Merge pull request #8 from JeffreySung/master
Apple IIgs(A9M0330)/Standard(M0116) keyboardpull/12/head
tmk
12 years ago
commit
fce750a176
@ -0,0 +1,95 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = IIgs_Standard
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
#MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options --------------------------
|
||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/pjrc.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
@ -0,0 +1,45 @@
|
||||
Replacable USB Controller for Apple IIgs/Standard(M0116)
|
||||
JeffreySung(nattyman@gmail.com)
|
||||
|
||||
===============================
|
||||
|
||||
Feature
|
||||
-------
|
||||
- Replaceable keyboard controller for Apple IIgs(A9M0330)/Standard(M0116)
|
||||
- Teensy++ 2.0 required
|
||||
- Some signal bypass required
|
||||
- ADB keyboard doesn't use matrix for modifier keys. With virtual row for modifier keys,
|
||||
these keys are merged into key matrix using virtual row.
|
||||
|
||||
History
|
||||
=======
|
||||
- 2012.09.17 First Release
|
||||
- 2012.09.17 CapsLock support
|
||||
- 2012.09.19 Power button added
|
||||
Build
|
||||
=====
|
||||
0. Just Type "Make" and return.
|
||||
|
||||
Hardware
|
||||
========
|
||||
PJRC Teensy
|
||||
-----------
|
||||
0. The following ports should not be connected to board.
|
||||
From top view of Teensy++, from GND and counter clock wise.
|
||||
-7,26(in keyboard PCB, these pins are VDD,GND)
|
||||
-30,31(in Teensy++, these pins are Ref,GND respectively)
|
||||
-5,6(D2,D3 for bluetooth in future)
|
||||
1. Bypass #31 pin(from board) to E4(Teensy)
|
||||
2. Bypass #30 pin(from board) to F2(Teensy)
|
||||
3. Bypass #6 pin(from board) to A0(Teensy)
|
||||
4. Refer doc directory
|
||||
|
||||
To Do
|
||||
=====
|
||||
0. When DEBOUNCE defined, there is a errors.
|
||||
1. Layer Change by toggling Clear Key
|
||||
2. Eject Key add. (following files should be modified.)
|
||||
common/usb_keycodes.h
|
||||
common/keyboard.c
|
||||
3. Use bluetooth
|
||||
EOF
|
||||
@ -0,0 +1,68 @@
|
||||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
/* controller configuration */
|
||||
#include "controller_teensy.h"
|
||||
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
/* for Apple
|
||||
#define VENDOR_ID 0x05AC
|
||||
#define PRODUCT_ID 0xBEE0
|
||||
*/
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0xBEE0
|
||||
#define DEVICE_VER 0x0202
|
||||
#define MANUFACTURER t.m.k.
|
||||
#define PRODUCT Apple Desktop Bus Keyboard
|
||||
|
||||
|
||||
/* message strings */
|
||||
#define DESCRIPTION Apple M0116/A9M0660 keyboard firmware
|
||||
|
||||
|
||||
/* matrix size */
|
||||
#define MATRIX_ROWS 11 // last row is virtual for modifier
|
||||
#define MATRIX_COLS 8
|
||||
/* define if matrix has ghost */
|
||||
#define MATRIX_HAS_GHOST
|
||||
/* Set 0 if need no debouncing */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \
|
||||
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \
|
||||
)
|
||||
|
||||
|
||||
/* layer switching */
|
||||
#define LAYER_SWITCH_DELAY 100
|
||||
#define LAYER_SEND_FN_TERM 300
|
||||
|
||||
|
||||
/* mouse keys */
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
# define MOUSEKEY_DELAY_TIME 192
|
||||
#endif
|
||||
|
||||
|
||||
#endif
|
||||
|
After Width: | Height: | Size: 322 KiB |
|
After Width: | Height: | Size: 72 KiB |
Binary file not shown.
@ -0,0 +1,142 @@
|
||||
/*
|
||||
Copyright 2012 Jeffrey Sung <nattyman@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Keymap for Apple IIgs/Standard Keyboard
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include "usb_keycodes.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "keymap.h"
|
||||
|
||||
|
||||
// Convert physical keyboard layout to matrix array.
|
||||
// This is a macro to define keymap easily in keyboard layout form.
