From d9643cf6ece3b36fbdb950c56957162dfb0226af Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 13 Jul 2011 23:50:05 +0000 Subject: [PATCH] Add start of an architecture port to the Atmel USB XMEGA devices. --- LUFA.pnproj | 2 +- LUFA/CodeTemplates/makefile_template.xmega | 707 ++++++++++++++++ LUFA/Common/Architectures.h | 5 +- LUFA/Common/Common.h | 35 +- LUFA/Drivers/USB/Core/Device.h | 2 + LUFA/Drivers/USB/Core/Endpoint.h | 2 + LUFA/Drivers/USB/Core/EndpointStream.h | 2 + LUFA/Drivers/USB/Core/StdDescriptors.h | 2 +- LUFA/Drivers/USB/Core/USBController.h | 4 +- LUFA/Drivers/USB/Core/USBInterrupt.h | 2 + LUFA/Drivers/USB/Core/USBMode.h | 13 + LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c | 44 + LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h | 215 +++++ .../USB/Core/XMEGA/EndpointStream_XMEGA.c | 201 +++++ .../USB/Core/XMEGA/EndpointStream_XMEGA.h | 648 ++++++++++++++ LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c | 67 ++ LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h | 787 ++++++++++++++++++ LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c | 37 + .../Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c | 37 + LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c | 37 + .../Template/Template_Endpoint_Control_R.c | 83 ++ .../Template/Template_Endpoint_Control_W.c | 92 ++ .../XMEGA/Template/Template_Endpoint_RW.c | 88 ++ .../USB/Core/XMEGA/USBController_XMEGA.c | 77 ++ .../USB/Core/XMEGA/USBController_XMEGA.h | 359 ++++++++ .../USB/Core/XMEGA/USBInterrupt_XMEGA.c | 45 + .../USB/Core/XMEGA/USBInterrupt_XMEGA.h | 112 +++ LUFA/ManPages/ChangeLog.txt | 2 + LUFA/ManPages/DeviceSupport.txt | 18 + 29 files changed, 3720 insertions(+), 5 deletions(-) create mode 100644 LUFA/CodeTemplates/makefile_template.xmega create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h create mode 100644 LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h create mode 100644 LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c create mode 100644 LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h diff --git a/LUFA.pnproj b/LUFA.pnproj index 309dae4149..0b530311ae 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/LUFA/CodeTemplates/makefile_template.xmega b/LUFA/CodeTemplates/makefile_template.xmega new file mode 100644 index 0000000000..2ceca1faab --- /dev/null +++ b/LUFA/CodeTemplates/makefile_template.xmega @@ -0,0 +1,707 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# Denver Gingerich +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# MCU name +MCU = ### INSERT NAME OF MICROCONTROLLER MODEL HERE ### + + +# Targeted chip architecture (see library "Architectures" documentation) +ARCH = XMEGA + + +# Target board (see library "Board Types" documentation, NONE for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = ### INSERT NAME OF BOARD HERE, OR NONE IF NO BOARD DRIVERS USED ### + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This should be the frequency the system core runs at, after the system clock +# has been set up correctly and started. +F_CPU = ### INSERT PRESCALED SYSTEM CLOCK SPEED HERE, IN HZ ### + + +# USB controller master clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU, as the USB clock is often sourced from the same oscillator as +# the CPU clock, but run through multipliers and dividers to achieve the desired +# clock rate. +# +# For the UC3 chips, this should be equal to 48MHz or 96MHz. +F_USB = ### INSERT CLOCK TO USB MODULE HERE, IN HZ ### + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = ### INSERT NAME OF MAIN FILENAME HERE, WITHOUT EXTENSION ### + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Path to the LUFA library +LUFA_PATH = ### INSERT PATH TO LUFA LIBRARY RELATIVE TO PROJECT DIRECTORY HERE ### + + +# LUFA library compile-time options and predefined tokens (add '-D' before each token) +LUFA_OPTS = ### INSERT LUFA COMPILE TIME TOKES HERE ### + + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + + +# List C source files here. (C dependencies are automatically generated.) +SRC = $(TARGET).c \ + $(LUFA_SRC_USB) \ + $(LUFA_SRC_USBCLASS) + ### INSERT ADDITIONAL PROJECT SOURCE FILENAMES OR LUFA MODULE NAMES HERE ### + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = $(LUFA_PATH)/ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += -DF_USB=$(F_USB)UL +CDEFS += -DBOARD=BOARD_$(BOARD) +CDEFS += -DARCH=ARCH_$(ARCH) +CDEFS += $(LUFA_OPTS) + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += -DF_USB=$(F_USB)UL +ADEFS += -DBOARD=BOARD_$(BOARD) +ADEFS += -DARCH=ARCH_$(ARCH) +ADEFS += $(LUFA_OPTS) + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +CPPDEFS += -DF_USB=$(F_USB)UL +CPPDEFS += -DBOARD=BOARD_$(BOARD) +CPPDEFS += -DARCH=ARCH_$(ARCH) +CPPDEFS += $(LUFA_OPTS) + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fno-inline-small-functions +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -fno-strict-aliasing +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -ffunction-sections +CPPFLAGS += -fno-strict-aliasing +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = jtagmkII + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = usb + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf +MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) + + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + +flip: $(TARGET).hex + batchisp -hardware usb -device $(MCU) -operation erase f + batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + +dfu: $(TARGET).hex + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash $(TARGET).hex + dfu-programmer $(MCU) reset + +flip-ee: $(TARGET).hex $(TARGET).eep + $(COPY) $(TARGET).eep $(TARGET)eep.hex + batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase + batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + $(REMOVE) $(TARGET)eep.hex + +dfu-ee: $(TARGET).hex $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash $(TARGET).eep + dfu-programmer $(MCU) reset + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + +doxygen: + @echo Generating Project Documentation... + @doxygen Doxygen.conf + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +checksource: + @for f in $(SRC) $(CPPSRC) $(ASRC); do \ + if [ -f $$f ]; then \ + echo "Found Source File: $$f" ; \ + else \ + echo "Source File Not Found: $$f" ; \ + fi; done + + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff doxygen clean \ +clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ +debug gdb-config checksource diff --git a/LUFA/Common/Architectures.h b/LUFA/Common/Architectures.h index 30d8c82494..8dab72ae0f 100644 --- a/LUFA/Common/Architectures.h +++ b/LUFA/Common/Architectures.h @@ -65,7 +65,10 @@ #define ARCH_AVR8 0 /** Selects the Atmel 32-bit UC3 AVR (AT32UC3* chips) architecture. */ - #define ARCH_UC3 1 + #define ARCH_UC3 1 + + /** Selects the Atmel XMEGA AVR (ATXMEGA*U chips) architecture. */ + #define ARCH_XMEGA 2 #if !defined(__DOXYGEN__) #define ARCH_ ARCH_AVR8 diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h index 87fc08cb1c..d46f92153b 100644 --- a/LUFA/Common/Common.h +++ b/LUFA/Common/Common.h @@ -119,6 +119,21 @@ #define ARCH_BIG_ENDIAN #include "Endianness.h" + #elif (ARCH == ARCH_XMEGA) + #include + #include + #include + #include + #include + + typedef uint8_t uint_reg_t; + + #define ARCH_HAS_EEPROM_ADDRESS_SPACE + #define ARCH_HAS_FLASH_ADDRESS_SPACE + #define ARCH_HAS_MULTI_ADDRESS_SPACE + #define ARCH_LITTLE_ENDIAN + + #include "Endianness.h" #else #error Unknown device architecture specified. #endif @@ -289,6 +304,16 @@ __builtin_mtsr(AVR32_COUNT, 0); while (__builtin_mfsr(AVR32_COUNT) < (F_CPU / 1000)); } + #elif (ARCH == ARCH_XMEGA) + if (GCC_IS_COMPILE_CONST(Milliseconds)) + { + _delay_ms(Milliseconds); + } + else + { + while (Milliseconds--) + _delay_ms(1); + } #endif } @@ -308,7 +333,9 @@ #if (ARCH == ARCH_AVR8) return SREG; #elif (ARCH == ARCH_UC3) - return __builtin_mfsr(AVR32_SR); + return __builtin_mfsr(AVR32_SR); + #elif (ARCH == ARCH_XMEGA) + return SREG; #endif GCC_MEMORY_BARRIER(); @@ -334,6 +361,8 @@ __builtin_ssrf(AVR32_SR_GM_OFFSET); else __builtin_csrf(AVR32_SR_GM_OFFSET); + #elif (ARCH == ARCH_XMEGA) + SREG = GlobalIntState; #endif GCC_MEMORY_BARRIER(); @@ -352,6 +381,8 @@ sei(); #elif (ARCH == ARCH_UC3) __builtin_csrf(AVR32_SR_GM_OFFSET); + #elif (ARCH == ARCH_XMEGA) + sei(); #endif GCC_MEMORY_BARRIER(); @@ -370,6 +401,8 @@ cli(); #elif (ARCH == ARCH_UC3) __builtin_ssrf(AVR32_SR_GM_OFFSET); + #elif (ARCH == ARCH_XMEGA) + cli(); #endif GCC_MEMORY_BARRIER(); diff --git a/LUFA/Drivers/USB/Core/Device.h b/LUFA/Drivers/USB/Core/Device.h index 85fdfacf10..68e5e93875 100644 --- a/LUFA/Drivers/USB/Core/Device.h +++ b/LUFA/Drivers/USB/Core/Device.h @@ -144,6 +144,8 @@ #include "AVR8/Device_AVR8.h" #elif (ARCH == ARCH_UC3) #include "UC3/Device_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/Device_XMEGA.h" #endif /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/USB/Core/Endpoint.h b/LUFA/Drivers/USB/Core/Endpoint.h index d61c5b13fc..877f0c138b 100644 --- a/LUFA/Drivers/USB/Core/Endpoint.h +++ b/LUFA/Drivers/USB/Core/Endpoint.h @@ -108,6 +108,8 @@ #include "AVR8/Endpoint_AVR8.h" #elif (ARCH == ARCH_UC3) #include "UC3/Endpoint_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/Endpoint_XMEGA.h" #endif /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/USB/Core/EndpointStream.h b/LUFA/Drivers/USB/Core/EndpointStream.h index 296dfe51fe..f360877cf6 100644 --- a/LUFA/Drivers/USB/Core/EndpointStream.h +++ b/LUFA/Drivers/USB/Core/EndpointStream.h @@ -109,6 +109,8 @@ #include "AVR8/EndpointStream_AVR8.h" #elif (ARCH == ARCH_UC3) #include "UC3/EndpointStream_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/EndpointStream_XMEGA.h" #endif /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/USB/Core/StdDescriptors.h b/LUFA/Drivers/USB/Core/StdDescriptors.h index 852a5d7bd6..0399302dc1 100644 --- a/LUFA/Drivers/USB/Core/StdDescriptors.h +++ b/LUFA/Drivers/USB/Core/StdDescriptors.h @@ -637,7 +637,7 @@ { USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ - #if (ARCH == ARCH_AVR8) + #if ((ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA)) wchar_t UnicodeString[]; #else uint16_t UnicodeString[]; /**< String data, as unicode characters (alternatively, diff --git a/LUFA/Drivers/USB/Core/USBController.h b/LUFA/Drivers/USB/Core/USBController.h index ac3b9ca174..290ed9f086 100644 --- a/LUFA/Drivers/USB/Core/USBController.h +++ b/LUFA/Drivers/USB/Core/USBController.h @@ -66,7 +66,9 @@ #if (ARCH == ARCH_AVR8) #include "AVR8/USBController_AVR8.h" #elif (ARCH == ARCH_UC3) - #include "UC3/USBController_UC3.h" + #include "UC3/USBController_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/USBController_XMEGA.h" #endif /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/USB/Core/USBInterrupt.h b/LUFA/Drivers/USB/Core/USBInterrupt.h index c1a2b62270..c69d15a842 100644 --- a/LUFA/Drivers/USB/Core/USBInterrupt.h +++ b/LUFA/Drivers/USB/Core/USBInterrupt.h @@ -60,6 +60,8 @@ #include "AVR8/USBInterrupt_AVR8.h" #elif (ARCH == ARCH_UC3) #include "UC3/USBInterrupt_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/USBInterrupt_XMEGA.h" #endif /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/USB/Core/USBMode.h b/LUFA/Drivers/USB/Core/USBMode.h index fad94226fa..189dd6ee0d 100644 --- a/LUFA/Drivers/USB/Core/USBMode.h +++ b/LUFA/Drivers/USB/Core/USBMode.h @@ -174,6 +174,19 @@ #define USB_SERIES_UC3B1_AVR32 #define USB_CAN_BE_DEVICE #define USB_CAN_BE_HOST + #elif (defined(__AVR_ATxmega128A1U__)) + #define USB_SERIES_A1U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__)) + #define USB_SERIES_A4U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \ + defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__)) + #define USB_SERIES_A3U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega256A3BU__)) + #define USB_SERIES_A3BU_XMEGA + #define USB_CAN_BE_DEVICE #endif #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST)) diff --git a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c new file mode 100644 index 0000000000..1294814f34 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c @@ -0,0 +1,44 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "../Device.h" + +void USB_Device_SendRemoteWakeup(void) +{ + // TODO +} + +#endif + diff --git a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h new file mode 100644 index 0000000000..805e8f9ba7 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h @@ -0,0 +1,215 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Device definitions for the AVR XMEGA microcontrollers. + * \copydetails Group_Device_XMEGA + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Device + * \defgroup Group_Device_XMEGA Device Management (XMEGA) + * \brief USB Device definitions for the AVR XMEGA microcontrollers. + * + * Architecture specific USB Device definitions for the Atmel AVR XMEGA microcontrollers. + * + * @{ + */ + +#ifndef __USBDEVICE_XMEGA_H__ +#define __USBDEVICE_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../StdDescriptors.h" + #include "../USBInterrupt.h" + #include "../Endpoint.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)) + #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Device Mode Option Masks */ + //@{ + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in low speed (1.5Mb/s) mode. + * + * \note Low Speed mode is not available on all USB AVR models. + * \n + * + * \note Restrictions apply on the number, size and type of endpoints which can be used + * when running in low speed mode - refer to the USB 2.0 specification. + */ + #define USB_DEVICE_OPT_LOWSPEED (1 << 0) + + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in full speed (12Mb/s) mode. + */ + #define USB_DEVICE_OPT_FULLSPEED (0 << 0) + //@} + + /** String descriptor index for the device's unique serial number string descriptor within the device. + * This unique serial number is used by the host to associate resources to the device (such as drivers or COM port + * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain + * a unique serial number internally, and setting the device descriptors serial number string index to this value + * will cause it to use the internal serial number. + * + * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial + * number for the device. + */ + #define USE_INTERNAL_SERIAL NO_DESCRIPTOR + + /** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller + * model. + */ + #define INTERNAL_SERIAL_LENGTH_BITS 0 + + /** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller + * model. + */ + #define INTERNAL_SERIAL_START_ADDRESS 0 + + /* Function Prototypes: */ + /** Sends a Remote Wakeup request to the host. This signals to the host that the device should + * be taken out of suspended mode, and communications should resume. + * + * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the + * host computer when the host has suspended all USB devices to enter a low power state. + * + * \note This macro should only be used if the device has indicated to the host that it + * supports the Remote Wakeup feature in the device descriptors, and should only be + * issued if the host is currently allowing remote wakeup events from the device (i.e., + * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP + * compile time option is used, this macro is unavailable. + * \n\n + * + * \note The USB clock must be running for this function to operate. If the stack is initialized with + * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running + * before attempting to call this function. + * + * \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors. + */ + void USB_Device_SendRemoteWakeup(void); + + /* Inline Functions: */ + /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host) + * the frame number is incremented by one. + */ + static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint16_t