forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.

Browse Source 
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.

Changed Dataflash_Init() to no longer call SPI_Init() automatically.
pull/1469/head
Dean Camera 15 years ago
parent 1e8df8951a
commit f229502d9a
9 changed files with 58 additions and 63 deletions
Show Stats Download Patch File Download Diff File

3
Demos/Device/ClassDriver/MassStorage/MassStorage.c
Unescape View File

@ -84,7 +84,8 @@ void SetupHardware(void)
/* Hardware Initialization */
LEDs_Init();
Dataflash_Init(SPI_SPEED_FCPU_DIV_2);
SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
Dataflash_Init();
USB_Init();
/* Clear Dataflash sector protections, if enabled */

3
Demos/Device/LowLevel/MassStorage/MassStorage.c
Unescape View File

@ -75,7 +75,8 @@ void SetupHardware(void)
/* Hardware Initialization */
LEDs_Init();
Dataflash_Init(SPI_SPEED_FCPU_DIV_2);
SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
Dataflash_Init();
USB_Init();
/* Clear Dataflash sector protections, if enabled */

10
LUFA/Drivers/Board/Dataflash.h
Unescape View File

@ -164,17 +164,13 @@
#endif
/* Inline Functions: */
/** Initializes the dataflash driver (including the SPI driver) so that commands and data may be
* sent to an attached dataflash IC.
*
* \param[in] PrescalerMask SPI prescaler mask, see SPI.h documentation
/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
* The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
*/
static inline void Dataflash_Init(const uint8_t PrescalerMask)
static inline void Dataflash_Init(void)
{
DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK;
DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
SPI_Init(PrescalerMask, true);
}
/** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive

31
LUFA/Drivers/Peripheral/SPI.h
Unescape View File

@ -61,7 +61,7 @@
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
#define SPI_USE_DOUBLESPEED (1 << 7)
#define SPI_USE_DOUBLESPEED (1 << SPE)
#endif
/* Public Interface - May be used in end-application: */
@ -86,23 +86,40 @@
/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 128. */
#define SPI_SPEED_FCPU_DIV_128 ((1 << SPR1) | (1 << SPR0))
/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the rising edge. */
#define SPI_SCK_LEAD_RISING (0 << CPOL)
/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the falling edge. */
#define SPI_SCK_LEAD_FALLING (1 << CPOL)
/** SPI data sample mode mask for SPI_Init(). Indicates that the data should sampled on the leading edge. */
#define SPI_SAMPLE_LEADING (0 << CPHA)
/** SPI data sample mode mask for SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
#define SPI_SAMPLE_TRAILING (1 << CPHA)
/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
#define SPI_MODE_SLAVE (0 << MSTR)
/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
#define SPI_MODE_MASTER (1 << MSTR)
/* Inline Functions: */
/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
* SPI routines.
*
* \param[in] PrescalerMask Prescaler mask to set the SPI clock speed
* \param[in] Master If true, sets the SPI system to use master mode, slave if false
* \param[in] SPIOptions SPI Options, a mask consisting of one of each of the SPI_SPEED_*,
* SPI_SCK_*, SPI_SAMPLE_* and SPI_MODE_* masks
*/
static inline void SPI_Init(const uint8_t PrescalerMask, const bool Master)
static inline void SPI_Init(const uint8_t SPIOptions)
{
DDRB |= ((1 << 1) | (1 << 2));
PORTB |= ((1 << 0) | (1 << 3));
SPCR = ((1 << SPE) | (Master << MSTR) | (1 << CPOL) | (1 << CPHA) |
(PrescalerMask & ~SPI_USE_DOUBLESPEED));
SPCR = ((1 << SPE) | SPIOptions);
if (PrescalerMask & SPI_USE_DOUBLESPEED)
if (SPIOptions & SPI_USE_DOUBLESPEED)
SPSR |= (1 << SPI2X);
else
SPSR &= ~(1 << SPI2X);

