add do60 support

pull/2104/head
Unknown 7 years ago committed by Jack Humbert
parent bba871df2f
commit e3b3c1ef82

@ -0,0 +1,82 @@
/*
Copyright 2012 Doyu Studio <sy_yang@doyustudio.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Shopkey by Doyu Studio
#define PRODUCT Do60
#define DESCRIPTION Do60 Keyboard PCB by Doyu Studio
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3, B0 }
#define UNUSED_PINS
/* Backlight Setup */
#define BACKLIGHT_PIN F4
#define BACKLIGHT_LEVELS 6
//#define BACKLIGHT_BREATHING
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* RGB Underglow
* F5 PIN for DO60's pre-soldered WS2812 LEDs
*/
#define RGB_DI_PIN F5
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 20 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 15
#define RGBLIGHT_VAL_STEP 15
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#define TAPPING_TERM 200
#endif

@ -0,0 +1,19 @@
#include "do60.h"
extern inline void do60_caps_led_on(void);
extern inline void do60_bl_led_on(void);
extern inline void do60_caps_led_off(void);
extern inline void do60_bl_led_off(void);
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
do60_caps_led_on();
} else {
do60_caps_led_off();
}
led_set_user(usb_led);
}

@ -0,0 +1,41 @@
#ifndef DO60_H
#define DO60_H
#include "quantum.h"
#include "led.h"
/* DO60 LEDs
* GPIO pads
* 0 F7 not connected
* 1 F6 RGB PWM Underglow
* 2 F5 Backlight LED
* 3 F4 not connected
* B2 Capslock LED
* B0 not connected
*/
inline void do60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
inline void do60_bl_led_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
inline void do60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
inline void do60_bl_led_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
/* Do60 Keymap Definition Macro */
#define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
K40, K41, K42, K45, K46, K47, K4A, K4B, K4C, K4D, K4E \
) { \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
{ K40, K41, K42, KC_NO,KC_NO,K45, K46, K47, KC_NO,KC_NO,K4A, K4B, K4C, K4D, K4E } \
}
#endif

@ -0,0 +1,47 @@
#include "do60.h"
#include "action_layer.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// 0: Base Layer
[0] = KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_NO, KC_UP, KC_SLSH, \
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_BSPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT),
// 1: Function Layer
[1] = KEYMAP(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \
KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \
KC_NO, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SMOD, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \
KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP, KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_RSFT, KC_NO , KC_PGUP, KC_INS, \
KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC,KC_SPC, KC_DEL, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END),
};
// Custom Actions
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
};
// Macros
/*
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) { register_code(KC_RSFT); }
else { unregister_code(KC_RSFT); }
break;
}
return MACRO_NONE;
};
*/
// Loop
void matrix_scan_user(void) {
// Empty
};

@ -0,0 +1,5 @@
![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg)
All of the keys which CAN have a function should be assigned one.
The keys with KC_NO cannot be assigned a value

@ -0,0 +1,47 @@
#include "do60.h"
#include "action_layer.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// 0: Base Layer
[0] = KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC,KC_SPC, KC_DEL, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT),
// 1: Function Layer
[1] = KEYMAP(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \
KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \
KC_NO, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SMOD, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \
KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP, KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_RSFT, KC_NO , KC_PGUP, KC_INS, \
KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC,KC_SPC, KC_DEL, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END),
};
// Custom Actions
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
};
// Macros
/*
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) { register_code(KC_RSFT); }
else { unregister_code(KC_RSFT); }
break;
}
return MACRO_NONE;
};
*/
// Loop
void matrix_scan_user(void) {
// Empty
};

@ -0,0 +1,5 @@
![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg)
All of the keys which CAN have a function should be assigned one.
The keys with KC_NO cannot be assigned a value

@ -0,0 +1,11 @@
# QMK Firmware for DoyuStudio DO60 PCB
## Quantum MK Firmware
For the full Quantum feature list, see [the parent readme.md](/readme.md).
Board supports in-switch LEDs (two-pin, single colour)
Build-in WS2182 RGB LED for underglow lighting.
## Build
To build the default keymap, simply run `make do60:default`.

@ -0,0 +1,64 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
# LUFA specific
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
AUDIO_ENABLE = no # Audio output on port C6
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
COMMAND_ENABLE = no # Commands for debug and configuration
CONSOLE_ENABLE = no # Console for debug(+400)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
MIDI_ENABLE = no # MIDI controls
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
UNICODE_ENABLE = no # Unicode
Loading…
Cancel
Save