|
||||
#define KEYMAP( R10C5, \
|
||||
R3C7, R3C6, R3C5, R3C4, R3C3, R3C2, R3C1, R8C1, R8C0, R3C0, R0C0, R0C1, R0C2, R0C3, R4C4, R4C5, R4C6, R4C7, \
|
||||
R9C7, R9C6, R9C5, R9C4, R9C3, R9C2, R9C1, R9C0, R1C0, R1C1, R1C2, R1C3, R1C4, R2C4, R2C5, R2C6, R2C3, \
|
||||
R10C0,R7C7, R7C6, R7C5, R7C4, R7C3, R7C2, R7C1, R7C0, R0C4, R1C6, R1C7, R1C5, R2C0, R2C1, R2C2, R2C7, \
|
||||
R10C1,R6C7, R6C6, R6C5, R6C4, R6C3, R6C2, R6C1, R6C0, R0C5, R0C6, R4C0, R4C1, R4C2, \
|
||||
R10C4,R10C2,R10C3,R5C4, R5C7, R5C5, R5C6, R5C0, R5C2, R0C7, R5C1, R5C3, R4C3 \
|
||||
) { \
|
||||
{ R0C0, R0C1, R0C2, R0C3, R0C4, R0C5, R0C6, R0C7 }, \
|
||||
{ R1C0, R1C1, R1C2, R1C3, R1C4, R1C5, R1C6, R1C7 }, \
|
||||
{ R2C0, R2C1, R2C2, R2C3, R2C4, R2C5, R2C6, R2C7 }, \
|
||||
{ R3C0, R3C1, R3C2, R3C3, R3C4, R3C5, R3C6, R3C7 }, \
|
||||
{ R4C0, R4C1, R4C2, R4C3, R4C4, R4C5, R4C6, R4C7 }, \
|
||||
{ R5C0, R5C1, R5C2, R5C3, R5C4, R5C5, R5C6, R5C7 }, \
|
||||
{ R6C0, R6C1, R6C2, R6C3, R6C4, R6C5, R6C6, R6C7 }, \
|
||||
{ R7C0, R7C1, R7C2, R7C3, R7C4, R7C5, R7C6, R7C7 }, \
|
||||
{ R8C0, R8C1, KB_NO, KB_NO, KB_NO,KB_NO, KB_NO, KB_NO }, \
|
||||
{ R9C0, R9C1, R9C2, R9C3, R9C4, R9C5, R9C6, R9C7 }, \
|
||||
{ R10C0,R10C1, R10C2, R10C3, R10C4,R10C5, KB_NO, KB_NO} \
|
||||
}
|
||||
|
||||
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
|
||||
|
||||
|
||||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
|
||||
static const uint8_t PROGMEM fn_layer[] = {
|
||||
0, // Fn0
|
||||
1, // Fn1
|
||||
2, // Fn2
|
||||
3, // Fn3
|
||||
4, // Fn4
|
||||
0, // Fn5
|
||||
3, // Fn6
|
||||
3 // Fn7
|
||||
};
|
||||
|
||||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
|
||||
// See layer.c for details.
|
||||
static const uint8_t PROGMEM fn_keycode[] = {
|
||||
KB_NO, // Fn0
|
||||
KB_NO, // Fn1
|
||||
KB_SLSH, // Fn2
|
||||
KB_SCLN, // Fn3
|
||||
KB_SPC, // Fn4
|
||||
KB_NO, // Fn5
|
||||
KB_NO, // Fn6
|
||||
KB_NO // Fn7
|
||||
};
|
||||
|
||||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Layer 0: Default Layer
|
||||
* ,-----------------------------------------------------------. ,---------------,
|
||||
* | POWER | | |
|
||||
* |-----------------------------------------------------------| |---------------|
|
||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |FN0| = | / | * |
|
||||
* |-----------------------------------------------------------| |---------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7 | 8 | 9 | + |
|
||||
* |-----------------------------------------------------' | |---------------|
|
||||
* |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return | | 4 | 5 | 6 | - |
|
||||
* |-----------------------------------------------------------| |---------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| / |Shift | | 1 | 2 | 3 | E |
|
||||
* |-----------------------------------------------------------| |-----------| N |
|
||||
* |CAPS|Alt |Gui |` |SPC |BSLS |LFT|RGT|DN|UP| | 0 | . | T |
|
||||
* `-----------------------------------------------------------' |---------------'
|
||||
*/
|
||||
KEYMAP( KB_PWR,
|
||||
KB_ESC, KB_1, KB_2, KB_3, KB_4, KB_5, KB_6, KB_7, KB_8, KB_9, KB_0, KB_MINS,KB_EQL, KB_BSPC, KB_FN1, KB_PEQL, KB_PSLS, KB_PAST, \
|
||||
KB_TAB, KB_Q, KB_W, KB_E, KB_R, KB_T, KB_Y, KB_U, KB_I, KB_O, KB_P, KB_LBRC,KB_RBRC, KB_P7, KB_P8, KB_P9, KB_PPLS, \
|
||||
KB_LCTL,KB_A, KB_S, KB_D, KB_F, KB_G, KB_H, KB_J, KB_K, KB_L, KB_SCLN, KB_QUOT,KB_ENT, KB_P4, KB_P5, KB_P6, KB_PMNS, \