1
LUFA/ManPages/ChangeLog.txt
Unescape View File

@ -23,6 +23,7 @@
* - Added new CDC_Device_Flush() command to the device mode CDC Class driver
* - Added explicit attribute masks to the device mode demos' descriptors
* - Added return values to the CDC and MIDI class driver transmit functions
* - Added extra masks to the SPI driver, changed SPI_Init() so that the clock polarity and sample modes can be set
*
* <b>Fixed:</b>
* - Fixed possible lockup in the CDC device class driver, when the host sends data that is a multiple of the

4
LUFA/ManPages/MigrationInformation.txt
Unescape View File

@ -14,6 +14,10 @@
*
* <b>Non-USB Library Components</b>
* - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library.
* - The Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a
* call to SPI_Init() before using the Dataflash driver
* - The SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See
* the SPI_Init() function documentation for more details
*
* \section Sec_Migration090810 Migrating from 090605 to 090810
*

55
Projects/Incomplete/AVRISP/Lib/V2Protocol.c
Unescape View File

@ -150,10 +150,8 @@ void V2Protocol_ProcessCommand(void)
break;
}
printf("COMMAND 0x%02x\r\n", V2Command);
Endpoint_WaitUntilReady();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
Endpoint_WaitUntilReady();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
}
static void V2Protocol_Command_Unknown(uint8_t V2Command)
@ -167,7 +165,6 @@ static void V2Protocol_Command_Unknown(uint8_t V2Command)
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_UNKNOWN);
@ -178,7 +175,6 @@ static void V2Protocol_Command_SignOn(void)
{
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
Endpoint_Write_Byte(CMD_SIGN_ON);
Endpoint_Write_Byte(STATUS_CMD_OK);
@ -189,31 +185,28 @@ static void V2Protocol_Command_SignOn(void)
static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
{
struct
{
uint8_t ParamID;
uint8_t ParamValue;
} Get_Set_Param_Params;
uint8_t ParamID = Endpoint_Read_Byte();
uint8_t ParamValue;
Endpoint_Read_Stream_LE(&Get_Set_Param_Params, sizeof(Get_Set_Param_Params));
if (V2Command == CMD_SET_PARAMETER)
ParamValue = Endpoint_Read_Byte();
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
uint8_t ParamPrivs = V2Params_GetParameterPrivellages(Get_Set_Param_Params.ParamID);
Endpoint_Write_Byte(V2Command);
uint8_t ParamPrivs = V2Params_GetParameterPrivellages(ParamID);
if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))
{
Endpoint_Write_Byte(STATUS_CMD_OK);
V2Params_SetParameterValue(Get_Set_Param_Params.ParamID, Get_Set_Param_Params.ParamValue);
V2Params_SetParameterValue(ParamID, ParamValue);
}
else if ((V2Command == CMD_GET_PARAMETER) && (ParamPrivs & PARAM_PRIV_READ))
{
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(V2Params_GetParameterValue(Get_Set_Param_Params.ParamID));
Endpoint_Write_Byte(V2Params_GetParameterValue(ParamID));
}
else
{
@ -229,7 +222,6 @@ static void V2Protocol_Command_LoadAddress(void)
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
// TODO: Check for extended address
@ -256,40 +248,28 @@ static void V2Protocol_Command_EnterISPMode(void)
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION);
uint8_t ResponseStatus = STATUS_CMD_FAILED;
Enter_ISP_Params.TimeoutMS -= Enter_ISP_Params.ExecutionDelayMS +
Enter_ISP_Params.PinStabDelayMS;
CurrentAddress = 0;
if (SCKDuration >= sizeof(SPIMaskFromSCKDuration))
SCKDuration = (sizeof(SPIMaskFromSCKDuration) - 1);
V2Protocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
SPI_Init(SPIMaskFromSCKDuration[SCKDuration], true);
SPI_Init(V2Protocol_GetSPIPrescalerMask() | SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_MODE_MASTER);
V2Protocol_ChangeTargetResetLine(true);
V2Protocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
while (Enter_ISP_Params.SynchLoops-- && (ResponseStatus == STATUS_CMD_FAILED))
{
uint8_t ResponseBytes[4];
for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
{
ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]);
V2Protocol_DelayMS(Enter_ISP_Params.ByteDelay);
if (Enter_ISP_Params.TimeoutMS >= Enter_ISP_Params.ByteDelay)
Enter_ISP_Params.TimeoutMS -= Enter_ISP_Params.ByteDelay;
else
ResponseStatus = STATUS_CMD_TOUT;
ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]);
}
if (ResponseBytes[Enter_ISP_Params.PollIndex] == Enter_ISP_Params.PollValue)
/* Check if polling disabled, or if the polled value matches the expected value */
if (!Enter_ISP_Params.PollIndex || (ResponseBytes[Enter_ISP_Params.PollIndex - 1] == Enter_ISP_Params.PollValue))
ResponseStatus = STATUS_CMD_OK;
}
@ -310,7 +290,6 @@ static void V2Protocol_Command_LeaveISPMode(void)
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
V2Protocol_DelayMS(Leave_ISP_Params.PreDelayMS);
V2Protocol_ChangeTargetResetLine(false);
@ -335,7 +314,6 @@ static void V2Protocol_Command_ChipErase(void)
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
uint8_t ResponseStatus = STATUS_CMD_OK;
@ -364,7 +342,6 @@ static void V2Protocol_Command_ReadFuseLockSigOSCCAL(uint8_t V2Command)
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
uint8_t ResponseBytes[4];
@ -389,7 +366,6 @@ static void V2Protocol_Command_WriteFuseLock(uint8_t V2Command)
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++)
SPI_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]);
@ -416,7 +392,6 @@ static void V2Protocol_Command_SPIMulti(void)
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
Endpoint_Write_Byte(CMD_SPI_MULTI);
Endpoint_Write_Byte(STATUS_CMD_OK);

