Keyboard: Duck Jetfire QMK Support (#3752)

* Initial Commit

Port from xauser's jetfire code. Does not compile yet

* fix up keymap from uint8 to uin16

* update rules file to contain custom matrix

* Good stopping point

Still lots of compile errors but I'm getting there.

* fix a few more compile errors

* move a few functions around to help with compiling

* Finally got it all to compile

* Get rid of that old KEYMAP macro

* edit readme

* Put my name everywhere and some minor code clean ups

* start to remove that kc nonsense

* fix keymap compilation issues

* add reset key info

* better human readable formatting

* match the duck default layout

* add confgurator support

* clarify reset key

* might be a good idea to use the correct pin

* get the riight keycode for RGB

* include an ALL layout

* I tried to fix the formatting....sigh

* add functons to ensure Configurator compile-ability

* move jetfire to duck directory

* Moved and renamed things as per Drashna's PR comments as his back was hurting as he reviewed this
pull/3756/head
MechMerlin 6 years ago committed by Drashna Jaelre
parent a68057852b
commit e16b39f0c2

@ -0,0 +1,129 @@
/*
Copyright 2016 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/interrupt.h>
#include <avr/io.h>
#include <stdbool.h>
#include <util/delay.h>
#include <stdint.h>
#include "backlight_led.h"
#include "quantum.h"
// #include "led.h"
#define T1H 900
#define T1L 600
#define T0H 400
#define T0L 900
#define RES 6000
#define NS_PER_SEC (1000000000L)
#define CYCLES_PER_SEC (F_CPU)
#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
void send_bit_d4(bool bitVal)
{
if(bitVal) {
asm volatile (
"sbi %[port], %[bit] \n\t"
".rept %[onCycles] \n\t"
"nop \n\t"
".endr \n\t"
"cbi %[port], %[bit] \n\t"
".rept %[offCycles] \n\t"
"nop \n\t"
".endr \n\t"
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (4),
[onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
[offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
} else {
asm volatile (
"sbi %[port], %[bit] \n\t"
".rept %[onCycles] \n\t"
"nop \n\t"
".endr \n\t"
"cbi %[port], %[bit] \n\t"
".rept %[offCycles] \n\t"
"nop \n\t"
".endr \n\t"
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (4),
[onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
[offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
}
}
void send_bit_d6(bool bitVal)
{
if(bitVal) {
asm volatile (
"sbi %[port], %[bit] \n\t"
".rept %[onCycles] \n\t"
"nop \n\t"
".endr \n\t"
"cbi %[port], %[bit] \n\t"
".rept %[offCycles] \n\t"
"nop \n\t"
".endr \n\t"
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (6),
[onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
[offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
} else {
asm volatile (
"sbi %[port], %[bit] \n\t"
".rept %[onCycles] \n\t"
"nop \n\t"
".endr \n\t"
"cbi %[port], %[bit] \n\t"
".rept %[offCycles] \n\t"
"nop \n\t"
".endr \n\t"
::
[port] "I" (_SFR_IO_ADDR(PORTD)),
[bit] "I" (6),
[onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
[offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
}
}
void show(void)
{
_delay_us((RES / 1000UL) + 1);
}
void send_value(uint8_t byte, enum Device device)
{
for(uint8_t b = 0; b < 8; b++) {
if(device == Device_STATELED) {
send_bit_d4(byte & 0b10000000);
}
if(device == Device_PCBRGB) {
send_bit_d6(byte & 0b10000000);
}
byte <<= 1;
}
}
void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device)
{
send_value(g, device);
send_value(r, device);
send_value(b, device);
}

@ -0,0 +1,18 @@
#ifndef BACKLIGHT_LED_H
#define BACKLIGHT_LED_H
enum Device {
Device_PCBRGB,
Device_STATELED
};
void backlight_init_ports(void);
void backlight_set_state(bool cfg[7]);
void backlight_update_state(void);
void backlight_toggle_rgb(bool enabled);
void backlight_set_rgb(uint8_t cfg[17][3]);
void backlight_set(uint8_t level);
void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device);
void show(void);
#endif

