diff --git a/Projects/AVRISP-MKII/AVRISP.txt b/Projects/AVRISP-MKII/AVRISP.txt
index 8ea8c8dac1..9bed59e566 100644
--- a/Projects/AVRISP-MKII/AVRISP.txt
+++ b/Projects/AVRISP-MKII/AVRISP.txt
@@ -109,7 +109,7 @@
*
*
* 1 Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only \n
- * 2 See \ref SSec_Options section
+ * 2 See AUX line related tokens in the \ref SSec_Options section
*
* \section Sec_PDI PDI Connections
* Connections to the device for PDI programming1 (when enabled):
@@ -153,7 +153,8 @@
*
*
* 1 When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
- * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.
+ * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK. \n
+ * 2 See AUX line related tokens in the \ref SSec_Options section
*
* \section Sec_TPI TPI Connections
* Connections to the device for TPI programming1 (when enabled):
@@ -197,7 +198,8 @@
*
*
* 1 When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
- * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.
+ * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK. \n
+ * 2 See AUX line related tokens in the \ref SSec_Options section
*
* \section SSec_Options Project Options
*
@@ -210,27 +212,29 @@
* | Description: |
*
*
- * | RESET_LINE_PORT |
+ * AUX_LINE_PORT |
* Makefile CDEFS |
- * PORT register for the programmer's target RESET line. Ignored when compiled for the XPLAIN board. |
+ * PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols,
+ * but is generally used for the target's /RESET line. Ignored when compiled for the XPLAIN board. |
*
*
- * | RESET_LINE_PIN |
+ * AUX_LINE_PIN |
* Makefile CDEFS |
- * PIN register for the programmer's target RESET line. Ignored when compiled for the XPLAIN board. |
+ * PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols,
+ * but is generally used for the target's /RESET line. Ignored when compiled for the XPLAIN board. |
*
*
- * | RESET_LINE_DDR |
+ * AUX_LINE_DDR |
* Makefile CDEFS |
- * DDR register for the programmer's target RESET line. Ignored when compiled for the XPLAIN board. |
+ * DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols,
+ * but is generally used for the target's /RESET line. Ignored when compiled for the XPLAIN board. |
*
*
- * | RESET_LINE_MASK |
+ * AUX_LINE_MASK |
* Makefile CDEFS |
- * Mask for the programmer's target RESET line on the chosen port. Must not be the AVR's /SS pin, as the
- * target pins are tri-stated when not in use, and low signals on the /SS pin will force SPI slave mode when the
- * pin is configured as an input. When in PDI programming mode, this is the target clock pin.
- * Ignored when compiled for the XPLAIN board. |
+ * Mask for the programmer's AUX target line. The use of this line varies between the programming protocols,
+ * but is generally used for the target's /RESET line. Must not be the AVR's /SS pin. Ignored when
+ * compiled for the XPLAIN board. |
*
*
* | VTARGET_ADC_CHANNEL |
@@ -252,7 +256,7 @@
* Makefile CDEFS |
* Define to force the PDI and TPI protocols (when enabled) to use the much faster hardware USART instead of bit-banging
* to match the official AVRISP pinout. This breaks pinout compatibility with the official AVRISP MKII (and requires
- * seperate ISP and PDI/TPI programming headers) but increases programming speed dramatically.
+ * seperate ISP, PDI, and TPI programming headers) but increases programming speed dramatically.
* Ignored when compiled for the XPLAIN board. |
*
*
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
index ebaf2f3e56..1bd688701b 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
@@ -84,15 +84,15 @@ void ISPTarget_ChangeTargetResetLine(const bool ResetTarget)
{
if (ResetTarget)
{
- RESET_LINE_DDR |= RESET_LINE_MASK;
+ AUX_LINE_DDR |= AUX_LINE_MASK;
if (!(V2Params_GetParameterValue(PARAM_RESET_POLARITY)))
- RESET_LINE_PORT |= RESET_LINE_MASK;
+ AUX_LINE_PORT |= AUX_LINE_MASK;
}
else
{
- RESET_LINE_DDR &= ~RESET_LINE_MASK;
- RESET_LINE_PORT &= ~RESET_LINE_MASK;
+ AUX_LINE_DDR &= ~AUX_LINE_MASK;
+ AUX_LINE_PORT &= ~AUX_LINE_MASK;
}
}
@@ -144,7 +144,7 @@ uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode, const uint1
}
/** Waits until the target has completed the last operation, by continuously polling the device's
- * BUSY flag until it is cleared, or until the \ref TARGET_BUSY_TIMEOUT_MS timeout period has expired.
+ * BUSY flag until it is cleared, or until the command timeout period has expired.
*
* \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT otherwise
*/
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index def34991ff..856b489039 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -189,8 +189,8 @@ void XPROGTarget_EnableTargetTPI(void)
IsSending = false;
/* Set /RESET line low for at least 90ns to enable TPI functionality */
- RESET_LINE_DDR |= RESET_LINE_MASK;
- RESET_LINE_PORT &= ~RESET_LINE_MASK;
+ AUX_LINE_DDR |= AUX_LINE_MASK;
+ AUX_LINE_PORT &= ~AUX_LINE_MASK;
asm volatile ("NOP"::);
asm volatile ("NOP"::);
@@ -269,8 +269,8 @@ void XPROGTarget_DisableTargetTPI(void)
#endif
/* Tristate target /RESET line */
- RESET_LINE_DDR &= ~RESET_LINE_MASK;
- RESET_LINE_PORT &= ~RESET_LINE_MASK;
+ AUX_LINE_DDR &= ~AUX_LINE_MASK;
+ AUX_LINE_PORT &= ~AUX_LINE_MASK;
}
/** Sends a byte via the USART.
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
index f4c3b7b1d3..3bbf454bef 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
@@ -63,10 +63,10 @@
#define BITBANG_PDIDATA_PIN PINB
#define BITBANG_PDIDATA_MASK (1 << 3)
- #define BITBANG_PDICLOCK_PORT RESET_LINE_PORT
- #define BITBANG_PDICLOCK_DDR RESET_LINE_DDR
- #define BITBANG_PDICLOCK_PIN RESET_LINE_PIN
- #define BITBANG_PDICLOCK_MASK RESET_LINE_MASK
+ #define BITBANG_PDICLOCK_PORT AUX_LINE_PORT
+ #define BITBANG_PDICLOCK_DDR AUX_LINE_DDR
+ #define BITBANG_PDICLOCK_PIN AUX_LINE_PIN
+ #define BITBANG_PDICLOCK_MASK AUX_LINE_MASK
#define BITBANG_TPIDATA_PORT PORTB
#define BITBANG_TPIDATA_DDR DDRB
diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index f5bb5b7123..a3f1368387 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -191,10 +191,10 @@ CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
-CDEFS += -DRESET_LINE_PORT=PORTB
-CDEFS += -DRESET_LINE_PIN=PINB
-CDEFS += -DRESET_LINE_DDR=DDRB
-CDEFS += -DRESET_LINE_MASK="(1 << 4)"
+CDEFS += -DAUX_LINE_PORT=PORTB
+CDEFS += -DAUX_LINE_PIN=PINB
+CDEFS += -DAUX_LINE_DDR=DDRB
+CDEFS += -DAUX_LINE_MASK="(1 << 4)"
CDEFS += -DVTARGET_ADC_CHANNEL=2
CDEFS += -DENABLE_ISP_PROTOCOL
CDEFS += -DENABLE_XPROG_PROTOCOL