|
||||
KB_LSFT,KB_Z, KB_X, KB_C, KB_V, KB_B, KB_N, KB_M, KB_COMM,KB_DOT, KB_SLSH, KB_P1, KB_P2, KB_P3, \
|
||||
KB_CAPS,KB_LALT,KB_LGUI,KB_GRV, KB_SPC, KB_BSLS,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP, KB_P0, KB_PDOT, KB_PENT),
|
||||
|
||||
|
||||
/* Layer 1: Tenkey use Layer
|
||||
* ,-----------------------------------------------------------. ,---------------,
|
||||
* | POWER | | |
|
||||
* |-----------------------------------------------------------| |---------------|
|
||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NLK| = | / | * |
|
||||
* |-----------------------------------------------------------| |---------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | |INS| 8 |PGU|V+ |
|
||||
* |-----------------------------------------------------' | |---------------|
|
||||
* |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return | |DEL|UP |PGD|V- |
|
||||
* |-----------------------------------------------------------| |---------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| / |Shift | |LFT|DN |RGT| E |
|
||||
* |-----------------------------------------------------------| |-----------| N |
|
||||
* |CAPS|Alt |Gui |` |SPC |BSLS |LFT|RGT|DN|UP| | 0 | . | T |
|
||||
* `-----------------------------------------------------------' `---------------'
|
||||
*/
|
||||
KEYMAP( KB_PWR, \
|
||||
KB_ESC, KB_1, KB_2, KB_3, KB_4, KB_5, KB_6, KB_7, KB_8, KB_9, KB_0, KB_MINS,KB_EQL, KB_BSPC, KB_FN1, KB_PEQL, KB_PSLS, KB_MUTE, \
|
||||
KB_TAB, KB_Q, KB_W, KB_E, KB_R, KB_T, KB_Y, KB_U, KB_I, KB_O, KB_P, KB_LBRC,KB_RBRC, KB_INS, KB_P8, KB_PGUP, KB_VOLU, \
|
||||
KB_LCTL,KB_A, KB_S, KB_D, KB_F, KB_G, KB_H, KB_J, KB_K, KB_L, KB_SCLN, KB_QUOT,KB_ENT, KB_DEL, KB_UP, KB_PGDN, KB_VOLD, \
|
||||
KB_LSFT,KB_Z, KB_X, KB_C, KB_V, KB_B, KB_N, KB_M, KB_COMM,KB_DOT, KB_SLSH, KB_LEFT, KB_DOWN, KB_RIGHT, \
|
||||
KB_CAPS,KB_LALT,KB_LGUI,KB_GRV, KB_SPC, KB_BSLS,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP, KB_P0, KB_PDOT, KB_PENT),
|
||||
};
|
||||
|
||||
|
||||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
|
||||
{
|
||||
return KEYCODE(layer, row, col);
|
||||
}
|
||||
|
||||
uint8_t keymap_fn_layer(uint8_t fn_bits)
|
||||
{
|
||||
return pgm_read_byte(&fn_layer[biton(fn_bits)]);
|
||||
}
|
||||
|
||||
uint8_t keymap_fn_keycode(uint8_t fn_bits)
|
||||
{
|
||||
return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
|
||||
}
|
||||
@ -0,0 +1,24 @@
|
||||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "stdint.h"
|
||||
#include "led.h"
|
||||
|
||||
|
||||
void led_set(uint8_t usb_led)
|
||||
{
|
||||
}
|
||||
@ -0,0 +1,363 @@
|
||||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
* scan matrix
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "led.h"
|
||||
|
||||
|
||||
#if (MATRIX_COLS > 16)
|
||||
# error "MATRIX_COLS must not exceed 16"
|
||||
#endif
|
||||
#if (MATRIX_ROWS > 255)
|
||||
# error "MATRIX_ROWS must not exceed 255"
|
||||
#endif
|
||||
|
||||
|
||||
#ifndef DEBOUNCE
|
||||
# define DEBOUNCE 0
|
||||
#endif
|
||||
static uint8_t debouncing = DEBOUNCE;
|
||||
|
||||
// matrix state buffer(1:on, 0:off)
|
||||
#if (MATRIX_COLS <= 8)
|
||||
static uint8_t *matrix;
|
||||
static uint8_t *matrix_prev;
|
||||
static uint8_t _matrix0[MATRIX_ROWS];
|
||||
static uint8_t _matrix1[MATRIX_ROWS];
|
||||
#else
|
||||
static uint16_t *matrix;
|
||||
static uint16_t *matrix_prev;
|
||||
static uint16_t _matrix0[MATRIX_ROWS];