@ -0,0 +1,200 @@
/*
Copyright 2018 MechMerlin
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6050
#define DEVICE_VER 0x0104
#define MANUFACTURER Duck
#define PRODUCT Jetfire
#define DESCRIPTION A custom keyboard
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 20
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_LEVELS 1
#define RGB_DI_PIN D6
// #ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 23
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
/*
* HD44780 LCD Display Configuration
*/
/*
#define LCD_LINES 2 //< number of visible lines of the display
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
#if LCD_IO_MODE
#define LCD_PORT PORTB //< port for the LCD lines
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
#define LCD_RS_PORT LCD_PORT //< port for RS line
#define LCD_RS_PIN 3 //< pin for RS line
#define LCD_RW_PORT LCD_PORT //< port for RW line
#define LCD_RW_PIN 2 //< pin for RW line
#define LCD_E_PORT LCD_PORT //< port for Enable line
#define LCD_E_PIN 1 //< pin for Enable line
#endif
*/

@ -0,0 +1,16 @@
{
"keyboard_name": "Jetfire",
"url": "",
"maintainer": "qmk",
"width": 20.5,
"height": 6.5,
"layouts": {
"LAYOUT_all": {
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"x":15.25, "y":0}, {"label":"PrtSc", "x":16.5, "y":0}, {"label":"Scroll Lock", "x":17.5, "y":0}, {"label":"Pause", "x":18.5, "y":0}, {"x":19.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Num Lock", "x":16.5, "y":1.25}, {"label":"/", "x":17.5, "y":1.25}, {"label":"*", "x":18.5, "y":1.25}, {"label":"-", "x":19.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"7", "x":16.5, "y":2.25}, {"label":"8", "x":17.5, "y":2.25}, {"label":"9", "x":18.5, "y":2.25}, {"label":"+", "x":19.5, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":16.5, "y":3.25}, {"label":"5", "x":17.5, "y":3.25}, {"label":"6", "x":18.5, "y":3.25}, {"x":19.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"label":"1", "x":16.5, "y":4.25}, {"label":"2", "x":17.5, "y":4.25}, {"label":"3", "x":18.5, "y":4.25}, {"label":"Enter", "x":19.5, "y":4.25}, {"label":"\u2191", "x":15.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25}, {"label":"Menu", "x":12, "y":5.25}, {"x":13, "y":5.25}, {"label":"0", "x":17.5, "y":5.25}, {"label":".", "x":18.5, "y":5.25}, {"x":19.5, "y":5.25}, {"label":"\u2190", "x":14.25, "y":5.5}, {"label":"\u2193", "x":15.25, "y":5.5}, {"label":"\u2192", "x":16.25, "y":5.5}]
},
"LAYOUT": {
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"x":15.25, "y":0}, {"label":"PrtSc", "x":16.5, "y":0}, {"label":"Scroll Lock", "x":17.5, "y":0}, {"label":"Pause", "x":18.5, "y":0}, {"x":19.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Num Lock", "x":16.5, "y":1.25}, {"label":"/", "x":17.5, "y":1.25}, {"label":"*", "x":18.5, "y":1.25}, {"label":"-", "x":19.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"7", "x":16.5, "y":2.25}, {"label":"8", "x":17.5, "y":2.25}, {"label":"9", "x":18.5, "y":2.25}, {"label":"+", "x":19.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":16.5, "y":3.25}, {"label":"5", "x":17.5, "y":3.25}, {"label":"6", "x":18.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"1", "x":16.5, "y":4.25}, {"label":"2", "x":17.5, "y":4.25}, {"label":"3", "x":18.5, "y":4.25}, {"label":"Enter", "x":19.5, "y":4.25, "h":2}, {"label":"\u2191", "x":15.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.5}, {"label":"0", "x":17.5, "y":5.25}, {"label":".", "x":18.5, "y":5.25}, {"label":"\u2190", "x":14.25, "y":5.5}, {"label":"\u2193", "x":15.25, "y":5.5}, {"label":"\u2192", "x":16.25, "y":5.5}]
}
}
}