USB_Device_GetFrameNumber(void) + { + return 0; // TODO + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the device mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when enumerated in device mode. + * + * \note Not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableSOFEvents(void) + { + // TODO + } + + /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode. + * + * \note Not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_DisableSOFEvents(void) + { + // TODO + } + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Inline Functions: */ + static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetLowSpeed(void) + { + // TODO + } + + static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetFullSpeed(void) + { + // TODO + } + + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) + { + // TODO + } + + static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_Device_IsAddressSet(void) + { + return false; // TODO + } + + #if (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) + static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1); + static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) + { + // TODO + } + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c new file mode 100644 index 0000000000..9a0a195614 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c @@ -0,0 +1,201 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "EndpointStream_XMEGA.h" + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + return 0; // TODO +} + +uint8_t Endpoint_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + return 0; // TODO +} + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_RW.c" + +#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" +#endif + +#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE + #define TEMPLATE_BUFFER_TYPE void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE + #define TEMPLATE_BUFFER_TYPE void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_RW.c" +#endif + +#endif + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_Control_W.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_Control_W.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_Control_R.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_Control_R.c" + +#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" +#endif + +#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_Control_R.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_Control_R.c" +#endif + +#endif diff --git a/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h new file mode 100644 index 0000000000..72a883091e --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h @@ -0,0 +1,648 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Endpoint data stream transmission and reception management for the AVR XMEGA microcontrollers. + * \copydetails Group_EndpointStreamRW_XMEGA + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointStreamRW + * \defgroup Group_EndpointStreamRW_XMEGA Read/Write of Multi-Byte Streams (XMEGA) + * \brief Endpoint data stream transmission and reception management for the Atmel AVR XMEGA architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to endpoints. + * + * @{ + */ + +#ifndef __ENDPOINT_STREAM_XMEGA_H__ +#define __ENDPOINT_STREAM_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Function Prototypes: */ + /** \name Stream functions for null data */ + //@{ + + /** Reads and discards the given number of bytes from the currently selected endpoint's bank, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * Single Stream Transfer Example: + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * Partial Stream Transfers Example: + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Length Number of bytes to discard via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending + * full packets to the host as needed. The last packet is not automatically sent once the + * remaining bytes have been written; the user is responsible for manually sending the last + * packet to the host via the \ref Endpoint_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * Single Stream Transfer Example: + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * Partial Stream Transfers Example: + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Length Number of zero bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + //@} + + /** \name Stream functions for RAM source/destination data */ + //@{ + + /** Writes the given number of bytes to the endpoint from the given buffer in little endian, + * sending full packets to the host as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Endpoint_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * Single Stream Transfer Example: + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * Partial Stream Transfers Example: + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Stream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the endpoint from the given buffer in big endian, + * sending full packets to the host as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Endpoint_ClearIN() macro. + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Stream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the endpoint from the given buffer in little endian, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * Single Stream Transfer Example: + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * Partial Stream Transfers Example: + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Stream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the endpoint from the given buffer in big endian, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Stream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian, + * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared + * in both failure and success states; the user is responsible for manually clearing the setup OUT to + * finalize the transfer via the \ref Endpoint_ClearOUT() macro. + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian, + * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared + * in both failure and success states; the user is responsible for manually clearing the setup OUT to + * finalize the transfer via the \ref Endpoint_ClearOUT() macro. + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian, + * discarding fully read packets from the host as needed. The device IN acknowledgement is not + * automatically sent after success or failure states; the user is responsible for manually sending the + * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian, + * discarding fully read packets from the host as needed. The device IN acknowledgement is not + * automatically sent after success or failure states; the user is responsible for manually sending the + * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /** \name Stream functions for EEPROM source/destination data */ + //@{ + + /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_EStream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_EStream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_LE(). + * + * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_EStream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_BE(). + * + * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_EStream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE. + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_EStream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE(). + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_EStream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE(). + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_EStream_LE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE(). + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /** \name Stream functions for PROGMEM source/destination data */ + //@{ + + /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_PStream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_PStream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_PStream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \note This function automatically clears the control transfer's status stage. Do not manually attempt + * to clear the status stage when using this routine in a control transaction. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c new file mode 100644 index 0000000000..154020c417 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c @@ -0,0 +1,67 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "../Endpoint.h" + +#if !defined(FIXED_CONTROL_ENDPOINT_SIZE) +uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; +#endif + +bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, + const uint8_t UECFG0XData, + const uint8_t UECFG1XData) +{ + // TODO +} + +void Endpoint_ClearEndpoints(void) +{ + // TODO +} + +void Endpoint_ClearStatusStage(void) +{ + // TODO +} + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_WaitUntilReady(void) +{ + return 0; // TODO +} +#endif + +#endif + diff --git a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h new file mode 100644 index 0000000000..e43422ef50 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h @@ -0,0 +1,787 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Endpoint definitions for the AVR XMEGA microcontrollers. + * \copydetails Group_EndpointManagement_XMEGA + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointRW + * \defgroup Group_EndpointRW_XMEGA Endpoint Data Reading and Writing (XMEGA) + * \brief Endpoint data read/write definitions for the Atmel AVR XMEGA architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints. + */ + +/** \ingroup Group_EndpointPrimitiveRW + * \defgroup Group_EndpointPrimitiveRW_XMEGA Read/Write of Primitive Data Types (XMEGA) + * \brief Endpoint primitive read/write definitions for the Atmel AVR XMEGA architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to endpoints. + */ + +/** \ingroup Group_EndpointPacketManagement + * \defgroup Group_EndpointPacketManagement_XMEGA Endpoint Packet Management (XMEGA) + * \brief Endpoint packet management definitions for the Atmel AVR XMEGA architecture. + * + * Functions, macros, variables, enums and types related to packet management of endpoints. + */ + +/** \ingroup Group_EndpointManagement + * \defgroup Group_EndpointManagement_XMEGA Endpoint Management (XMEGA) + * \brief Endpoint management definitions for the Atmel AVR XMEGA architecture. + * + * Functions, macros and enums related to endpoint management when in USB Device mode. This + * module contains the endpoint management macros, as well as endpoint interrupt and data + * send/receive functions for various data types. + * + * @{ + */ + +#ifndef __ENDPOINT_XMEGA_H__ +#define __ENDPOINT_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define _ENDPOINT_GET_MAXSIZE(EPIndex) _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## EPIndex) + #define _ENDPOINT_GET_MAXSIZE2(EPDetails) _ENDPOINT_GET_MAXSIZE3(EPDetails) + #define _ENDPOINT_GET_MAXSIZE3(MaxSize, Banks) (MaxSize) + + #define _ENDPOINT_GET_BANKS(EPIndex) _ENDPOINT_GET_BANKS2(ENDPOINT_DETAILS_EP ## EPIndex) + #define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails) + #define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks) + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + #define ENDPOINT_DETAILS_MAXEP 7 + + #define ENDPOINT_DETAILS_EP0 64, 1 + #define ENDPOINT_DETAILS_EP1 256, 2 + #define ENDPOINT_DETAILS_EP2 64, 2 + #define ENDPOINT_DETAILS_EP3 64, 2 + #define ENDPOINT_DETAILS_EP4 64, 2 + #define ENDPOINT_DETAILS_EP5 64, 2 + #define ENDPOINT_DETAILS_EP6 64, 2 + #else + #define ENDPOINT_DETAILS_MAXEP 5 + + #define ENDPOINT_DETAILS_EP0 64, 1 + #define ENDPOINT_DETAILS_EP1 64, 1 + #define ENDPOINT_DETAILS_EP2 64, 1 + #define ENDPOINT_DETAILS_EP3 64, 2 + #define ENDPOINT_DETAILS_EP4 64, 2 + #endif + + /* Inline Functions: */ + static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST + ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) + { + return 0; // TODO + } + + /* Function Prototypes: */ + void Endpoint_ClearEndpoints(void); + bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, + const uint8_t UECFG0XData, + const uint8_t UECFG1XData); + + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name Endpoint Direction Masks */ + //@{ + /** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint + * should be initialized in the OUT direction - i.e. data flows from host to device. + */ + #define ENDPOINT_DIR_OUT (0 << EPDIR) + + /** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint + * should be initialized in the IN direction - i.e. data flows from device to host. + */ + #define ENDPOINT_DIR_IN (1 << EPDIR) + //@} + + /** \name Endpoint Bank Mode Masks */ + //@{ + /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates + * that the endpoint should have one single bank, which requires less USB FIFO memory but results + * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's + * bank at the one time. + */ + #define ENDPOINT_BANK_SINGLE (0 << EPBK0) + + /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates + * that the endpoint should have two banks, which requires more USB FIFO memory but results + * in faster transfers as one USB device (the AVR or the host) can access one bank while the other + * accesses the second bank. + */ + #define ENDPOINT_BANK_DOUBLE (1 << EPBK0) + //@} + + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size + * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. + */ + #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 + #endif + + /** Retrieves the maximum bank size in bytes of a given endpoint. + * + * \note This macro will only work correctly on endpoint indexes that are compile-time constants + * defined by the preprocessor. + * + * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) + */ + #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex) + + /** Retrieves the total number of banks supported by the given endpoint. + * + * \note This macro will only work correctly on endpoint indexes that are compile-time constants + * defined by the preprocessor. + * + * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) + */ + #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex) + + #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different USB AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP + #else + #define ENDPOINT_TOTAL_ENDPOINTS 1 + #endif + + /* Enums: */ + /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function. + * + * \ingroup Group_EndpointRW_XMEGA + */ + enum Endpoint_WaitUntilReady_ErrorCodes_t + { + ENDPOINT_READYWAIT_NoError = 0, /**< Endpoint is ready for next packet, no error. */ + ENDPOINT_READYWAIT_EndpointStalled = 1, /**< The endpoint was stalled during the stream + * transfer by the host or device. + */ + ENDPOINT_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while + * waiting for the endpoint to become ready. + */ + ENDPOINT_READYWAIT_BusSuspended = 3, /**< The USB bus has been suspended by the host and + * no USB endpoint traffic can occur until the bus + * has resumed. + */ + ENDPOINT_READYWAIT_Timeout = 4, /**< The host failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + }; + + /* Inline Functions: */ + /** Configures the specified endpoint number with the given endpoint type, direction, bank size + * and banking mode. Once configured, the endpoint may be read from or written to, depending + * on its direction. + * + * \param[in] Number Endpoint number to configure. This must be more than 0 and less than + * \ref ENDPOINT_TOTAL_ENDPOINTS. + * + * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types + * are available on Low Speed USB devices - refer to the USB 2.0 specification. + * + * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN. + * All endpoints (except Control type) are unidirectional - data may only be read + * from or written to the