|
||||
static uint16_t _matrix1[MATRIX_ROWS];
|
||||
#endif
|
||||
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
static bool matrix_has_ghost_in_row(uint8_t row);
|
||||
#endif
|
||||
static uint8_t read_col(uint8_t row);
|
||||
static void unselect_rows(void);
|
||||
static void select_row(uint8_t row);
|
||||
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void)
|
||||
{
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void)
|
||||
{
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
// initialize row and col
|
||||
unselect_rows();
|
||||
// Input with pull-up(DDR:0, PORT:1)
|
||||
// Column C1 ~ C7 (PortC0-6)
|
||||
// Column C0(Port E1)
|
||||
DDRC &= ~0b01111111;
|
||||
PORTC |= 0b01111111;
|
||||
DDRE &= ~0b00000010;
|
||||
PORTE |= 0b00000010;
|
||||
//DDRB &= ~0b00000100;
|
||||
//PORTB |= 0b00000100;
|
||||
// modifier B3/4,F4/5,E4 always input
|
||||
// A0
|
||||
//DDRA |= 0b00000001;
|
||||
//PORTA &= 0b00000001;
|
||||
//DDRB |= 0b00011000;
|
||||
//PORTB &= 0b00011000;
|
||||
//DDRF |= ~0b00110000;
|
||||
//PORTF &= 0b00110000;
|
||||
//DDRB &= ~0b00011000;
|
||||
//PORTB |= 0b00011000;
|
||||
//DDRF &= ~0b00110000;
|
||||
//PORTF |= 0b00110000;
|
||||
//DDRE &= ~0b00010000;
|
||||
//PORTE |= 0b00010000;
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
|
||||
matrix = _matrix0;
|
||||
matrix_prev = _matrix1;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
if (!debouncing) {
|
||||
uint8_t *tmp = matrix_prev;
|
||||
matrix_prev = matrix;
|
||||
matrix = tmp;
|
||||
}
|
||||
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
unselect_rows();
|
||||
select_row(i);
|
||||
_delay_us(30); // without this wait read unstable value.
|
||||
if ( i == ( MATRIX_ROWS - 1 ) ) { // CHECK CAPS LOCK
|
||||
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { // CAPS LOCK is ON on HOST
|
||||
if ( ~read_col(i) & (1<< 4) ) { // CAPS LOCK is still DOWN ( 0bXXX1_XXXX)
|
||||
matrix[i] = ~read_col(i) & 0b11101111; // change CAPS LOCK as released
|
||||
} else { // CAPS LOCK in UP
|
||||
matrix[i] = ~read_col(i) | 0b00010000; // send fake caps lock down
|
||||
}
|
||||
} else { // CAPS LOCK is OFF on HOST
|
||||
if (matrix[i] != (uint8_t)~read_col(i)) {
|
||||
matrix[i] = (uint8_t)~read_col(i);
|
||||
if (debouncing) {
|
||||
debug("bounce!: "); debug_hex(debouncing); print("\n");
|
||||
}
|
||||
debouncing = DEBOUNCE;
|
||||
}
|
||||
}
|
||||
} else {
|
||||
if (matrix[i] != (uint8_t)~read_col(i)) {
|
||||
matrix[i] = (uint8_t)~read_col(i);
|
||||
if (debouncing) {
|
||||
debug("bounce!: "); debug_hex(debouncing); print("\n");
|
||||
}
|
||||
debouncing = DEBOUNCE;
|
||||
}
|
||||
}
|
||||
}
|
||||
unselect_rows();
|
||||
|
||||
if (debouncing) {
|
||||
debouncing--;
|
||||
}
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void)
|
||||
{
|
||||
if (debouncing) return false;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
if (matrix[i] != matrix_prev[i]) {
|
||||
return true;
|
||||
}
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_has_ghost(void)
|
||||
{
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
if (matrix_has_ghost_in_row(i))
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
// if ( row == ( MATRIX_ROWS - 1 ) && col == 4) { // CHECK CAPS LOCK
|
||||
// if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { // CAPS LOCK is ON on HOST
|
||||
// if ((matrix_prev[row] & 0b00010000) && (~matrix[row] & 0b00010000)) {
|