6
Projects/Incomplete/AVRISP/Lib/V2ProtocolParams.c
Unescape View File

@ -51,7 +51,7 @@ static ParameterItem_t ParameterTable[] =
.ParamPrivellages = PARAM_PRIV_READ },
{ .ParamID = PARAM_HW_VER,
.ParamValue = 0x01,
.ParamValue = 0x00,
.ParamPrivellages = PARAM_PRIV_READ },
{ .ParamID = PARAM_SW_MAJOR,
@ -59,7 +59,7 @@ static ParameterItem_t ParameterTable[] =
.ParamPrivellages = PARAM_PRIV_READ },
{ .ParamID = PARAM_SW_MINOR,
.ParamValue = 0x00,
.ParamValue = 0x0C,
.ParamPrivellages = PARAM_PRIV_READ },
{ .ParamID = PARAM_VTARGET,
@ -67,7 +67,7 @@ static ParameterItem_t ParameterTable[] =
.ParamPrivellages = PARAM_PRIV_READ },
{ .ParamID = PARAM_SCK_DURATION,
.ParamValue = 0,
.ParamValue = 0xFF,
.ParamPrivellages = PARAM_PRIV_READ | PARAM_PRIV_WRITE },
{ .ParamID = PARAM_RESET_POLARITY,

8
Projects/Incomplete/AVRISP/makefile
Unescape View File

@ -60,7 +60,7 @@
# MCU name
MCU = at90usb1287
MCU = at90usb647
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
@ -194,9 +194,9 @@ CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
CDEFS += -DRESET_LINE_PORT=PORTA
CDEFS += -DRESET_LINE_DDR=DDRA
CDEFS += -DRESET_LINE_MASK="(1 << 0)"
CDEFS += -DRESET_LINE_PORT=PORTB
CDEFS += -DRESET_LINE_DDR=DDRB
CDEFS += -DRESET_LINE_MASK="(1 << 4)"
# Place -D or -U options here for ASM sources

Write Preview
Loading…
Cancel
Save