diff --git a/LUFA.pnproj b/LUFA.pnproj
index 91a364435b..4fc91f63c4 100644
--- a/LUFA.pnproj
+++ b/LUFA.pnproj
@@ -1 +1 @@
-
\ No newline at end of file
+
\ No newline at end of file
diff --git a/LUFA/DoxygenPages/AlternativeStacks.txt b/LUFA/DoxygenPages/AlternativeStacks.txt
deleted file mode 100644
index f9d6cbbcde..0000000000
--- a/LUFA/DoxygenPages/AlternativeStacks.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_AlternativeStacks Alternative USB AVR Stacks
- *
- * LUFA is not the only stack available for the USB AVRs, although it is perhaps the best (see \ref Page_WhyUseLUFA).
- * In the interests of completeness and user choice, other known USB AVR stacks are listed here.
- *
- * \section Sec_HardwareStacks Hardware USB AVR Stacks
- * These are the known alternative USB stacks which are designed for and run exclusively on the USB AVR series microcontrollers,
- * which contain on-chip USB controller hardware for maximum features and speed.
- *
- * - Name: Atmel USB AVR Stack (Atmel Inc.) \n
- * Cost: Free \n
- * License: Atmel Limited License (see Atmel download for details) \n
- * Website: http://atmel.com/dyn/products/app_notes.asp?family_id=607#USB \n
- * Description: This is the official Atmel USB AVR stack, for their 8-bit USB AVR lineup. Each series of
- * USB AVR is separated into a separate download stack, which is both AVR-GCC and IAR compatible.
- *
- * - Name: Dr. Stefan Salewski's AT90USB1287 Stack (Dr. Stefan Salewski) \n
- * Cost: Free \n
- * License: GPL \n
- * Website: http://www.ssalewski.de/AT90USB_firmware.html.en \n
- * Description: This is a GPL'd library specifically designed for the AT90USB1287, by Dr. Stefan Salewski, a
- * German Physicist. It compiles for AVR-GCC and can potentially be modified to work on other USB
- * AVR models.
- *
- * - Name: FreakUSB Stack (FreakLabs) \n
- * Cost: Free \n
- * License: Modified BSD \n
- * Website: http://freaklabs.org/index.php/FreakUSB-Open-Source-USB-Device-Stack.html \n
- * Description: An open source simple USB stack for a selection of the USB AVRs. Contains a sample class driver
- * for the CDC-ACM class, however other class driver implementations are also possible.
- *
- * - Name: PJRC Teensy Stack (Paul Stoffregen) \n
- * Cost: Free \n
- * License: BSD \n
- * Website: http://www.pjrc.com/teensy/usb_debug_only.html \n
- * Description: Not so much a complete stack as a collection of USB enabled demos, this library is specifically
- * designed for the PJRC Teensy line of USB AVRs, and thus may need to be modified for other USB AVR
- * chips. These minimal code samples shows the inner workings of the USB controller, without all the
- * abstraction present in most other USB AVR stacks.
- *
- * \section Sec_SoftwareStacks Software AVR Stacks
- * These are the known alternative USB stacks which can run on regular AVR models, lacking dedicated hardware USB controllers
- * via a bit-banged (emulated) version of the USB protocol. They are limited in their capabilities due to the cycles required
- * to be dedicated to managing the USB bus, but offer a cheap way to implement USB functionality into a design.
- *
- * - Name: AVR309: Software USB (Atmel) \n
- * Cost: Free \n
- * License: None Stated \n
- * Website: http://www.atmel.com/dyn/Products/app_notes.asp?family_id=607 \n
- * Description: Atmel's official software USB implementation, an Application Note containing work by Igor Cesko. This
- * is a minimal assembly-only implementation of software USB, providing HID functionality. Less compile
- * options than V-USB (see below).
- *
- * - Name: V-USB (Objective Development) \n
- * Cost: Free for some uses, see website for licensing \n
- * License: Dual GPL2/Custom \n
- * Website: http://www.obdev.at/products/vusb/index.html \n
- * Description: Well regarded and complete USB 1.1 software stack for several AVR models, implementing Low Speed HID.
- * Used in many commercial and non-commercial designs, with user-submitted projects available for viewing
- * on the company's website. Uses C language code mixed with assembly for time-critical sections.
- */
-
diff --git a/LUFA/DoxygenPages/LUFAvsAtmelStack.txt b/LUFA/DoxygenPages/LUFAvsAtmelStack.txt
deleted file mode 100644
index 239c2772be..0000000000
--- a/LUFA/DoxygenPages/LUFAvsAtmelStack.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_LUFAvsAtmelStack LUFA vs the Atmel 8-bit USB AVR Stack
- *
- * Atmel offers an official 8-bit USB AVR stack, which may be incorporated into user projects and products. As LUFA and the Atmel
- * stack aims to give roughly the same functionality to a design, it is often asked what advantages LUFA carries over the official
- * Atmel USB stack for the 8-bit USB AVRs. Below are just some of the advantages to choosing LUFA over the official Atmel stack.
