forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix to V2 Protocol for Fuse/Sig/Lock byte read -- off by one error on the array when writing back the response from the device.

Browse Source 
FLASH/EEPROM reading and writing currently broken and unfinished, respectively.
pull/1469/head
Dean Camera 16 years ago
parent dbb5f249bd
commit bff4dbe189
8 changed files with 57 additions and 21 deletions
Show Stats Download Patch File Download Diff File

7
Projects/Incomplete/AVRISP/AVRISP.c
Unescape View File

@ -34,6 +34,10 @@
* the project and is responsible for the initial application hardware configuration.
*/
// TODO: Add reversed target connector checks
// TODO: Add in software SPI for lower programming speeds below 125KHz
// TODO: Add in VTARGET detection
#include "AVRISP.h"
/** Main program entry point. This routine contains the overall program flow, including initial
@ -44,8 +48,6 @@ int main(void)
SetupHardware();
V2Params_LoadEEPROMParamValues();
printf("AVRISP-MKII Clone\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
@ -68,7 +70,6 @@ void SetupHardware(void)
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}

1
Projects/Incomplete/AVRISP/AVRISP.h
Unescape View File

@ -46,7 +46,6 @@
#include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Peripheral/SPI.h>
#include <LUFA/Drivers/USB/USB.h>

10
Projects/Incomplete/AVRISP/AVRISP.txt
Unescape View File

@ -50,11 +50,19 @@
* \section SSec_Description Project Description:
*
* Firmware for an AVRStudio compatible AVRISP-MKII clone programmer. This project will enable the USB AVR series of
* microcontrollers to act as a clone of the official Atmel AVRISP-MKII programmer, usable within AVRStudio.
* microcontrollers to act as a clone of the official Atmel AVRISP-MKII programmer, usable within AVRStudio. In its
* most basic form, it allows for the programming of 5V AVRs from within AVRStudio with no special hardware other than
* the USB AVR and the parts needed for the USB interface. If the user desires, more advanced circuits incorporating
* level conversion can be made to allow for the programming of 3.3V AVR designs.
*
* This device spoofs Atmel's official AVRISP-MKII device PID so that it remains compatible with Atmel's AVRISP-MKII
* drivers. When promted, direct your OS to install Atmel's AVRISP-MKII drivers provided with AVRStudio.
*
* Note that this design currently has several limitations:
* - Minimum target clock speed of 500KHz due to hardware SPI used
* - No VTARGET detection and notification
* - No reversed/shorted target connector detection and notification
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

38
Projects/Incomplete/AVRISP/Lib/V2Protocol.c
Unescape View File

@ -264,9 +264,36 @@ static void V2Protocol_Command_ProgramMemory(uint8_t V2Command)
Endpoint_Read_Stream_LE(&Write_Memory_Params, sizeof(Write_Memory_Params));
Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);
for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++)
if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK)
{
// TODO - Read in programming data, write to device
for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++)
{
if ((V2Command == CMD_READ_FLASH_ISP) && (CurrentByte & 0x01))
Write_Memory_Params.ProgrammingCommands[0] ^= READ_WRITE_ODD_BYTE_MASK;
SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
SPI_SendByte(CurrentAddress >> 8);
SPI_SendByte(CurrentAddress & 0xFF);
SPI_SendByte(Endpoint_Read_Byte());
// TODO - Correct Polling
if (((V2Command == CMD_PROGRAM_FLASH_ISP) && (CurrentByte & 0x01)) || (V2Command == CMD_PROGRAM_EEPROM_ISP))
CurrentAddress++;
}
/* If the current page must be committed, send the PROGRAM PAGE command to the target */
if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK)
{
SPI_SendByte(Write_Memory_Params.ProgrammingCommands[1]);
SPI_SendByte(CurrentAddress >> 8);
SPI_SendByte(CurrentAddress & 0xFF);
SPI_SendByte(0x00);
}
}
else
{
// TODO - Read in programming data, write to device
}
Endpoint_ClearOUT();
@ -294,7 +321,7 @@ static void V2Protocol_Command_ReadMemory(uint8_t V2Command)
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++)
{
if ((V2Command == CMD_READ_FLASH_ISP) && (CurrentByte & 0x01))
@ -312,7 +339,8 @@ static void V2Protocol_Command_ReadMemory(uint8_t V2Command)
Endpoint_WaitUntilReady();
}
CurrentAddress++;
if (((V2Command == CMD_READ_FLASH_ISP) && (CurrentByte & 0x01)) || (V2Command == CMD_READ_EEPROM_ISP))
CurrentAddress++;
}
Endpoint_Write_Byte(STATUS_CMD_OK);
@ -377,7 +405,7 @@ static void V2Protocol_Command_ReadFuseLockSigOSCCAL(uint8_t V2Command)
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte]);
Endpoint_Write_Byte(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte - 1]);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}