endpoint bank based on its direction, not both. + * + * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted + * to the USB host, or after they have been received from the USB host (depending on + * the endpoint's data direction). The bank size must indicate the maximum packet size + * that the endpoint can handle. + * + * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask. + * More banks uses more USB DPRAM, but offers better performance. Isochronous type + * endpoints must have at least two banks. + * + * \note When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints must be configured in + * ascending order, or bank corruption will occur. + * \n\n + * + * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - refer to + * the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint. + * \n\n + * + * \note The default control endpoint should not be manually configured by the user application, as + * it is automatically configured by the library internally. + * \n\n + * + * \note This routine will automatically select the specified endpoint upon success. Upon failure, the endpoint + * which failed to reconfigure correctly will be selected. + * + * \return Boolean \c true if the configuration succeeded, \c false otherwise. + */ + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + const uint8_t Type, + const uint8_t Direction, + const uint16_t Size, + const uint8_t Banks) ATTR_ALWAYS_INLINE; + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + const uint8_t Type, + const uint8_t Direction, + const uint16_t Size, + const uint8_t Banks) + { + return 0; // TODO + } + + /** Indicates the number of bytes currently stored in the current endpoint's selected bank. + * + * \note The return width of this function may differ, depending on the maximum endpoint bank size + * of the selected AVR model. + * + * \ingroup Group_EndpointRW_XMEGA + * + * \return Total number of bytes in the currently selected Endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_BytesInEndpoint(void) + { + return 0; // TODO + } + + /** Get the endpoint address of the currently selected endpoint. This is typically used to save + * the currently selected endpoint number so that it can be restored after another endpoint has + * been manipulated. + * + * \return Index of the currently selected endpoint. + */ + static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetCurrentEndpoint(void) + { + return 0; // TODO + } + + /** Selects the given endpoint number. If the address from the device descriptors is used, the + * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint + * number (and discarding the endpoint direction bit). + * + * Any endpoint operations which do not require the endpoint number to be indicated will operate on + * the currently selected endpoint. + * + * \param[in] EndpointNumber Endpoint number to select. + */ + static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) + { + // TODO + } + + /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's + * data In and Out pointers to the bank's contents. + * + * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset. + */ + static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) + { + // TODO + } + + /** Enables the currently selected endpoint so that data can be sent and received through it to + * and from a host. + * + * \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint(). + */ + static inline void Endpoint_EnableEndpoint(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_EnableEndpoint(void) + { + // TODO + } + + /** Disables the currently selected endpoint so that data cannot be sent and received through it + * to and from a host. + */ + static inline void Endpoint_DisableEndpoint(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_DisableEndpoint(void) + { + // TODO + } + + /** Determines if the currently selected endpoint is enabled, but not necessarily configured. + * + * \return Boolean \c true if the currently selected endpoint is enabled, \c false otherwise. + */ + static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsEnabled(void) + { + return 0; // TODO + } + + /** Retrieves the number of busy banks in the currently selected endpoint, which have been queued for + * transmission via the \ref Endpoint_ClearIN() command, or are awaiting acknowledgement via the + * \ref Endpoint_ClearOUT() command. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Total number of busy banks in the selected endpoint. + */ + static inline uint8_t Endpoint_GetBusyBanks(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Endpoint_GetBusyBanks(void) + { + return 0; // TODO + } + + /** Aborts all pending IN transactions on the currently selected endpoint, once the bank + * has been queued for transmission to the host via \ref Endpoint_ClearIN(). This function + * will terminate all queued transactions, resetting the endpoint banks ready for a new + * packet. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + static inline void Endpoint_AbortPendingIN(void) + { + // TODO + } + + /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint + * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN + * direction). This function will return false if an error has occurred in the endpoint, if the endpoint + * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN + * direction and the endpoint bank is full. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if the currently selected endpoint may be read from or written to, depending + * on its direction. + */ + static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsReadWriteAllowed(void) + { + return 0; // TODO + } + + /** Determines if the currently selected endpoint is configured. + * + * \return Boolean \c true if the currently selected endpoint has been configured, \c false otherwise. + */ + static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsConfigured(void) + { + return 0; // TODO + } + + /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their + * interrupt duration has elapsed. Which endpoints have interrupted can be determined by + * masking the return value against (1 << {Endpoint Number}). + * + * \return Mask whose bits indicate which endpoints have interrupted. + */ + static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointInterrupts(void) + { + return 0; // TODO + } + + /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type + * endpoints). + * + * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested. + * + * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. + */ + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) + { + return 0; // TODO + } + + /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if the current endpoint is ready for an IN packet, \c false otherwise. + */ + static inline bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsINReady(void) + { + return 0; // TODO + } + + /** Determines if the selected OUT endpoint has received new packet from the host. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if current endpoint is has received an OUT packet, \c false otherwise. + */ + static inline bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsOUTReceived(void) + { + return 0; // TODO + } + + /** Determines if the current CONTROL type endpoint has received a SETUP packet. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if the selected endpoint has received a SETUP packet, \c false otherwise. + */ + static inline bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsSETUPReceived(void) + { + return 0; // TODO + } + + /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the + * endpoint for the next packet. