From be2c7aac31c956caacaba44531463c8083f5199e Mon Sep 17 00:00:00 2001 From: xyxjj Date: Wed, 31 May 2017 14:34:28 +0800 Subject: [PATCH] Add files via upload --- keyboards/DeltaSplit75/DeltaSplit75.c | 1 + keyboards/DeltaSplit75/DeltaSplit75.h | 13 + keyboards/DeltaSplit75/Makefile | 5 + keyboards/DeltaSplit75/ProtoSplit/Makefile | 3 + .../DeltaSplit75/ProtoSplit/ProtoSplit.c | 32 ++ .../DeltaSplit75/ProtoSplit/ProtoSplit.h | 37 ++ keyboards/DeltaSplit75/ProtoSplit/config.h | 90 +++++ keyboards/DeltaSplit75/ProtoSplit/rules.mk | 5 + keyboards/DeltaSplit75/V2/Makefile | 3 + keyboards/DeltaSplit75/V2/V2.c | 32 ++ keyboards/DeltaSplit75/V2/V2.h | 37 ++ keyboards/DeltaSplit75/V2/config.h | 90 +++++ keyboards/DeltaSplit75/V2/rules.mk | 5 + keyboards/DeltaSplit75/config.h | 29 ++ keyboards/DeltaSplit75/eeprom-lefthand.eep | 2 + keyboards/DeltaSplit75/eeprom-righthand.eep | 2 + keyboards/DeltaSplit75/i2c.c | 162 ++++++++ keyboards/DeltaSplit75/i2c.h | 31 ++ .../DeltaSplit75/keymaps/Default/config.h | 31 ++ .../DeltaSplit75/keymaps/Default/keymap.c | 30 ++ keyboards/DeltaSplit75/matrix.c | 318 +++++++++++++++ keyboards/DeltaSplit75/pro_micro.h | 362 ++++++++++++++++++ keyboards/DeltaSplit75/readme.md | 119 ++++++ keyboards/DeltaSplit75/rules.mk | 87 +++++ keyboards/DeltaSplit75/serial.c | 228 +++++++++++ keyboards/DeltaSplit75/serial.h | 26 ++ keyboards/DeltaSplit75/split_util.c | 81 ++++ keyboards/DeltaSplit75/split_util.h | 22 ++ 28 files changed, 1883 insertions(+) create mode 100644 keyboards/DeltaSplit75/DeltaSplit75.c create mode 100644 keyboards/DeltaSplit75/DeltaSplit75.h create mode 100644 keyboards/DeltaSplit75/Makefile create mode 100644 keyboards/DeltaSplit75/ProtoSplit/Makefile create mode 100644 keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.c create mode 100644 keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.h create mode 100644 keyboards/DeltaSplit75/ProtoSplit/config.h create mode 100644 keyboards/DeltaSplit75/ProtoSplit/rules.mk create mode 100644 keyboards/DeltaSplit75/V2/Makefile create mode 100644 keyboards/DeltaSplit75/V2/V2.c create mode 100644 keyboards/DeltaSplit75/V2/V2.h create mode 100644 keyboards/DeltaSplit75/V2/config.h create mode 100644 keyboards/DeltaSplit75/V2/rules.mk create mode 100644 keyboards/DeltaSplit75/config.h create mode 100644 keyboards/DeltaSplit75/eeprom-lefthand.eep create mode 100644 keyboards/DeltaSplit75/eeprom-righthand.eep create mode 100644 keyboards/DeltaSplit75/i2c.c create mode 100644 keyboards/DeltaSplit75/i2c.h create mode 100644 keyboards/DeltaSplit75/keymaps/Default/config.h create mode 100644 keyboards/DeltaSplit75/keymaps/Default/keymap.c create mode 100644 keyboards/DeltaSplit75/matrix.c create mode 100644 keyboards/DeltaSplit75/pro_micro.h create mode 100644 keyboards/DeltaSplit75/readme.md create mode 100644 keyboards/DeltaSplit75/rules.mk create mode 100644 keyboards/DeltaSplit75/serial.c create mode 100644 keyboards/DeltaSplit75/serial.h create mode 100644 keyboards/DeltaSplit75/split_util.c create mode 100644 keyboards/DeltaSplit75/split_util.h diff --git a/keyboards/DeltaSplit75/DeltaSplit75.c b/keyboards/DeltaSplit75/DeltaSplit75.c new file mode 100644 index 0000000000..b3d162ba9d --- /dev/null +++ b/keyboards/DeltaSplit75/DeltaSplit75.c @@ -0,0 +1 @@ +#include "DeltaSplit75.h" \ No newline at end of file diff --git a/keyboards/DeltaSplit75/DeltaSplit75.h b/keyboards/DeltaSplit75/DeltaSplit75.h new file mode 100644 index 0000000000..8931f73a5e --- /dev/null +++ b/keyboards/DeltaSplit75/DeltaSplit75.h @@ -0,0 +1,13 @@ +#ifndef DeltaSplit75_H +#define DeltaSplit75_H + +#ifdef SUBPROJECT_V2 + #include "V2.h" +#endif +#ifdef SUBPROJECT_ProtoSplit + #include "ProtoSplit.h" +#endif + +#include "quantum.h" + +#endif \ No newline at end of file diff --git a/keyboards/DeltaSplit75/Makefile b/keyboards/DeltaSplit75/Makefile new file mode 100644 index 0000000000..9b7c3a6024 --- /dev/null +++ b/keyboards/DeltaSplit75/Makefile @@ -0,0 +1,5 @@ +SUBPROJECT_DEFAULT = RightB + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/DeltaSplit75/ProtoSplit/Makefile b/keyboards/DeltaSplit75/ProtoSplit/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/DeltaSplit75/ProtoSplit/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.c b/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.c new file mode 100644 index 0000000000..1199257d04 --- /dev/null +++ b/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.c @@ -0,0 +1,32 @@ +#include "DeltaSplit75.h" + +#ifdef AUDIO_ENABLE + float tone_startup[][2] = SONG(STARTUP_SOUND); + float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void matrix_init_kb(void) { + + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + +void shutdown_user(void) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); + #endif +} diff --git a/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.h b/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.h new file mode 100644 index 0000000000..20aa5cbe85 --- /dev/null +++ b/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.h @@ -0,0 +1,37 @@ +#ifndef ProtoSplit_H +#define ProtoSplit_H + +#include "../DeltaSplit75.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); +//matrix is defined in a weird way here; the layout on both sides are asymmetrical, but the "matrix" is symmetrical but with empty gaps +//the last column is defined as a separate row because the firmware currently doesnt support more than 8 columns (this layout has 9 columns per side) K45 and K110 are the Bs on both sides +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K70, K71, K72, K73, K74, K75, K76, K77, K132, \ + K10, K11, K12, K13, K14, K15, K16, K80, K81, K82, K83, K84, K85, K86, K87, K133, \ + K20, K21, K22, K23, K24, K25, K90, K91, K92, K93, K94, K95, K96, K97, K134, \ + K30, K31, K32, K33, K34, K35, K100, K101, K102, K103, K104, K105, K107, K135, \ + K40, K41, K42, K43, K44, K45, K110, K111, K112, K113, K114, K115, K116, K117, K136, \ + K50, K51, K52, K54, K55, K120, K121, K122, K123, K126, K127, K137 \ + ) \ + { \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO}, \ + { K10, K11, K12, K13, K14, K15, K16, KC_NO}, \ + { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO}, \ + { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO}, \ + { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO}, \ + { K50, K51, K52, KC_NO, K54, K55, KC_NO, KC_NO}, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \ + { K70 , K71, K72, K73, K74, K75, K76, K77}, \ + { K80, K81, K82, K83, K84, K85, K86, K87}, \ + { K90, K91, K92, K93, K94, K95, K96, K97}, \ + { K100, K101, K102, K103, K104, K105, KC_NO, K107}, \ + { K110, K111, K112, K113, K114, K115, K116, K117}, \ + { K120, K121, K122, K123, KC_NO, KC_NO, K126, K127}, \ + { KC_NO, KC_NO, K132, K133, K134, K135, K136, K137} \ + } + +#endif \ No newline at end of file diff --git a/keyboards/DeltaSplit75/ProtoSplit/config.h b/keyboards/DeltaSplit75/ProtoSplit/config.h new file mode 100644 index 0000000000..0f4b806e2d --- /dev/null +++ b/keyboards/DeltaSplit75/ProtoSplit/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER xyxjj +#define PRODUCT DeltaSplit75 +#define DESCRIPTION 75% split keyboard + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 14 +#define MATRIX_COLS 8 + +// wiring of each half +#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 } +#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1} + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif \ No newline at end of file diff --git a/keyboards/DeltaSplit75/ProtoSplit/rules.mk b/keyboards/DeltaSplit75/ProtoSplit/rules.mk new file mode 100644 index 0000000000..80a942d06f --- /dev/null +++ b/keyboards/DeltaSplit75/ProtoSplit/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/DeltaSplit75/V2/Makefile b/keyboards/DeltaSplit75/V2/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/DeltaSplit75/V2/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/DeltaSplit75/V2/V2.c b/keyboards/DeltaSplit75/V2/V2.c new file mode 100644 index 0000000000..1199257d04 --- /dev/null +++ b/keyboards/DeltaSplit75/V2/V2.c @@ -0,0 +1,32 @@ +#include "DeltaSplit75.h" + +#ifdef AUDIO_ENABLE + float tone_startup[][2] = SONG(STARTUP_SOUND); + float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void matrix_init_kb(void) { + + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + +void shutdown_user(void) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); + #endif +} diff --git a/keyboards/DeltaSplit75/V2/V2.h b/keyboards/DeltaSplit75/V2/V2.h new file mode 100644 index 0000000000..84503e6b4c --- /dev/null +++ b/keyboards/DeltaSplit75/V2/V2.h @@ -0,0 +1,37 @@ +#ifndef V2_H +#define V2_H + +#include "../DeltaSplit75.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); +//matrix is defined in a weird way here; the layout on both sides are asymmetrical, but the "matrix" is symmetrical but with empty gaps +//the last column is defined as a separate row because the firmware currently doesnt support more than 8 columns (this layout has 9 columns per side) K45 and K110 are the Bs on both sides; K53 and K106 are extra keys for ISO +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K70, K71, K72, K73, K74, K75, K76, K77, K132, \ + K10, K11, K12, K13, K14, K15, K16, K80, K81, K82, K83, K84, K85, K86, K87, K133, \ + K20, K21, K22, K23, K24, K25, K90, K91, K92, K93, K94, K95, K96, K97, K134, \ + K30, K31, K32, K33, K34, K35, K100, K101, K102, K103, K104, K105, K106, K107, K135, \ + K40, K53, K41, K42, K43, K44, K45, K110, K111, K112, K113, K114, K115, K116, K117, K136, \ + K50, K51, K52, K54, K55, K120, K121, K122, K123, K126, K127, K137 \ + ) \ + { \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO}, \ + { K10, K11, K12, K13, K14, K15, K16, KC_NO}, \ + { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO}, \ + { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO}, \ + { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO}, \ + { K50, K51, K52, K53, K54, K55, KC_NO, KC_NO}, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \ + { K70 , K71, K72, K73, K74, K75, K76, K77}, \ + { K80, K81, K82, K83, K84, K85, K86, K87}, \ + { K90, K91, K92, K93, K94, K95, K96, K97}, \ + { K100, K101, K102, K103, K104, K105, K106, K107}, \ + { K110, K111, K112, K113, K114, K115, K116, K117}, \ + { K120, K121, K122, K123, KC_NO, KC_NO, K126, K127}, \ + { KC_NO, KC_NO, K132, K133, K134, K135, K136, K137} \ + } + +#endif \ No newline at end of file diff --git a/keyboards/DeltaSplit75/V2/config.h b/keyboards/DeltaSplit75/V2/config.h new file mode 100644 index 0000000000..0f4b806e2d --- /dev/null +++ b/keyboards/DeltaSplit75/V2/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER xyxjj +#define PRODUCT DeltaSplit75 +#define DESCRIPTION 75% split keyboard + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 14 +#define MATRIX_COLS 8 + +// wiring of each half +#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 } +#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1} + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif \ No newline at end of file diff --git a/keyboards/DeltaSplit75/V2/rules.mk b/keyboards/DeltaSplit75/V2/rules.mk