diff --git a/LUFA/DoxygenPages/BuildSystem.txt b/LUFA/DoxygenPages/BuildSystem.txt index 8a498a3355..21930eaf3b 100644 --- a/LUFA/DoxygenPages/BuildSystem.txt +++ b/LUFA/DoxygenPages/BuildSystem.txt @@ -320,7 +320,7 @@ * \section SSec_BuildModule_ATPROGRAM_Requirements Requirements * This module requires the atprogram.exe utility to be available in your system's PATH * variable. The atprogram.exe utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x - * inside the application install folder's "\avrdbg" subdirectory. + * inside the application install folder's "\atbackend" subdirectory. * * \section SSec_BuildModule_ATPROGRAM_Targets Targets * @@ -789,7 +789,7 @@ * * The SOURCES LUFA build system module, providing variables listing the various LUFA source files * required to be build by a project for a given LUFA module. This module gives a way to reference - * LUFA source files symbollically, so that changes to the library structure do not break the library + * LUFA source files symbolically, so that changes to the library structure do not break the library * makefile. * * To use this module in your application makefile, add the following code: @@ -909,7 +909,7 @@ * * Error "Makefile {X} option must be Y or N" shown when compiling. * The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No"). - * This configuration option is required to be one of the aformentioned boolean values, and other values are invalid. Set this option to either Y or N and try again. + * This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again. * * * Error "Unknown input source file formats: {X}" shown when compiling. @@ -957,7 +957,7 @@ * * * Error "unknown MCU '{X}' specified" shown when compiling. - * The specified micocontroller device model name set in the user application's makefile as the MCU parameter is incorrect, or unsupported by the + * The specified microcontroller device model name set in the user application's makefile as the MCU parameter is incorrect, or unsupported by the * version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support. * * diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt index 26eff54af1..10627d468c 100644 --- a/LUFA/DoxygenPages/ChangeLog.txt +++ b/LUFA/DoxygenPages/ChangeLog.txt @@ -159,7 +159,7 @@ * - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid) * - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin) * - Fixed inverted LED logic in the OLIMEX162 board LED driver - * - Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock) + * - Fixed incorrect response to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock) * - Fixed inverted LED logic in the USB2AX board LED driver * - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by * the stack (thanks to Jonathan Hudgins) @@ -211,7 +211,7 @@ * - Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached device can be recovered from automatically without * having to reset the Mass Storage interface * - USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors) - * - Reordered board name definition indexes so that a mispelled BOARD compile option will default to BOARD_USER rather than BOARD_USBKEY + * - Reordered board name definition indexes so that a misspelled BOARD compile option will default to BOARD_USER rather than BOARD_USBKEY * - Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage * - All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance * - Library Applications: @@ -758,7 +758,7 @@ * - Added new RNDIS Ethernet Host ClassDriver demo * - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device * - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair) - * - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different dataflash used + * - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different Dataflash used * on the first revision boards compared to the one mounted on later revisions * - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype * - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values @@ -1076,7 +1076,7 @@ * Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe * bank management API * - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG) - * - Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity + * - Updated library Doxygen documentation, added groups, changed documentation macro functions to real functions for clarity * - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity * - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway * - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream @@ -1292,7 +1292,7 @@ * - All HID demos now pass the USB.org automated HID compliance tests * - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems * - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks - * - Mass Storage demo dataflash management routines changed to use the endpoint stream functions + * - Mass Storage demo Dataflash management routines changed to use the endpoint stream functions * - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file * - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes * are reflected in the hardware (change was previously lost) @@ -1348,7 +1348,7 @@ * size bits not required for the routines (improves compatibility with devices) * - Fixed AudioInput demo - now correctly sends sampled audio to the host PC * - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes - * - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes + * - Shrunk round-robin scheduler code slightly via the use of struct pointers rather than array indexes * - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser * - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder * - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler @@ -1490,7 +1490,7 @@ * - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and * placing board drivers in {Application Directory}/Board/ * - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power - * - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY + * - Joystick defines are now in sync with the schematics - orientation will be rotated for the USBKEY * - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register * - Fixed data transfers to devices when in host mode * - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to @@ -1525,7 +1525,7 @@ * - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer * pointer is passed * - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables - * dependant on size of memory parameters passed in via the user project's makefile + * dependent on size of memory parameters passed in via the user project's makefile * - Fixed incorrect device reset routine being called in USBTask * - Devices which do not connect within the standard 300mS are now supported * - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being diff --git a/LUFA/DoxygenPages/ConfiguringApps.txt b/LUFA/DoxygenPages/ConfiguringApps.txt index 171198e4e7..fe0b7caacf 100644 --- a/LUFA/DoxygenPages/ConfiguringApps.txt +++ b/LUFA/DoxygenPages/ConfiguringApps.txt @@ -91,7 +91,7 @@ * \subsection SSec_ConfiguringApps_LUFA_PATH The LUFA_PATH Parameter * As each LUFA program requires the LUFA library source code to compile correctly, the application must know where the LUFA library is located. This * value specifies the path to the LUFA library core. This path may be relative or absolute, however note than even under Windows based systems the - * forward-slash (/) path seperator must be used. + * forward-slash (/) path separator must be used. * * \subsection SSec_ConfiguringApps_CC_FLAGS The CC_FLAGS Parameter * This parameter lists the compiler flags passed to the C/C++ compiler, the assembler and the linker. These are used as-is directly to GCC and thus diff --git a/LUFA/DoxygenPages/LUFAPoweredProjects.txt b/LUFA/DoxygenPages/LUFAPoweredProjects.txt index 20cb164271..ff3b3f42fe 100644 --- a/LUFA/DoxygenPages/LUFAPoweredProjects.txt +++ b/LUFA/DoxygenPages/LUFAPoweredProjects.txt @@ -20,7 +20,7 @@ * * \li AVR-USB-162, a USBKEY-like development board for the AT90USB162: http://olimex.com/dev/avr-usb-162.html * \li Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/wiki/benito - * \li Duce, the sucessor to the Benito #7: http://dorkbotpdx.org/wiki/duce + * \li Duce, the successor to the Benito #7: http://dorkbotpdx.org/wiki/duce * \li JM-DB-U2, an ATMEGA32U2 development board: http://u2.mattair.net/index.html * \li Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/ * \li Microsin AVR-USB162 breakout board, a DIY AT90USB162 development board: http://microsin.ru/content/view/685/44/ @@ -51,6 +51,7 @@ * \li Bus Ninja, an AVR clone of the popular BusPirate project: http://blog.hodgepig.org/busninja/ * \li CAMTRIG, a remote Camera Trigger device: http://code.astraw.com/projects/motmot/camtrig * \li CD Driver Emulator Dongle for ISO Files: http://cdemu.blogspot.com/ + * \li ChipWhisperer, a signal capture device: https://www.assembla.com/spaces/chipwhisperer/wiki/ChipWhisperer_Rev2_Capture_Hardware * \li ClockTamer, a configurable clock generator: http://code.google.com/p/clock-tamer/ * \li Collection of alternative Arduino Uno firmwares: http://hunt.net.nz/users/darran/ * \li Computer controlled LED matrix (Russian): http://we.easyelectronics.ru/AVR/nebolshoy-primer-s-lufa-hidapi.html @@ -104,6 +105,7 @@ * \li Opendous-JTAG, an open source ARM JTAG debugger: http://code.google.com/p/opendous-jtag/ * \li Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/ * \li Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm + * \li Password keyring: http://owlsan.blogspot.no/2013/06/keyring-project-version-10.html * \li PPM signal generator over USB: https://github.com/G33KatWork/USBPPM * \li Programmable keyboard controller: http://41j.com/blog/2011/10/a-programmable-keyboard-controller/ * \li Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/ @@ -144,7 +146,7 @@ * \li Userial, a USB to Serial converter with SPI, I2C and other protocols: http://www.tty1.net/userial/ * \li Wii Classic Controller to USB converter: https://github.com/crazyiop/wii-classic-2-usb * \li Wireless MIDI Guitar system: http://www.ise.pw.edu.pl/~wzab/wireless_guitar_system/ - * \li XBOX 360 Statup Sound Changer: http://www.homebrew-connection.org/change-your-xbox-360-startup-sounds-yourself/ + * \li XBOX 360 Startup Sound Changer: http://www.homebrew-connection.org/change-your-xbox-360-startup-sounds-yourself/ * \li Xnormidi, a C MIDI library: http://x37v.info/projects/xnormidi * \li XUM1541, a Commodore 64 floppy drive to USB adapter: http://www.root.org/~nate/c64/xum1541/ * \li Zeus, a touch screen computer for music manipulation: http://www.benbengler.com/developments_zeus.html