- *
- * - Licensing:
- * LUFA is released under a very permissive MIT license (see \ref Page_LicenseInfo), while the Atmel stack carries several
- * restrictions as to how and where it can be used. LUFA's licensing should be suitable for both Commercial and Non-Commercial
- * entities alike.
- *
- * - Demos and Projects:
- * Unlike the Atmel stack, LUFA comes with many different Device and Host mode Demos and Projects ready to run out of the box.
- * Atmel favors separate downloads for each of their (small set) of USB AVR demos, which requires more time and offers less
- * to the end-user. LUFA also contains several open source Bootloaders, which can be modified as the user wishes to suit his or
- * her application, instead of being forced to use Atmel's single prebuilt (closed-source) DFU bootloader.
- *
- * - Central Library Code:
- * LUFA is designed to allow the central library core code to be shared amongst several projects, so long as the compiled object
- * files are cleaned between different projects. This is in direct contrast to the Atmel library, which is strongly coupled to the
- * project it is integrated with. Using LUFA allows for only one copy of the library core to be needed for all applications, and
- * makes updating the library used in all projects a trivial copy-and-paste process.
- *
- * - Clean API:
- * One of the main design goals of LUFA is to make the API easy to use. While LUFA is a fluid project which has undergone many
- * API improvements, the API is arguably much nicer to use and easier to understand than the equivalent Atmel stack code. LUFA's
- * API is also more complete than the Atmel stack, and contains many features to speed up application development.
- *
- * - Full Hardware Support:
- * LUFA supports the full range of Atmel's USB AVR microcontrollers (see \ref Page_DeviceSupport), with porting between chips being
- * as simple as a single compile switch in many cases. Atmel's stack requires different libraries to be used based on the USB AVR
- * microcontroller series, complicating the process of moving between USB AVR models. In addition, LUFA contains drivers for all the
- * hardware contained on Atmel's USB AVR based boards, so you can get started quickly and easily.
- *
- * - Better Library Support:
- * As many people are now using LUFA, there is a community being built around it. You can get answers to your LUFA related questions
- * quickly by either emailing the library author (subject to author's schedule) or by posting to the official LUFA support mailing list.
- *
- * - More Compact Code:
- * LUFA is written from the ground up to compile optimally, using clean code and good design. Two demos giving the same functionality -
- * the LUFA Low Level API Mouse Demo vs. the Atmel AVR270 HID Mouse application note shows LUFA to be the clear size winner *.
- *
- * * LUFA Low Level Mouse Demo: 3510 bytes, Atmel AVR270 Mouse Application Note: 4222 bytes, using an identical build environment.
- */
-
diff --git a/LUFA/DoxygenPages/MainPage.txt b/LUFA/DoxygenPages/MainPage.txt
index 377841a04f..2ab420a5bc 100644
--- a/LUFA/DoxygenPages/MainPage.txt
+++ b/LUFA/DoxygenPages/MainPage.txt
@@ -39,12 +39,11 @@
*
* Subsections:
* \li \subpage Page_LicenseInfo - Project source license and commercial use information
- * \li \subpage Page_DeviceSupport - Current Device and Hardware Support
* \li \subpage Page_Donating - Donating to support this project
+ * \li \subpage Page_DeviceSupport - Current Device and Hardware Support
* \li \subpage Page_ChangeLog - Project Changelog
* \li \subpage Page_FutureChanges - Planned Changes to the Library
* \li \subpage Page_LUFAPoweredProjects - Other Projects Using LUFA
* \li \subpage Page_Resources - LUFA and USB Related Resources
- * \li \subpage Page_WhyUseLUFA - What are the advantages of using LUFA?
*/
diff --git a/LUFA/DoxygenPages/WhyUseLUFA.txt b/LUFA/DoxygenPages/WhyUseLUFA.txt
deleted file mode 100644
index b31a2e238c..0000000000
--- a/LUFA/DoxygenPages/WhyUseLUFA.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_WhyUseLUFA Why Use LUFA?
- *
- * The LUFA Library has many advantages over implementing the code required to drive the USB AVRs directly.
- * It is much more preferable to incorporate LUFA into your existing projects - or even make a new project
- * using LUFA - than it is to start from scratch and use the USB AVR registers directly. Some of these reasons
- * are:
- *
- * - Portability:
- * The LUFA stack is designed to run (at some capacity) on the entire Atmel range of USB AVRs, regardless of the
- * exact USB controller revision used. If you decide to implement your own USB stack, you will either need to
- * code around the differences between each USB AVR controller's implementation between different chip models, or
- * require your code to run on only one specific USB AVR model series.