new file mode 100644 index 0000000000..80a942d06f --- /dev/null +++ b/keyboards/DeltaSplit75/V2/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/DeltaSplit75/config.h b/keyboards/DeltaSplit75/config.h new file mode 100644 index 0000000000..ea0498c504 --- /dev/null +++ b/keyboards/DeltaSplit75/config.h @@ -0,0 +1,29 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#ifdef SUBPROJECT_RightB + #include "RightB/config.h" +#endif +#ifdef SUBPROJECT_V2 + #include "V2/config.h" +#endif +#endif diff --git a/keyboards/DeltaSplit75/eeprom-lefthand.eep b/keyboards/DeltaSplit75/eeprom-lefthand.eep new file mode 100644 index 0000000000..b9666a74c0 --- /dev/null +++ b/keyboards/DeltaSplit75/eeprom-lefthand.eep @@ -0,0 +1,2 @@ +:0B0000000000000000000000000001F4 +:00000001FF diff --git a/keyboards/DeltaSplit75/eeprom-righthand.eep b/keyboards/DeltaSplit75/eeprom-righthand.eep new file mode 100644 index 0000000000..94cc5be7fc --- /dev/null +++ b/keyboards/DeltaSplit75/eeprom-righthand.eep @@ -0,0 +1,2 @@ +:0B0000000000000000000000000000F5 +:00000001FF diff --git a/keyboards/DeltaSplit75/i2c.c b/keyboards/DeltaSplit75/i2c.c new file mode 100644 index 0000000000..084c890c40 --- /dev/null +++ b/keyboards/DeltaSplit75/i2c.c @@ -0,0 +1,162 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 100000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + +#endif diff --git a/keyboards/DeltaSplit75/keymaps/Default/config.h b/keyboards/DeltaSplit75/keymaps/Default/config.h new file mode 100644 index 0000000000..12a1402d98 --- /dev/null +++ b/keyboards/DeltaSplit75/keymaps/Default/config.h @@ -0,0 +1,31 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + + +#ifdef SUBPROJECT_V2 + #include "../../V2/config.h" +#endif +#ifdef SUBPROJECT_ProtoSplit + #include "../../ProtoSplit/config.h" +#endif diff --git a/keyboards/DeltaSplit75/keymaps/Default/keymap.c b/keyboards/DeltaSplit75/keymaps/Default/keymap.c new file mode 100644 index 0000000000..563bcca586 --- /dev/null +++ b/keyboards/DeltaSplit75/keymaps/Default/keymap.c @@ -0,0 +1,30 @@ +#include "DeltaSplit75.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Fillers to make layering more clear + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_END, KC_PGDN, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_SLCK, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_TRNS, KC_ENT, KC_PAUS, //modify KC_TRNS to enable ISO Support + KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PSCR, //modify KC_TRNS to enable ISO Support + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, + KC_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLU, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + M(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_VOLD, M(0), KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; \ No newline at end of file diff --git a/keyboards/DeltaSplit75/matrix.c b/keyboards/DeltaSplit75/matrix.c new file mode 100644 index 0000000000..1389690042 --- /dev/null +++ b/keyboards/DeltaSplit75/matrix.c @@ -0,0 +1,318 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + int ret = _matrix_scan(); + + + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + + matrix_scan_quantum(); + + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + +#ifdef USE_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/DeltaSplit75/pro_micro.h b/keyboards/DeltaSplit75/pro_micro.h new file mode 100644 index 0000000000..f9e7ed75d9 --- /dev/null +++ b/keyboards/DeltaSplit75/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/DeltaSplit75/readme.md b/keyboards/DeltaSplit75/readme.md new file mode 100644 index 0000000000..b8c5fa1fdb --- /dev/null +++ b/keyboards/DeltaSplit75/readme.md @@ -0,0 +1,119 @@ +DeltaSplit75 +====== + +This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split +Credit to ahtn and wootpatoot for work on the split keyboard firmware + +Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 +based boards. + + +## First Time Setup + +Download or clone the whole firmware and navigate to the keyboards/DeltaSplit75 directory. Once your dev env is setup, you'll be able to generate the default .hex using: + +``` +$ make V2 +or +$ make ProtoSplit (if you have one of the prototype PCBs) +``` + +You will see a lot of output and if everything worked correctly you will see the built hex files: + +``` +DeltaSplit75_ProtoSplit_Default +or +DeltaSplit75_V2_Default.hex +``` + + +``` + +For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. + +### DeltaSplit75 V2 +The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code $make ProtoSplit instead + +Features +-------- + +For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). + +Some features supported by the firmware: + +* Either half can connect to the computer via USB, or both halves can be used + independently. +* 75% formfactor +* Support for multiple Bottom Rows +* RGB underglow support +* Split Backspace and ISO support + + + Flashing +------- +I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too + + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + +Notes on Using Pro Micro 3.3V +----------------------------- + +Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects +the frequency on the 3.3V board. + +Also, if the slave board is producing weird characters in certain columns, +update the following line in `matrix.c` to the following: + +``` +// _delay_us(30); // without this wait read unstable value. +_delay_us(300); // without this wait read unstable value. +``` diff --git a/keyboards/DeltaSplit75/rules.mk b/keyboards/DeltaSplit75/rules.mk new file mode 100644 index 0000000000..0efa785505 --- /dev/null +++ b/keyboards/DeltaSplit75/rules.mk @@ -0,0 +1,87 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 ?= yes +USE_I2C ?= yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/DeltaSplit75/serial.c b/keyboards/DeltaSplit75/serial.c new file mode 100644 index 0000000000..6faed09ce0 --- /dev/null +++ b/keyboards/DeltaSplit75/serial.c @@ -0,0 +1,228 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include "serial.h" + +#ifdef USE_SERIAL + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < 8; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(data & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += serial_master_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += serial_slave_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + uint8_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} + +#endif diff --git a/keyboards/DeltaSplit75/serial.h b/keyboards/DeltaSplit75/serial.h new file mode 100644 index 0000000000..6ef52019a8 --- /dev/null +++ b/keyboards/DeltaSplit75/serial.h @@ -0,0 +1,26 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH ((MATRIX_COLS+7)/8 *MATRIX_ROWS/2) +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/DeltaSplit75/split_util.c b/keyboards/DeltaSplit75/split_util.c new file mode 100644 index 0000000000..226dc18816 --- /dev/null +++ b/keyboards/DeltaSplit75/split_util.c @@ -0,0 +1,81 @@ +#include +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else +# include "serial.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated use MASTER_RIGHT instead since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< + +#ifdef EE_HANDS + #define EECONFIG_BOOTMAGIC_END (uint8_t *)10 + #define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END +#endif + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +#endif