7
Projects/Incomplete/AVRISP/Lib/V2Protocol.h
Unescape View File

@ -45,10 +45,11 @@
#include "V2ProtocolTarget.h"
/* Macros: */
#define PROGRAMMER_ID "AVRISP_MK2"
#define PROGRAMMER_ID "AVRISP_MK2"
#define READ_WRITE_ODD_BYTE_MASK (1 << 3)
#define TARGET_MODE_PAGE_MASK (1 << 0)
#define READ_WRITE_ODD_BYTE_MASK (1 << 3)
#define PROG_MODE_PAGED_WRITES_MASK (1 << 0)
#define PROG_MODE_COMMIT_PAGE_MASK (1 << 7)
/* Function Prototypes: */
void V2Protocol_ProcessCommand(void);

8
Projects/Incomplete/AVRISP/Lib/V2ProtocolParams.c
Unescape View File

@ -37,7 +37,7 @@
#include "V2ProtocolParams.h"
/* Non-Volatile Parameter Values for EEPROM storage */
uint8_t EEMEM EEPROM_Rest_Polarity;
uint8_t EEMEM EEPROM_Rest_Polarity = 0x00;
/* Volatile Parameter Values for RAM storage */
static ParameterItem_t ParameterTable[] =
@ -67,11 +67,11 @@ static ParameterItem_t ParameterTable[] =
.ParamPrivellages = PARAM_PRIV_READ },
{ .ParamID = PARAM_SCK_DURATION,
.ParamValue = 0xFF,
.ParamValue = 0x06,
.ParamPrivellages = PARAM_PRIV_READ | PARAM_PRIV_WRITE },
{ .ParamID = PARAM_RESET_POLARITY,
.ParamValue = 0x01,
.ParamValue = 0x00,
.ParamPrivellages = PARAM_PRIV_WRITE },
{ .ParamID = PARAM_STATUS_TGT_CONN,
@ -133,5 +133,5 @@ void V2Params_SetParameterValue(uint8_t ParamID, uint8_t Value)
/* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
if (ParamID == PARAM_RESET_POLARITY)
eeprom_write_byte(&EEPROM_Rest_Polarity, Value);
eeprom_write_byte(&EEPROM_Rest_Polarity, Value);
}

6
Projects/Incomplete/AVRISP/Lib/V2ProtocolTarget.c
Unescape View File

@ -71,7 +71,7 @@ void V2Protocol_ChangeTargetResetLine(bool ResetTarget)
}
else
{
RESET_LINE_PORT &= ~RESET_LINE_MASK;
RESET_LINE_PORT &= ~RESET_LINE_MASK;
RESET_LINE_DDR &= ~RESET_LINE_MASK;
}
}
@ -89,13 +89,13 @@ uint8_t V2Protocol_WaitWhileTargetBusy(void)
do
{
V2Protocol_DelayMS(1);
SPI_SendByte(0xF0);
SPI_SendByte(0x00);
SPI_SendByte(0x00);
ResponseByte = SPI_ReceiveByte();
V2Protocol_DelayMS(1);
}
while ((ResponseByte & 0x01) && (TimeoutMS--));

1
Projects/Incomplete/AVRISP/makefile
Unescape View File

@ -138,7 +138,6 @@ SRC = $(TARGET).c \
Lib/V2Protocol.c \
Lib/V2ProtocolParams.c \
Lib/V2ProtocolTarget.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \

Write Preview
Loading…
Cancel
Save