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \note This is not applicable for non CONTROL type endpoints. + */ + static inline void Endpoint_ClearSETUP(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearSETUP(void) + { + // TODO + } + + /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the + * next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + static inline void Endpoint_ClearIN(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearIN(void) + { + // TODO + } + + /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint + * for the next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + static inline void Endpoint_ClearOUT(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearOUT(void) + { + // TODO + } + + /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the + * indicated endpoint and that the current transfer sequence should be aborted. This provides a + * way for devices to indicate invalid commands to the host so that the current transfer can be + * aborted and the host can begin its own recovery sequence. + * + * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro + * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected + * endpoint. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + static inline void Endpoint_StallTransaction(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_StallTransaction(void) + { + // TODO + } + + /** Clears the STALL condition on the currently selected endpoint. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearStall(void) + { + // TODO + } + + /** Determines if the currently selected endpoint is stalled, false otherwise. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if the currently selected endpoint is stalled, \c false otherwise. + */ + static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsStalled(void) + { + return 0; // TODO + } + + /** Resets the data toggle of the currently selected endpoint. */ + static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetDataToggle(void) + { + // TODO + } + + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointDirection(void) + { + return 0; // TODO + } + + /** Sets the direction of the currently selected endpoint. + * + * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask) + { + // TODO + } + + /** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next byte in the currently selected endpoint's FIFO buffer. + */ + static inline uint8_t Endpoint_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_Read_8(void) + { + return 0; // TODO + } + + /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write into the the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_8(const uint8_t Data) + { + // TODO + } + + /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + */ + static inline void Endpoint_Discard_8(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_8(void) + { + // TODO + } + + /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next two bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_16_LE(void) + { + return 0; // TODO + } + + /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next two bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_16_BE(void) + { + return 0; // TODO + } + + /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_16_LE(const uint16_t Data) + { + // TODO + } + + /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_16_BE(const uint16_t Data) + { + // TODO + } + + /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + */ + static inline void Endpoint_Discard_16(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_16(void) + { + // TODO + } + + /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next four bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_32_LE(void) + { + return 0; // TODO + } + + /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next four bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_32_BE(void) + { + return 0; // TODO + } + + /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_32_LE(const uint32_t Data) + { + // TODO + } + + /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_32_BE(const uint32_t Data) + { + // TODO + } + + /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + */ + static inline void Endpoint_Discard_32(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_32(void) + { + // TODO + } + + /* External Variables: */ + /** Global indicating the maximum packet size of the default control endpoint located at address + * 0 in the device. This value is set to the value indicated in the device descriptor in the user + * project once the USB interface is initialized into device mode. + * + * If space is an issue, it is possible to fix this to a static value by defining the control + * endpoint size in the \c FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile + * via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically + * read from the descriptors at runtime and instead fixed to the given value. When used, it is + * important that the descriptor control endpoint size value matches the size given as the + * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token + * be used in the device descriptors to ensure this. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + extern uint8_t USB_Device_ControlEndpointSize; + #else + #define USB_Device_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE + #endif + + /* Function Prototypes: */ + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, + * with respect to the data direction. This is a convenience function which can be used to + * simplify user control request handling. + */ + void Endpoint_ClearStatusStage(void); + + /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data + * to be read or written to it. + * + * \note This routine should not be called on CONTROL type endpoints. + * + * \ingroup Group_EndpointRW_XMEGA + * + * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t Endpoint_WaitUntilReady(void); + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c new file mode 100644 index 0000000000..d58ad2dfbc --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c @@ -0,0 +1,37 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#endif + diff --git a/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c new file mode 100644 index 0000000000..515c38df5f --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c @@ -0,0 +1,37 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#endif + diff --git a/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c new file mode 100644 index 0000000000..d58ad2dfbc --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c @@ -0,0 +1,37 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#endif + diff --git a/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c b/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c new file mode 100644 index 0000000000..570898a3aa --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c @@ -0,0 +1,83 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + + if (!(Length)) + Endpoint_ClearOUT(); + + while (Length) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + + if (Endpoint_IsOUTReceived()) + { + while (Length && Endpoint_BytesInEndpoint()) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + } + + Endpoint_ClearOUT(); + } + } + + while (!(Endpoint_IsINReady())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE + +#endif diff --git a/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c b/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c new file mode 100644 index 0000000000..d1b5f7a066 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c @@ -0,0 +1,92 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + bool LastPacketFull = false; + + if (Length > USB_ControlRequest.wLength) + Length = USB_ControlRequest.wLength; + else if (!(Length)) + Endpoint_ClearIN(); + + while (Length || LastPacketFull) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + else if (Endpoint_IsOUTReceived()) + break; + + if (Endpoint_IsINReady()) + { + uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint(); + + while (Length && (BytesInEndpoint < USB_Device_ControlEndpointSize)) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInEndpoint++; + } + + LastPacketFull = (BytesInEndpoint == USB_Device_ControlEndpointSize); + Endpoint_ClearIN(); + } + } + + while (!