diff --git a/keyboards/preonic/keymaps/default/keymap.c b/keyboards/preonic/keymaps/default/keymap.c
index 33ca90f99b..a6ca601a11 100644
--- a/keyboards/preonic/keymaps/default/keymap.c
+++ b/keyboards/preonic/keymaps/default/keymap.c
@@ -157,7 +157,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_ADJUST] = LAYOUT_preonic_grid( \
   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
-  _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL,  \
+  _______, RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL,  \
   _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
   _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______, \
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
diff --git a/keyboards/preonic/rev3/chconf.h b/keyboards/preonic/rev3/chconf.h
index b52ca7d2c8..ce44925f3c 100644
--- a/keyboards/preonic/rev3/chconf.h
+++ b/keyboards/preonic/rev3/chconf.h
@@ -41,14 +41,14 @@
  * @brief   System time counter resolution.
  * @note    Allowed values are 16 or 32 bits.
  */
-#define CH_CFG_ST_RESOLUTION                16
+#define CH_CFG_ST_RESOLUTION                32
 
 /**
  * @brief   System tick frequency.
  * @details Frequency of the system timer that drives the system ticks. This
  *          setting also defines the system tick time unit.
  */
-#define CH_CFG_ST_FREQUENCY                 10000
+#define CH_CFG_ST_FREQUENCY                 1000
 
 /**
  * @brief   Time delta constant for the tick-less mode.
@@ -58,7 +58,7 @@
  *          The value one is not valid, timeouts are rounded up to
  *          this value.
  */
-#define CH_CFG_ST_TIMEDELTA                 2
+#define CH_CFG_ST_TIMEDELTA                 0
 
 /** @} */
 
diff --git a/keyboards/preonic/rev3/config.h b/keyboards/preonic/rev3/config.h
index 98899dc6ac..d78ab43420 100644
--- a/keyboards/preonic/rev3/config.h
+++ b/keyboards/preonic/rev3/config.h
@@ -122,14 +122,13 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-#define WS2812_LED_N 2
-#define RGBLED_NUM WS2812_LED_N
-#define WS2812_TIM_N 2
-#define WS2812_TIM_CH 2
-#define PORT_WS2812     GPIOA
-#define PIN_WS2812      1
-#define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
-//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
-//#define WS2812_EXTERNAL_PULLUP
+
+#define RGBLIGHT_ANIMATIONS
+
+#define RGBLED_NUM 9
+#define RGB_DI_PIN A1
+#define DRIVER_LED_TOTAL RGBLED_NUM
+
+#define RGB_MATRIX_KEYPRESSES
 
 #endif
diff --git a/keyboards/preonic/rev3/mcuconf.h b/keyboards/preonic/rev3/mcuconf.h
index 2d27bee4e6..cf141de448 100644
--- a/keyboards/preonic/rev3/mcuconf.h
+++ b/keyboards/preonic/rev3/mcuconf.h
@@ -225,7 +225,7 @@
  * ST driver system settings.
  */
 #define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  4
+#define STM32_ST_USE_TIMER                  3
 
 /*
  * UART driver system settings.
diff --git a/keyboards/preonic/rev3/rev3.c b/keyboards/preonic/rev3/rev3.c
index b61beec5d3..1f11357b19 100644
--- a/keyboards/preonic/rev3/rev3.c
+++ b/keyboards/preonic/rev3/rev3.c
@@ -14,6 +14,27 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev3.h"
+#include "rgblight.h"
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+  /*{row | col << 4}
+    |             {x=0..224, y=0..64}
+    |              |                 modifier
+    |              |                 | */
+  {{2|(5<<4)},   {112, 39}, 0},
+  {{7|(1<<4)},   {148, 60}, 0},
+  {{3|(4<<4)},   {206, 53}, 0},
+  {{4|(4<<4)},   {206, 3},  0},
+  {{4|(1<<4)},   {150, 3},  0},
+  {{0|(4<<4)},   {74,  3},  0},
+  {{0|(1<<4)},   {18,  3},  0},
+  {{3|(1<<4)},   {18,  54}, 0},
+  {{7|(4<<4)},   {77,  60}, 0}
+};
+
+
+  uint8_t *o_fb;
+
 
 void matrix_init_kb(void) {
 	matrix_init_user();
diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk
index 7c40d514d2..b6bb2cff76 100644
--- a/keyboards/preonic/rev3/rules.mk
+++ b/keyboards/preonic/rev3/rules.mk
@@ -53,4 +53,5 @@ NKRO_ENABLE = yes	    # USB Nkey Rollover
 CUSTOM_MATRIX = yes # Custom matrix file
 AUDIO_ENABLE = yes
 RGBLIGHT_ENABLE = no
+RGB_MATRIX_ENABLE = WS2812
 # SERIAL_LINK_ENABLE = yes
diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk
index d5b21388af..aeff5add47 100644
--- a/keyboards/preonic/rules.mk
+++ b/keyboards/preonic/rules.mk
@@ -38,7 +38,7 @@ F_USB = $(F_CPU)
 
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
+#     different sizes, comment this out, and the correct address will be loaded
 #     automatically (+60). See bootloader.mk for all options.
 ifeq ($(strip $(KEYBOARD)), preonic/rev1)
     BOOTLOADER = atmel-dfu
@@ -51,7 +51,7 @@ endif
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -73,4 +73,4 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 LAYOUTS = ortho_5x12
 
-DEFAULT_FOLDER = preonic/rev2
\ No newline at end of file
+DEFAULT_FOLDER = preonic/rev2