- *
- * - Speed of Development:
- * LUFA ships with a wide range of pre-made demos, bootloaders and projects for you to try, learn and extend. Each
- * of these demos are tested (where possible) across as many USB AVRs and Operating Systems as possible, to ensure
- * that they work under as many conditions as possible. In addition, there are inbuilt class drivers for several of
- * the USB classes which you can make use of in your projects with minimal effort.
- *
- * - Maintainability:
- * As LUFA takes care of much of the USB implementation, you can be left to focusing on your actual project's
- * functionality, rather than being held back developing and debugging the USB stack code. Since LUFA uses clear APIs
- * for USB development, your code will be more readable than if it had the low level USB stack code integrated into
- * it directly. Updating the LUFA library is a simple folder-replacement and gives new features and bug fixes in
- * seconds each time a new release is made.
- *
- * - Size:
- * Not just requiring less code to make complex USB devices, LUFA is written to compile down as much as possible into
- * optimal code, to occupy only a small space for its feature set.
- *
- * - Support:
- * Since many people are now using LUFA in their own projects, you can take advantage of other's knowledge when you run
- * into difficulties or need some advice. In addition, you can also email the library author to receive personalized
- * support when you need it (subject to author's schedule).
- *
- * Subsections:
- * \li \subpage Page_LUFAvsAtmelStack - How does LUFA compare to the Atmel USB AVR stack?
- * \li \subpage Page_AlternativeStacks - Alternative USB AVR Stacks
- */
-
diff --git a/LUFA/makefile b/LUFA/makefile
index 8dd3af7f3c..b9380f4aad 100644
--- a/LUFA/makefile
+++ b/LUFA/makefile
@@ -23,50 +23,50 @@ ifeq ($(origin ARCH), undefined)
endif
# Define module source file lists
-LUFA_SRC_USB = $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Device_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Endpoint_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Host_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Pipe_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBController_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBInterrupt_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/EndpointStream_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/PipeStream_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/ConfigDescriptor.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/DeviceStandardReq.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/Events.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/HostStandardReq.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/USBTask.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Common/HIDParser.c
-LUFA_SRC_USBCLASS = $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/AudioClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/HIDClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MassStorageClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MIDIClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/RNDISClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AudioClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/CDCClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/HIDClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MassStorageClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MIDIClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/PrinterClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/RNDISClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/StillImageClassHost.c
-LUFA_SRC_TEMPERATURE = $(LUFA_ROOT_PATH)/Drivers/Board/Temperature.c
-LUFA_SRC_SERIAL = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/Serial_$(ARCH).c
-LUFA_SRC_TWI = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/TWI_$(ARCH).c
+LUFA_SRC_USB = $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Device_$(ARCH).c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Endpoint_$(ARCH).c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Host_$(ARCH).c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Pipe_$(ARCH).c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBController_$(ARCH).c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBInterrupt_$(ARCH).c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/EndpointStream_$(ARCH).c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/PipeStream_$(ARCH).c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/ConfigDescriptor.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/DeviceStandardReq.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/Events.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/HostStandardReq.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Core/USBTask.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Common/HIDParser.c
+LUFA_SRC_USBCLASS = $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/AudioClassDevice.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/HIDClassDevice.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MassStorageClassDevice.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MIDIClassDevice.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/RNDISClassDevice.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AudioClassHost.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/CDCClassHost.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/HIDClassHost.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MassStorageClassHost.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MIDIClassHost.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/PrinterClassHost.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/RNDISClassHost.c \
+ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/StillImageClassHost.c
+LUFA_SRC_TEMPERATURE = $(LUFA_ROOT_PATH)/Drivers/Board/Temperature.c
+LUFA_SRC_SERIAL = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/Serial_$(ARCH).c
+LUFA_SRC_TWI = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/TWI_$(ARCH).c
# Check to see if the LUFA_PATH variable has not been set (the makefile is not being included from a project makefile)
ifeq ($(origin LUFA_PATH), undefined)
- LUFA_VERSION_NUM = $(shell grep LUFA_VERSION_STRING Version.h | cut -d'"' -f2)
-
- LUFA_SRC_ALL_FILES = $(LUFA_SRC_USB) \
- $(LUFA_SRC_USBCLASS) \
- $(LUFA_SRC_TEMPERATURE) \
- $(LUFA_SRC_SERIAL) \
- $(LUFA_SRC_TWI)
-
+ LUFA_VERSION_NUM = $(shell grep LUFA_VERSION_STRING Version.h | cut -d'"' -f2)
+
+ LUFA_SRC_ALL_FILES = $(LUFA_SRC_USB) \
+ $(LUFA_SRC_USBCLASS) \
+ $(LUFA_SRC_TEMPERATURE) \
+ $(LUFA_SRC_SERIAL) \
+ $(LUFA_SRC_TWI)
+
EXCLUDE_FROM_EXPORT = Documentation DoxygenPages CodeTemplates *.conf *.tar *.o *.lss *.lst *.hex *.elf *.bin
all: