forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode.

Browse Source
pull/1469/head
Dean Camera 14 years ago
parent a9f313afa9
commit cbc00c843a
8 changed files with 88 additions and 61 deletions
Show Stats Download Patch File Download Diff File

1
LUFA/ManPages/ChangeLog.txt
Unescape View File

@ -102,6 +102,7 @@
* - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
* - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
* - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
* - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode
*
* \section Sec_ChangeLog100807 Version 100807
* <b>New:</b>

34
Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
Unescape View File

@ -119,6 +119,40 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
}
}
/** Enables the physical TPI interface on the target and enables access to the internal NVM controller.
*
* \return Boolean true if the TPI interface was enabled successfully, false otherwise
*/
bool TINYNVM_EnableTPI(void)
{
/* Enable TPI programming mode with the attached target */
XPROGTarget_EnableTargetTPI();
/* Lower direction change guard time to 0 USART bits */
XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
XPROGTarget_SendByte(0x07);
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
XPROGTarget_SendByte(TPI_CMD_SKEY);
for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
/* Wait until the NVM bus becomes active */
return TINYNVM_WaitWhileNVMBusBusy();
}
/** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */
void TINYNVM_DisableTPI(void)
{
TINYNVM_WaitWhileNVMBusBusy();
/* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */
XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_STATUS_REG);
XPROGTarget_SendByte(0x00);
XPROGTarget_DisableTargetTPI();
}
/** Reads memory from the target's memory spaces.
*
* \param[in] ReadAddress Start address to read from within the target's address space

2
Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
Unescape View File

@ -64,6 +64,8 @@
/* Function Prototypes: */
bool TINYNVM_WaitWhileNVMBusBusy(void);
bool TINYNVM_WaitWhileNVMControllerBusy(void);
bool TINYNVM_EnableTPI(void);
void TINYNVM_DisableTPI(void);
bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
uint8_t* ReadBuffer,
uint16_t ReadLength);

43
Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
Unescape View File

@ -105,6 +105,7 @@ bool XMEGANVM_WaitWhileNVMControllerBusy(void)
{
/* Fetch the current status value via the pointer register (without auto-increment afterwards) */
XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT << 2) | PDI_DATSIZE_1BYTE);
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
@ -117,6 +118,48 @@ bool XMEGANVM_WaitWhileNVMControllerBusy(void)
}
}
/** Enables the physical PDI interface on the target and enables access to the internal NVM controller.
*
* \return Boolean true if the PDI interface was enabled successfully, false otherwise
*/
bool XMEGANVM_EnablePDI(void)
{
/* Enable PDI programming mode with the attached target */
XPROGTarget_EnableTargetPDI();
/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(PDI_RESET_KEY);
/* Lower direction change guard time to 0 USART bits */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);
XPROGTarget_SendByte(0x07);
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
XPROGTarget_SendByte(PDI_CMD_KEY);
for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
/* Wait until the NVM bus becomes active */
return XMEGANVM_WaitWhileNVMBusBusy();
}
/** Removes access to the target's NVM controller and physically disables the target's physical PDI interface. */
void XMEGANVM_DisablePDI(void)
{
XMEGANVM_WaitWhileNVMBusBusy();
/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(0x00);
/* Do it twice to make sure it takes effect (silicon bug?) */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(0x00);
XPROGTarget_DisableTargetPDI();
}
/** Retrieves the CRC value of the given memory space.
*
* \param[in] CRCCommand NVM CRC command to issue to the target

2
Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
Unescape View File

@ -108,6 +108,8 @@
/* Function Prototypes: */
bool XMEGANVM_WaitWhileNVMBusBusy(void);
bool XMEGANVM_WaitWhileNVMControllerBusy(void);
bool XMEGANVM_EnablePDI(void);
void XMEGANVM_DisablePDI(void);
bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest);
bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize);
bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t Byte);

62
Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
Unescape View File

@ -118,43 +118,9 @@ static void XPROGProtocol_EnterXPROGMode(void)
bool NVMBusEnabled = false;
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
{
/* Enable PDI programming mode with the attached target */
XPROGTarget_EnableTargetPDI();
/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(PDI_RESET_KEY);
/* Lower direction change guard time to 0 USART bits */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);
XPROGTarget_SendByte(0x07);
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
XPROGTarget_SendByte(PDI_CMD_KEY);
for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
/* Wait until the NVM bus becomes active */
NVMBusEnabled = XMEGANVM_WaitWhileNVMBusBusy();
}
NVMBusEnabled = XMEGANVM_EnablePDI();
else if (XPROG_SelectedProtocol == XPRG_PROTOCOL_TPI)
{
/* Enable TPI programming mode with the attached target */
XPROGTarget_EnableTargetTPI();
/* Lower direction change guard time to 0 USART bits */
XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
XPROGTarget_SendByte(0x07);
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
XPROGTarget_SendByte(TPI_CMD_SKEY);
for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
/* Wait until the NVM bus becomes active */
NVMBusEnabled = TINYNVM_WaitWhileNVMBusBusy();
}
NVMBusEnabled = TINYNVM_EnableTPI();
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
@ -172,29 +138,9 @@ static void XPROGProtocol_LeaveXPROGMode(void)
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
{
XMEGANVM_WaitWhileNVMBusBusy();
/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(0x00);
/* Do it twice to make sure it takes affect (silicon bug?) */
XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
XPROGTarget_SendByte(0x00);
XPROGTarget_DisableTargetPDI();
}
XMEGANVM_DisablePDI();
else
{
TINYNVM_WaitWhileNVMBusBusy();
/* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */
XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
XPROGTarget_SendByte(0x00);
XPROGTarget_DisableTargetTPI();
}
TINYNVM_DisableTPI();
#if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL)
ISPTarget_ConfigureRescueClock();

1
Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
Unescape View File

@ -45,7 +45,6 @@
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include "../V2Protocol.h"
#include "XPROGTarget.h"
#include "XMEGANVM.h"
#include "TINYNVM.h"

4
Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
Unescape View File

@ -39,7 +39,7 @@
#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
/** Flag to indicate if the USART is currently in Tx or Rx mode. */
volatile bool IsSending;
bool IsSending;
/** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */
void XPROGTarget_EnableTargetPDI(void)
@ -115,7 +115,7 @@ void XPROGTarget_DisableTargetTPI(void)
UCSR1B = 0;
UCSR1C = 0;
/* Set all USART lines as input, tristate */
/* Set all USART lines as inputs, tristate */
DDRD &= ~((1 << 5) | (1 << 3));
PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));

Write Preview
Loading…
Cancel
Save