From c483920d7727a9ab36b212ac7c9ca6e32ac285d6 Mon Sep 17 00:00:00 2001 From: matth Date: Wed, 23 Oct 2019 13:24:39 -0600 Subject: [PATCH] updated finished xd87 setup --- keyboards/xd87/config.h | 35 ++++++------------------- keyboards/xd87/keymaps/matt/config.h | 19 -------------- keyboards/xd87/keymaps/matt/keymap.c | 14 +--------- keyboards/xd87/keymaps/matt/layers.json | 1 + keyboards/xd87/keymaps/matt/readme.md | 14 +++++++++- keyboards/xd87/rules.mk | 6 ++--- 6 files changed, 26 insertions(+), 63 deletions(-) delete mode 100644 keyboards/xd87/keymaps/matt/config.h create mode 100644 keyboards/xd87/keymaps/matt/layers.json diff --git a/keyboards/xd87/config.h b/keyboards/xd87/config.h index b0d07f0344..04a451dbb4 100644 --- a/keyboards/xd87/config.h +++ b/keyboards/xd87/config.h @@ -50,36 +50,16 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -//Default, full functionality, has flickering #define BACKLIGHT_PIN D0 #define BACKLIGHT_LEVELS 5 -#define BACKLIGHT_BREATHING -/* -//No defined pin, no wired mod or flickering, but zero functionality. LEDs are just on full force and can't change levels or toggle on/off -//#define BACKLIGHT_PIN D0 -*/ - - -/* -//With the wire mod, allows the board to use pin B7. No flickering! However, all backlight levels are the same, so only can toggle lights on and off -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_LEVELS 1 -*/ +//Defining these pins forces the keyboard to use software_pwm. This has no flickering and full functionality. Backlight breathing is disabled as that requires hardware pwm. +#define B5_AUDIO +#define C6_AUDIO +#define BACKLIGHT_ON_STATE 1 /* -//Experimental. With the wire mod, I was hoping I could get the no flickering of B7 and functionality of D0. Doesn't work, still flickers -#define BACKLIGHT_LED_COUNT 2 -#undef BACKLIGHT_PIN -#define BACKLIGHT_PINS { B7, D0 } -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 5 -*/ - - -/* -//With the default setting the RGB underglow works perfectly. However, can't see them at all in the case, so I just don't use them. #define RGB_DI_PIN B7 #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS @@ -89,8 +69,9 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 8 #endif */ + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 +#define DEBOUNCE 0 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -98,9 +79,9 @@ along with this program. If not, see . /* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE +//#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE +//#define LOCKING_RESYNC_ENABLE /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. * This is userful for the Windows task manager shortcut (ctrl+shift+esc). diff --git a/keyboards/xd87/keymaps/matt/config.h b/keyboards/xd87/keymaps/matt/config.h deleted file mode 100644 index ed56340c39..0000000000 --- a/keyboards/xd87/keymaps/matt/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 Alexander Fougner - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/xd87/keymaps/matt/keymap.c b/keyboards/xd87/keymaps/matt/keymap.c index 32916b5c04..cfd6cec0fd 100644 --- a/keyboards/xd87/keymaps/matt/keymap.c +++ b/keyboards/xd87/keymaps/matt/keymap.c @@ -2,17 +2,5 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_tkl_ansi(KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - [1] = LAYOUT_tkl_ansi(KC_SLEP, BL_STEP, BL_BRTG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) + [1] = LAYOUT_tkl_ansi(KC_SLEP, BL_INC, BL_DEC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) }; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/xd87/keymaps/matt/layers.json b/keyboards/xd87/keymaps/matt/layers.json new file mode 100644 index 0000000000..ce27ca0526 --- /dev/null +++ b/keyboards/xd87/keymaps/matt/layers.json @@ -0,0 +1 @@ +[["KC_ESC", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_F11", "KC_F12", "KC_PSCR", "KC_SLCK", "KC_PAUS", "KC_GRV", "KC_1", "KC_2", "KC_3", "KC_4", "KC_5", "KC_6", "KC_7", "KC_8", "KC_9", "KC_0", "KC_MINS", "KC_EQL", "KC_BSPC", "KC_INS", "KC_HOME", "KC_PGUP", "KC_TAB", "KC_Q", "KC_W", "KC_E", "KC_R", "KC_T", "KC_Y", "KC_U", "KC_I", "KC_O", "KC_P", "KC_LBRC", "KC_RBRC", "KC_BSLS", "KC_DEL", "KC_END", "KC_PGDN", "KC_CAPS", "KC_A", "KC_S", "KC_D", "KC_F", "KC_G", "KC_H", "KC_J", "KC_K", "KC_L", "KC_SCLN", "KC_QUOT", "KC_ENT", "KC_LSFT", "KC_Z", "KC_X", "KC_C", "KC_V", "KC_B", "KC_N", "KC_M", "KC_COMM", "KC_DOT", "KC_SLSH", "KC_RSFT", "KC_UP", "KC_LCTL", "KC_LGUI", "KC_LALT", "KC_SPC", "KC_RALT", "MO(1)", "KC_APP", "KC_RCTL", "KC_LEFT", "KC_DOWN", "KC_RGHT"], ["KC_NO", "BL_TOGG", "BL_DEC", "BL_INC", "BL_BRTG", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_TRNS", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO"]] \ No newline at end of file diff --git a/keyboards/xd87/keymaps/matt/readme.md b/keyboards/xd87/keymaps/matt/readme.md index 41baff9435..fd07b155fb 100644 --- a/keyboards/xd87/keymaps/matt/readme.md +++ b/keyboards/xd87/keymaps/matt/readme.md @@ -1 +1,13 @@ -# The default keymap for xd87 \ No newline at end of file +# Generated Keymap Layout + +This layout was generated by the QMK API. You can find the JSON data used to +generate this keymap in the file layers.json. + +To make use of this file you will need follow the following steps: + +* Download or Clone QMK Firmware: +* Extract QMK Firmware to a location on your hard drive +* Copy this folder into %s +* You are now ready to compile or use your keymap with the source + +More information can be found in the QMK docs: \ No newline at end of file diff --git a/keyboards/xd87/rules.mk b/keyboards/xd87/rules.mk index 1b1b6fdf28..1a489036b5 100644 --- a/keyboards/xd87/rules.mk +++ b/keyboards/xd87/rules.mk @@ -61,11 +61,11 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work