@ -0,0 +1,171 @@
/* Copyright 2018 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "jetfire.h"
#include "backlight_led.h"
enum backlight_level {
BACKLIGHT_ALPHA = 0b0000001,
BACKLIGHT_MOD = 0b0000010,
BACKLIGHT_FROW = 0b0000100,
BACKLIGHT_NUMBLOCK = 0b0001000,
BACKLIGHT_RGB = 0b0010000,
BACKLIGHT_SWITCH = 0b0001111
};
enum StateLed {
STATE_LED_SCROLL_LOCK,
STATE_LED_CAPS_LOCK,
STATE_LED_NUM_LOCK,
STATE_LED_LAYER_0,
STATE_LED_LAYER_1,
STATE_LED_LAYER_2,
STATE_LED_LAYER_3,
STATE_LED_LAYER_4
};
uint8_t backlight_rgb_r = 255;
uint8_t backlight_rgb_g = 0;
uint8_t backlight_rgb_b = 0;
uint8_t backlight_state_led = 1<<STATE_LED_LAYER_0;
void backlight_toggle_rgb(bool enabled)
{
if(enabled) {
uint8_t rgb[RGBLED_NUM][3] = {
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
{backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}
};
backlight_set_rgb(rgb);
} else {
uint8_t rgb[RGBLED_NUM][3] = {
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0},
{0, 0, 0}
};
backlight_set_rgb(rgb);
}
}
void backlight_set_rgb(uint8_t cfg[RGBLED_NUM][3])
{
cli();
for(uint8_t i = 0; i < RGBLED_NUM; ++i) {
send_color(cfg[i][0], cfg[i][1], cfg[i][2], Device_PCBRGB);
}
sei();
show();
}
void backlight_set(uint8_t level)
{
level & BACKLIGHT_ALPHA ? (PORTB |= 0b00000010) : (PORTB &= ~0b00000010);
level & BACKLIGHT_MOD ? (PORTB |= 0b00000100) : (PORTB &= ~0b00000100);
level & BACKLIGHT_FROW ? (PORTB |= 0b00001000) : (PORTB &= ~0b00001000);
level & BACKLIGHT_NUMBLOCK ? (PORTE |= 0b01000000) : (PORTE &= ~0b01000000);
backlight_toggle_rgb(level & BACKLIGHT_RGB);
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void backlight_update_state()
{
cli();
send_color(backlight_state_led & (1<<STATE_LED_SCROLL_LOCK) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_CAPS_LOCK) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_NUM_LOCK) ? 255 : 0,
Device_STATELED);
send_color(backlight_state_led & (1<<STATE_LED_LAYER_1) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_LAYER_2) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_LAYER_0) ? 255 : 0,
Device_STATELED);
send_color(backlight_state_led & (1<<STATE_LED_LAYER_4) ? 255 : 0,
backlight_state_led & (1<<STATE_LED_LAYER_3) ? 255 : 0,
0,
Device_STATELED);
sei();
show();
}
void led_set_kb(uint8_t usb_led)
{
if(usb_led & (1<<USB_LED_CAPS_LOCK)) {
backlight_state_led |= 1<<STATE_LED_CAPS_LOCK;
} else {
backlight_state_led &= ~(1<<STATE_LED_CAPS_LOCK);
}
if(usb_led & (1<<USB_LED_SCROLL_LOCK)) {
backlight_state_led |= 1<<STATE_LED_SCROLL_LOCK;
} else {
backlight_state_led &= ~(1<<STATE_LED_SCROLL_LOCK);
}
if(usb_led & (1<<USB_LED_NUM_LOCK)) {
backlight_state_led |= 1<<STATE_LED_NUM_LOCK;
} else {
backlight_state_led &= ~(1<<STATE_LED_NUM_LOCK);
}
backlight_update_state();
}

