Add support for 9key by Bishop Keyboards

pull/1630/head
Cory Shaw 7 years ago committed by Jack Humbert
parent bd484f18bd
commit d8fd33dd5e

@ -0,0 +1,5 @@
#include "9key.h"
void matrix_init_kb(void) {
matrix_init_user();
}

@ -0,0 +1,17 @@
#ifndef NINEKEY_H
#define NINEKEY_H
#include "quantum.h"
#define KEYMAP( \
k00, k01, k02, \
k10, k11, k12, \
k20, k21, k22 \
) \
{ \
{ k00, k01, k02 }, \
{ k10, k11, k12 }, \
{ k20, k21, k22 } \
}
#endif

@ -0,0 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif

@ -0,0 +1,52 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0007
#define DEVICE_VER 0x0001
#define MANUFACTURER Bishop Keyboards
#define PRODUCT 9Key
#define DESCRIPTION Bishop Keyboards 9Key // Charleston, SC Meetup Handout
/* key matrix size */
#define MATRIX_ROWS 3
#define MATRIX_COLS 3
/* 9Key PCB default pin-out */
#define MATRIX_ROW_PINS { D1, D0, D4 }
#define MATRIX_COL_PINS { F4, F5, F6 }
#define UNUSED_PINS
/* ws2812 RGB LED */
#define RGB_DI_PIN F7
#define RGBLIGHT_TIMER
#define RGBLED_NUM 1 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define TAPPING_TERM 150
#endif

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

@ -0,0 +1,47 @@
#include "9key.h"
// Tap Dance Declarations
enum {
ENT_5 = 0
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* LAYER 0
* ,-----------------.
* | 1 | 2 | 3 |
* |-----+-----+-----|
* | 4 |5/ENT| 6 | Dbl Tap 5 for Enter
* |-----+-----+-----|
* | 7 | 8 | FN |
* `-----------------'
*/
[0] = KEYMAP( \
KC_1, KC_2, KC_3, \
KC_4, TD(ENT_5), KC_6, \
KC_7, KC_8, MO(1) \
),
/* LAYER 1
* ,-----------------.
* | 9 | 0 | - |
* |-----+-----+-----|
* | + | * | / |
* |-----+-----+-----|
* | F1 | F2 | |
* `-----------------'
*/
[1] = KEYMAP( \
KC_9, KC_0, KC_MINS, \
KC_PLUS, KC_ASTR, KC_SLSH, \
KC_F1, KC_F2, KC_TRNS \
)
};
qk_tap_dance_action_t tap_dance_actions[] = {
[ENT_5] = ACTION_TAP_DANCE_DOUBLE(KC_5, KC_ENT)
};
void matrix_init_user(void) {
}

@ -0,0 +1,69 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = yes # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
API_SYSEX_ENABLE = yes
TAP_DANCE_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
Loading…
Cancel
Save