(Endpoint_IsOUTReceived())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE + +#endif diff --git a/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c b/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c new file mode 100644 index 0000000000..ef9e8eaad1 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c @@ -0,0 +1,88 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint16_t BytesInTransfer = 0; + uint8_t ErrorCode; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + { + Length -= *BytesProcessed; + TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed); + } + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_ENDPOINT(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + #if !defined(INTERRUPT_CONTROL_ENDPOINT) + USB_USBTask(); + #endif + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_ENDPOINT +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE + +#endif diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c new file mode 100644 index 0000000000..52d44feada --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c @@ -0,0 +1,77 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#define __INCLUDE_FROM_USB_CONTROLLER_C +#include "../USBController.h" + +#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) +volatile uint8_t USB_CurrentMode = USB_MODE_None; +#endif + +#if !defined(USE_STATIC_OPTIONS) +volatile uint8_t USB_Options; +#endif + +void USB_Init( + #if defined(USB_CAN_BE_BOTH) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) + const uint8_t Options + #endif + ) +{ + // TODO +} + +void USB_Disable(void) +{ + // TODO +} + +void USB_ResetInterface(void) +{ + // TODO +} + +#if defined(USB_CAN_BE_DEVICE) +static void USB_Init_Device(void) +{ + // TODO +} +#endif diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h new file mode 100644 index 0000000000..8be4ed2e1a --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h @@ -0,0 +1,359 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Controller definitions for the AVR XMEGA microcontrollers. + * \copydetails Group_USBManagement_XMEGA + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USBManagement + * \defgroup Group_USBManagement_XMEGA USB Interface Management (XMEGA) + * \brief USB Controller definitions for the AVR XMEGA microcontrollers. + * + * Functions, macros, variables, enums and types related to the setup and management of the USB interface. + * + * @{ + */ + +#ifndef __USBCONTROLLER_XMEGA_H__ +#define __USBCONTROLLER_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../Events.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #include "../Device.h" + #include "../Endpoint.h" + #include "../DeviceStandardReq.h" + #include "../EndpointStream.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks and Defines: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if !defined(F_USB) + #error F_USB is not defined. You must define F_USB to the frequency of the unprescaled USB controller clock in your project makefile. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Controller Option Masks */ + //@{ + /** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be disabled and the AVR's VCC level used for the data pads. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_DISABLED (1 << 1) + + /** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be enabled to regulate the data pin voltages from the VBUS level down to a level within + * the range allowable by the USB standard. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_ENABLED (0 << 1) + + /** Manual PLL control option mask for \ref USB_Init(). This indicates to the library that the user application + * will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_MANUAL_PLL (1 << 2) + + /** Automatic PLL control option mask for \ref USB_Init(). This indicates to the library that the library should + * take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_AUTO_PLL (0 << 2) + //@} + + /** \name Endpoint/Pipe Type Masks */ + //@{ + /** Mask for a CONTROL type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_CONTROL 0x00 + + /** Mask for an ISOCHRONOUS type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_ISOCHRONOUS 0x01 + + /** Mask for a BULK type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_BULK 0x02 + + /** Mask for an INTERRUPT type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_INTERRUPT 0x03 + //@} + + #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of the USB data stream transfer functions + * (both control and standard) when in either device or host mode. If the next packet of a stream + * is not received or acknowledged within this time period, the stream function will fail. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_STREAM_TIMEOUT_MS 100 + #endif + + /* Inline Functions: */ + /** Determines if the VBUS line is currently high (i.e. the USB host is supplying power). + * + * \note This function is not available on some AVR models which do not support hardware VBUS monitoring. + * + * \return Boolean \c true if the VBUS line is currently detecting power from a host, \c false otherwise. + */ + static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_VBUS_GetStatus(void) + { + return 0; // TODO + } + + /** Detaches the device from the USB bus. This has the effect of removing the device from any + * attached host, ceasing USB communications. If no host is present, this prevents any host from + * enumerating the device once attached until \ref USB_Attach() is called. + */ + static inline void USB_Detach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Detach(void) + { + // TODO + } + + /** Attaches the device to the USB bus. This announces the device's presence to any attached + * USB host, starting the enumeration process. If no host is present, attaching the device + * will allow for enumeration once a host is connected to the device. + * + * This is inexplicably also required for proper operation while in host mode, to enable the + * attachment of a device to the host. This is despite the bit being located in the device-mode + * register and despite the datasheet making no mention of its requirement in host mode. + */ + static inline void USB_Attach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Attach(void) + { + // TODO + } + + /* Function Prototypes: */ + /** Main function to initialize and start the USB interface. Once active, the USB interface will + * allow for device connection to a host when in device mode, or for device enumeration while in + * host mode. + * + * As the USB library relies on interrupts for the device and host mode enumeration processes, + * the user must enable global interrupts before or shortly after this function is called. In + * device mode, interrupts must be enabled within 500ms of this function being called to ensure + * that the host does not time out whilst enumerating the device. In host mode, interrupts may be + * enabled at the application's leisure however enumeration will not begin of an attached device + * until after this has occurred. + * + * Calling this function when the USB interface is already initialized will cause a complete USB + * interface reset and re-enumeration. + * + * \param[in] Mode This is a mask indicating what mode the USB interface is to be initialized to, a value + * from the \ref USB_Modes_t enum. + * + * \param[in] Options Mask indicating the options which should be used when initializing the USB + * interface to control the USB interface's behaviour. This should be comprised of + * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the + * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device + * mode speed. + * + * \note To reduce the FLASH requirements of the library if only device or host mode is required, + * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY + * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler + * via the -D switch. If the mode is statically set, this parameter does not exist in the + * function prototype. + * \n\n + * + * \note To reduce the FLASH requirements of the library if only fixed settings are are required, + * the options may be set statically in the same manner as the mode (see the Mode parameter of + * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, + * defined to the appropriate options masks. When the options are statically set, this + * parameter does not exist in the function prototype. + * \n\n + * + * \note The mode parameter does not exist on devices where only one mode is possible, such as USB + * AVR models which only implement the USB device mode in hardware. + * + * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks. + */ + void USB_Init( + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + const uint8_t Options + #endif + ); + + /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO + * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface + * is restarted with the \ref USB_Init() function. + */ + void USB_Disable(void); + + /** Resets the interface, when already initialized. This will re-enumerate the device if already connected + * to a host, or re-enumerate an already attached device when in host mode. + */ + void USB_ResetInterface(void); + + /* Global Variables: */ + #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__) + /** Indicates the mode that the USB interface is currently initialized to, a value from the + * \ref USB_Modes_t enum. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + * \n\n + * + * \note When the controller is initialized into UID auto-detection mode, this variable will hold the + * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller + * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time + * options, or a limitation of the USB controller in the chosen device model) this will evaluate to + * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the + * USB interface is not initialized. + */ + extern volatile uint8_t USB_CurrentMode; + #elif defined(USB_DEVICE_ONLY) + #define USB_CurrentMode USB_MODE_Device + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() + * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern volatile uint8_t USB_Options; + #elif defined(USE_STATIC_OPTIONS) + #define USB_Options USE_STATIC_OPTIONS + #endif + + /* Enums: */ + /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the + * user application via \ref USB_CurrentMode. + */ + enum USB_Modes_t + { + USB_MODE_None = 0, /**< Indicates that the controller is currently not initialized in any specific USB mode. */ + USB_MODE_Device = 1, /**< Indicates that the controller is currently initialized in USB Device mode. */ + }; + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USB_CONTROLLER_C) + static void USB_Init_Device(void); + #endif + + /* Inline Functions: */ + static inline void USB_REG_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_REG_On(void) + { + // TODO + } + + static inline void USB_REG_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_REG_Off(void) + { + // TODO + } + + static inline void USB_CLK_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Freeze(void) + { + // TODO + } + + static inline void USB_CLK_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Unfreeze(void) + { + // TODO + } + + static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Enable(void) + { + // TODO + } + + static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Disable(void) + { + // TODO + } + + static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Reset(void) + { + // TODO + } + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c new file mode 100644 index 0000000000..cb80622567 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c @@ -0,0 +1,45 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBInterrupt.h" + +void USB_INT_DisableAllInterrupts(void) +{ + // TODO +} + +void USB_INT_ClearAllInterrupts(void) +{ + // TODO +} + +// TODO: USB ISR + diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h new file mode 100644 index 0000000000..6dcb0e67c3 --- /dev/null +++ b/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h @@ -0,0 +1,112 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Controller Interrupt definitions for the AVR XMEGA microcontrollers. + * + * This file contains definitions required for the correct handling of low level USB service routine interrupts + * from the USB controller. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBINTERRUPT_XMEGA_H__ +#define __USBINTERRUPT_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Enums: */ + enum USB_Interrupts_t + { + USB_INT_NONE = 0, // TODO + }; + + /* Inline Functions: */ + static inline void USB_INT_Enable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Enable(const uint8_t Interrupt) + { + // TODO + } + + static inline void USB_INT_Disable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Disable(const uint8_t Interrupt) + { + // TODO + } + + static inline void USB_INT_Clear(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Clear(const uint8_t Interrupt) + { + // TODO + } + + static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) + { + return false; // TODO + } + + static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) + { + return false; // TODO + } + + /* Includes: */ + #include "../USBMode.h" + #include "../Events.h" + #include "../USBController.h" + + /* Function Prototypes: */ + void USB_INT_ClearAllInterrupts(void); + void USB_INT_DisableAllInterrupts(void); + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt index 31c960101f..2a283380f7 100644 --- a/LUFA/ManPages/ChangeLog.txt +++ b/LUFA/ManPages/ChangeLog.txt @@ -26,6 +26,7 @@ * - Added new HID_Host_SetIdlePeriod() function to the HID Host Class driver * - Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device * - Added new USB_Host_GetDeviceStatus() function to the host standard request function set + * - Added AVR USB XMEGA architecture port (currently incomplete/experimental) * - Library Applications: * - Added RNDIS device mode to the Webserver project * - Added new incomplete AndroidAccessoryHost Host LowLevel demo @@ -49,6 +50,7 @@ * - Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required * - Altered the USB_Host_SetDeviceConfiguration() function to update the global Host state machine state and the new * USB_Host_ConfigurationNumber global as required + * - Added endian correcting code to the library USB class drivers for multiple architecture support * - Library Applications: * - Modified the Low Level and Class Driver AudioInput and AudioOutput demos to support multiple audio sample rates * - Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration diff --git a/LUFA/ManPages/DeviceSupport.txt b/LUFA/ManPages/DeviceSupport.txt index d8ac7ad26a..c248bbda24 100644 --- a/LUFA/ManPages/DeviceSupport.txt +++ b/LUFA/ManPages/DeviceSupport.txt @@ -92,5 +92,23 @@ * * Currently supported third-party boards (see \ref Group_BoardTypes for makefile BOARD constant names): * - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers) + * + * \section Sec_XMEGA_Support Atmel USB XMEGA AVR (XMEGA) + * Note: The XMEGA device support is currently experimental, and is included for preview purposes only. + * Currently supported XMEGA models: + * - ATXMEGA16A4U (USB Device Only) + * - ATXMEGA32A4U (USB Device Only) + * - ATXMEGA64A3U (USB Device Only) + * - ATXMEGA128A3U (USB Device Only) + * - ATXMEGA192A3U (USB Device Only) + * - ATXMEGA256A3U (USB Device Only) + * - ATXMEGA256A3BU (USB Device Only) + * - ATXMEGA128A1U (USB Device Only) + * + * Currently supported Atmel XMEGA boards (see \ref Group_BoardTypes): + * - None + * + * Currently supported third-party boards (see \ref Group_BoardTypes for makefile BOARD constant names): + * - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers) */