@ -0,0 +1,60 @@
/* Copyright 2018 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef JETFIRE_H
#define JETFIRE_H
#include "quantum.h"
// This a shortcut to help you visually see your layout.
// The following is an example using the Planck MIT layout
// The first section contains all of the arguments representing the physical
// layout of the board and position of the keys
// The second converts the arguments into a two-dimensional array which
// represents the switch matrix.
#define LAYOUT_all( \
K5A, K5C, K5D, K5E, K5F, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T, \
K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, K4S, K4T, \
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3O, K3P, K3Q, K3R, K3S, K3T, \
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2O, K2Q, K2R, K2S, K2T, \
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1M, K1N, K1O, K1P, K1Q, K1R, K1S, K1T, \
K0A, K0B, K0C, K0I, K0L, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, K0T \
) { \
{ K5A, KC_NO, K5C, K5D, K5E, K5F, KC_NO, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T }, \
{ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, K4S, K4T }, \
{ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, KC_NO, K3O, K3P, K3Q, K3R, K3S, K3T }, \
{ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO, KC_NO, K2O, KC_NO, K2Q, K2R, K2S, K2T }, \
{ K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, KC_NO, K1M, K1N, K1O, K1P, K1Q, K1R, K1S, K1T }, \
{ K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO, K0L, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, K0T } \
}
#define LAYOUT( \
K5A, K5C, K5D, K5E, K5F, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T, \
K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4O, K4P, K4Q, K4R, K4S, K4T, \
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3O, K3P, K3Q, K3R, K3S, K3T, \
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2O, K2Q, K2R, K2S, \
K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1M, K1N, K1P, K1Q, K1R, K1S, K1T, \
K0A, K0B, K0C, K0I, K0M, K0N, K0O, K0P, K0Q, K0R, K0S \
) { \
{ K5A, KC_NO, K5C, K5D, K5E, K5F, KC_NO, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T }, \
{ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, KC_NO, K4O, K4P, K4Q, K4R, K4S, K4T }, \
{ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, KC_NO, K3O, K3P, K3Q, K3R, K3S, K3T }, \
{ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO, KC_NO, K2O, KC_NO, K2Q, K2R, K2S, KC_NO }, \
{ K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, KC_NO, K1M, K1N, KC_NO, K1P, K1Q, K1R, K1S, K1T }, \
{ K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO,KC_NO, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, KC_NO } \
}
#endif

@ -0,0 +1,19 @@
/* Copyright 2018 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
// place overrides here

@ -0,0 +1,59 @@
/* Copyright 2018 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// layer 0: qwerty
[0] = LAYOUT(\
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_MOD, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_COMM),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
}

