) {
|
||||
hsv.v = 0;
|
||||
point_t point = g_rgb_leds[i].point;
|
||||
for (uint8_t j = start; j < count; j++) {
|
||||
int16_t dx = point.x - g_last_hit_tracker.x[j];
|
||||
int16_t dy = point.y - g_last_hit_tracker.y[j];
|
||||
uint8_t dist = sqrt16(dx * dx + dy * dy);
|
||||
int16_t dist2 = 8;
|
||||
uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) - dist;
|
||||
if (effect > 255)
|
||||
effect = 255;
|
||||
if (dist > 72)
|
||||
effect = 255;
|
||||
if ((dx > dist2 || dx < -dist2) && (dy > dist2 || dy < -dist2))
|
||||
effect = 255;
|
||||
hsv.v = qadd8(hsv.v, 255 - effect);
|
||||
hsv.h = rgb_matrix_config.hue + dy / 4;
|
||||
}
|
||||
hsv.v = scale8(hsv.v, rgb_matrix_config.val);
|
||||
RGB rgb = hsv_to_rgb(hsv);
|
||||
rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
|
||||
}
|
||||
return led_max < DRIVER_LED_TOTAL;
|
||||
}
|
||||
|
||||
bool rgb_matrix_solid_reactive_multinexus(effect_params_t* params) {
|
||||
return rgb_matrix_solid_reactive_multinexus_range(0, params);
|
||||
}
|
||||
|
||||
bool rgb_matrix_solid_reactive_nexus(effect_params_t* params) {
|
||||
return rgb_matrix_solid_reactive_multinexus_range(qsub8(g_last_hit_tracker.count, 1), params);
|
||||
}
|
||||
|
||||
#endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS)
|
||||
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
||||
@ -0,0 +1,42 @@
|
||||
#pragma once
|
||||
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
||||
#if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE)
|
||||
|
||||
extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL];
|
||||
extern rgb_config_t rgb_matrix_config;
|
||||
extern last_hit_t g_last_hit_tracker;
|
||||
|
||||
static bool rgb_matrix_solid_reactive_multiwide_range(uint8_t start, effect_params_t* params) {
|
||||
RGB_MATRIX_USE_LIMITS(led_min, led_max);
|
||||
|
||||
HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 };
|
||||
uint8_t count = g_last_hit_tracker.count;
|
||||
for (uint8_t i = led_min; i < led_max; i++) {
|
||||
hsv.v = 0;
|
||||
point_t point = g_rgb_leds[i].point;
|
||||
for (uint8_t j = start; j < count; j++) {
|
||||
int16_t dx = point.x - g_last_hit_tracker.x[j];
|
||||
int16_t dy = point.y - g_last_hit_tracker.y[j];
|
||||
uint8_t dist = sqrt16(dx * dx + dy * dy);
|
||||
uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) + dist * 5;
|
||||
if (effect > 255)
|
||||
effect = 255;
|
||||
hsv.v = qadd8(hsv.v, 255 - effect);
|
||||
}
|
||||
hsv.v = scale8(hsv.v, rgb_matrix_config.val);
|
||||
RGB rgb = hsv_to_rgb(hsv);
|
||||
rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
|
||||
}
|
||||
return led_max < DRIVER_LED_TOTAL;
|
||||
}
|
||||
|
||||
bool rgb_matrix_solid_reactive_multiwide(effect_params_t* params) {
|
||||
return rgb_matrix_solid_reactive_multiwide_range(0, params);
|
||||
}
|
||||
|
||||
bool rgb_matrix_solid_reactive_wide(effect_params_t* params) {
|
||||
return rgb_matrix_solid_reactive_multiwide_range(qsub8(g_last_hit_tracker.count, 1), params);
|
||||
}
|
||||
|
||||
#endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE)
|
||||
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
||||
@ -0,0 +1,67 @@
|
||||
#ifdef _RGBM_SINGLE_STATIC
|
||||
_RGBM_SINGLE_STATIC( STATIC_LIGHT )
|
||||
#ifdef RGBLIGHT_EFFECT_BREATHING
|
||||
_RGBM_MULTI_DYNAMIC( BREATHING )
|
||||
_RGBM_TMP_DYNAMIC( breathing_3, BREATHING )
|
||||
_RGBM_TMP_DYNAMIC( breathing_4, BREATHING )
|
||||
_RGBM_TMP_DYNAMIC( BREATHING_end, BREATHING )
|
||||
#endif
|
||||
#ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
_RGBM_MULTI_DYNAMIC( RAINBOW_MOOD )
|
||||
_RGBM_TMP_DYNAMIC( rainbow_mood_7, RAINBOW_MOOD )
|
||||
_RGBM_TMP_DYNAMIC( RAINBOW_MOOD_end, RAINBOW_MOOD )
|
||||
#endif
|
||||
#ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
_RGBM_MULTI_DYNAMIC( RAINBOW_SWIRL )
|
||||
_RGBM_TMP_DYNAMIC( rainbow_swirl_10, RAINBOW_SWIRL )
|
||||
_RGBM_TMP_DYNAMIC( rainbow_swirl_11, RAINBOW_SWIRL )
|
||||
_RGBM_TMP_DYNAMIC( rainbow_swirl_12, RAINBOW_SWIRL )
|
||||
_RGBM_TMP_DYNAMIC( rainbow_swirl_13, RAINBOW_SWIRL )
|
||||
_RGBM_TMP_DYNAMIC( RAINBOW_SWIRL_end, RAINBOW_SWIRL )
|
||||
#endif
|
||||
#ifdef RGBLIGHT_EFFECT_SNAKE
|
||||
_RGBM_MULTI_DYNAMIC( SNAKE )
|
||||
_RGBM_TMP_DYNAMIC( snake_16, SNAKE )
|
||||
_RGBM_TMP_DYNAMIC( snake_17, SNAKE )
|
||||
_RGBM_TMP_DYNAMIC( snake_18, SNAKE )
|
||||
_RGBM_TMP_DYNAMIC( snake_19, SNAKE )
|
||||
_RGBM_TMP_DYNAMIC( SNAKE_end, SNAKE )
|
||||
#endif
|
||||
#ifdef RGBLIGHT_EFFECT_KNIGHT
|
||||
_RGBM_MULTI_DYNAMIC( KNIGHT )
|
||||
_RGBM_TMP_DYNAMIC( knight_22, KNIGHT )
|
||||
_RGBM_TMP_DYNAMIC( KNIGHT_end, KNIGHT )
|
||||
#endif
|
||||
#ifdef RGBLIGHT_EFFECT_CHRISTMAS
|
||||
_RGBM_SINGLE_DYNAMIC( CHRISTMAS )
|
||||
#endif
|
||||
#ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
_RGBM_MULTI_STATIC( STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( static_gradient_26, STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( static_gradient_27, STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( static_gradient_28, STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( static_gradient_29, STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( static_gradient_30, STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( static_gradient_31, STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( static_gradient_32, STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( static_gradient_33, STATIC_GRADIENT )
|
||||
_RGBM_TMP_STATIC( STATIC_GRADIENT_end, STATIC_GRADIENT )
|
||||
#endif
|
||||
#ifdef RGBLIGHT_EFFECT_RGB_TEST
|
||||
_RGBM_SINGLE_DYNAMIC( RGB_TEST )
|
||||
#endif
|
||||
#ifdef RGBLIGHT_EFFECT_ALTERNATING
|
||||
_RGBM_SINGLE_DYNAMIC( ALTERNATING )
|
||||
#endif
|
||||
//// Add a new mode here.
|
||||
// #ifdef RGBLIGHT_EFFECT_<name>
|
||||
// _RGBM_<SINGLE|MULTI>_<STATIC|DYNAMIC>( <name> )
|
||||
// #endif
|
||||
#endif
|
||||
|
||||
#undef _RGBM_SINGLE_STATIC
|
||||
#undef _RGBM_SINGLE_DYNAMIC
|
||||
#undef _RGBM_MULTI_STATIC
|
||||
#undef _RGBM_MULTI_DYNAMIC
|
||||
#undef _RGBM_TMP_STATIC
|
||||
#undef _RGBM_TMP_DYNAMIC
|
||||
@ -0,0 +1,5 @@
|
||||
#if defined(RGBLED_SPLIT) && !defined(RGBLIGHT_SPLIT)
|
||||
// When RGBLED_SPLIT is defined,
|
||||
// it is considered that RGBLIGHT_SPLIT is defined implicitly.
|
||||
#define RGBLIGHT_SPLIT
|
||||
#endif
|
||||
@ -0,0 +1,15 @@
|
||||
#if defined(USE_I2C) || defined(EH)
|
||||
// When using I2C, using rgblight implicitly involves split support.
|
||||
#if defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_SPLIT)
|
||||
#define RGBLIGHT_SPLIT
|
||||
#endif
|
||||
|
||||
#else // use serial
|
||||
// When using serial, the user must define RGBLIGHT_SPLIT explicitly
|
||||
// in config.h as needed.
|
||||
// see quantum/rgblight_post_config.h
|
||||
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
|
||||
// When using serial and RGBLIGHT_SPLIT need separate transaction
|
||||
#define SERIAL_USE_MULTI_TRANSACTION
|
||||
#endif
|
||||
#endif
|
||||
Loading…
Reference in new issue