@ -0,0 +1 @@
# The default keymap for jetfire

@ -0,0 +1,277 @@
/*
Copyright 2016 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
static uint8_t debouncing = DEBOUNCING_DELAY;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static uint8_t read_rows(uint8_t col);
static void init_ports(void);
static void unselect_cols(void);
static void select_col(uint8_t col);
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void backlight_init_ports(void)
{
DDRD |= 0b01010000;
PORTD &= 0b10101111;
DDRB |= 0b00001110;
PORTB &= 0b11110001;
DDRE |= 0b01000000;
PORTE &= 0b10111111;
}
void matrix_init(void)
{
backlight_init_ports();
unselect_cols();
init_ports();
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
}
uint8_t matrix_scan(void)
{
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
select_col(col);
_delay_us(3);
uint8_t rows = read_rows(col);
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
bool curr_bit = rows & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
if (debouncing) {
dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
}
debouncing = DEBOUNCING_DELAY;
}
}
unselect_cols();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop32(matrix[i]);
}
return count;
}
static void init_ports(void)
{
// Rows are inputs (inputs are 0)
DDRD &= 0b11010000;
DDRB &= 0b01111111;
DDRE &= 0b11111011;
// Columns are outputs (outputs are high)
DDRF |= 0b00000011;
DDRC |= 0b11000000;
DDRB |= 0b01110001;
DDRD |= 0b10000000;
}
static uint8_t read_rows(uint8_t col)
{
if(col == 15) {
return (PINE&(1<<2) ? 0 : (1<<0)) |
(PIND&(1<<0) ? (1<<1) : 0) |
(PIND&(1<<1) ? (1<<2) : 0) |
(PIND&(1<<2) ? (1<<3) : 0) |
(PIND&(1<<3) ? (1<<4) : 0) |
(PIND&(1<<5) ? (1<<5) : 0);
} else {
return (PINB&(1<<7) ? (1<<0) : 0) |
(PIND&(1<<0) ? (1<<1) : 0) |
(PIND&(1<<1) ? (1<<2) : 0) |
(PIND&(1<<2) ? (1<<3) : 0) |
(PIND&(1<<3) ? (1<<4) : 0) |
(PIND&(1<<5) ? (1<<5) : 0);
}
}
static void unselect_cols(void)
{
PORTF &= 0b11111100;
PORTC &= 0b00111111;
PORTB &= 0b10001110;
PORTD &= 0b01111111;
}
static void select_col(uint8_t col)
{
switch (col) {
case 0:
PORTC |= 0b01000000;
break;
case 1:
PORTC |= 0b01000000;
PORTF |= 0b00000001;
break;
case 2:
PORTC |= 0b01000000;
PORTF |= 0b00000010;
break;
case 3:
PORTC |= 0b01000000;
PORTF |= 0b00000011;
break;
case 4:
PORTC |= 0b11000000;
break;
case 5:
PORTC |= 0b11000000;
PORTF |= 0b00000001;
break;
case 6:
PORTC |= 0b11000000;
PORTF |= 0b00000010;
break;
case 7:
PORTC |= 0b11000000;
PORTF |= 0b00000011;
break;
case 8:
PORTB |= 0b01000000;
break;
case 9:
PORTB |= 0b01000000;
PORTF |= 0b00000001;
break;
case 10:
PORTB |= 0b01000000;
PORTF |= 0b00000010;
break;
case 11:
PORTB |= 0b01000000;
PORTF |= 0b00000011;
break;
case 12:
PORTB |= 0b01000000;
PORTC |= 0b10000000;
break;
case 13:
PORTB |= 0b01000000;
PORTF |= 0b00000001;
PORTC |= 0b10000000;
break;
case 14:
PORTB |= 0b01000000;
PORTF |= 0b00000010;
PORTC |= 0b10000000;
break;
case 15:
PORTB |= 0b01000000;
PORTF |= 0b00000011;
PORTC |= 0b10000000;
break;
case 16:
PORTB |= 0b00100000;
break;
case 17:
PORTB |= 0b00010000;
break;
case 18:
PORTD |= 0b10000000;
break;
case 19:
PORTB |= 0b00000001;
break;
}
}

@ -0,0 +1,18 @@
# Jetfire
![jetfire](imgur.com image replace me!)
The Duck Jetfire is a hybrid full size and 1800 layout keyboard that went on
Group Buy in November 2017.
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
Hardware Supported: Duck Jetfire PCB
Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=92708.0)
To get into bootloader mode, hold the top top most key above the 2 navigation keys while connecting the USB cable.
Make example for this keyboard (after setting up your build environment):
make jetfire:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

@ -0,0 +1,74 @@
# MCU name
#MCU = at90usb1286
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
CUSTOM_MATRIX = yes
SRC += backlight_led.c \
matrix.c

@ -0,0 +1,16 @@
# Duck Keyboards
[Duck](http://duck0113.tistory.com/) is a popular Korean custom keyboard designer.
Duck boards can only be bought new during a Group Buy and are commonly on a first come, first serve basis.
**QMK is not the official firmware for Duck Keyboards.**
For the official firmware, please use [OTD](http://kbdlab.co.kr/index.php?document_srl=100301&mid=board_sw).
## QMK Powered Duck Boards
Eagle V2
Jetfire V1
Lightsaver V3
Octagon V1
Octagon V2
Viper V2
Loading…
Cancel
Save