||||
// debug("CapsLock Reverse:");debug_hex(matrix[row]);
|
||||
// matrix[row] |= 0b00010000;
|
||||
// matrix_prev[row] &= ~0b00010000;
|
||||
// debug("->");debug_hex(matrix[row]);debug("\n");
|
||||
// }
|
||||
// }
|
||||
// }
|
||||
return (matrix[row] & (1<<col));
|
||||
}
|
||||
|
||||
inline
|
||||
#if (MATRIX_COLS <= 8)
|
||||
uint8_t matrix_get_row(uint8_t row)
|
||||
#else
|
||||
uint16_t matrix_get_row(uint8_t row)
|
||||
#endif
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print("\nr/c 01234567\n");
|
||||
for (uint8_t row = 0; row < matrix_rows(); row++) {
|
||||
phex(row); print(": ");
|
||||
#if (MATRIX_COLS <= 8)
|
||||
pbin_reverse(matrix_get_row(row));
|
||||
#else
|
||||
pbin_reverse16(matrix_get_row(row));
|
||||
#endif
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
if (matrix_has_ghost_in_row(row)) {
|
||||
print(" <ghost");
|
||||
}
|
||||
#endif
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
#if (MATRIX_COLS <= 8)
|
||||
count += bitpop(matrix[i]);
|
||||
#else
|
||||
count += bitpop16(matrix[i]);
|
||||
#endif
|
||||
}
|
||||
return count;
|
||||
}
|
||||
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
inline
|
||||
static bool matrix_has_ghost_in_row(uint8_t row)
|
||||
{
|
||||
// no ghost exists in case less than 2 keys on
|
||||
if (((matrix[row] - 1) & matrix[row]) == 0)
|
||||
return false;
|
||||
|
||||
// ghost exists in case same state as other row
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
||||
if (i != row && (matrix[i] & matrix[row]) == matrix[row])
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
inline
|
||||
static uint8_t read_col(uint8_t row)
|
||||
{
|
||||
// For normal : Column C1 ~ C7 (PortC0-6), C0(Port E1)
|
||||
// For modifier : B3(CNTRL)/4(SHIFT),F4(CMD/GUI)/5(OPTION,ALT)
|
||||
// Modifier would be copied to report->mods except E4(CAPSLOCK)
|
||||
uint8_t tmp;
|
||||
if ( row == 10 ) {
|
||||
tmp = 0xC0;
|
||||
tmp |= (PINB >> 3 ) & 0b00000011; // LEFT CTRL is 0bit in modifier (HID Spec)
|
||||
// LEFT SHIFT is 1bit in modifier (HID Spec)
|
||||
tmp |= (PINF >> 3 ) & 0b00000100; // LEFT ALT is 2bit in modifier (HID Spec)
|
||||
tmp |= (PINF >> 1 ) & 0b00001000; // LEFT GUI is 3bit in modifier (HID Spec)
|
||||
tmp |= (PINA << 4 ) & 0b00010000; // CAPSLOCK
|
||||
tmp |= (PINB << 3 ) & 0b00100000; // POWER
|
||||
} else {
|
||||
tmp = 0x00;
|
||||
tmp = (PINE >> 1)&0b00000001;
|
||||
tmp |= PINC << 1 ;
|
||||
}
|
||||
return tmp;
|
||||
}
|
||||
|
||||
inline
|
||||
static void unselect_rows(void)
|
||||
{
|
||||
// Hi-Z(DDR:0, PORT:0) to unselect
|
||||
// DDR : 1, output 0, input
|
||||
DDRB &= ~0b00000011; // PB: 1,0
|
||||
PORTB &= ~0b00000011;
|
||||
DDRD &= ~0b00010000; // PD: 4
|
||||
PORTD &= ~0b00010000;
|
||||
DDRE &= ~0b11000000; // PE: 7,6
|
||||
PORTE &= ~0b11000000;
|
||||
DDRF &= ~0b11000111; // PF: 7,6,2,1,0
|
||||
PORTF &= ~0b11000111;
|
||||
// to unselect virtual row(modifier), set port to output with low
|
||||
DDRA |= 0b00000001; // PA: 0 for CAPSLOCK
|
||||
PORTA &= ~0b00000001;
|
||||
DDRB |= 0b00011100; // PB: 3,4 for modifier(row10)
|
||||
PORTB &= ~0b00011100; // PB: 2 for power
|
||||
DDRF |= 0b00110000; // PF: 4,5 for modifier
|
||||
PORTF &= ~0b00110000;
|
||||
}
|
||||
|
||||
inline
|
||||
static void select_row(uint8_t row)
|
||||
{
|
||||
// Output low(DDR:1, PORT:0) to select
|
||||
// with row enable, column could send low to AVR when pressed
|
||||
// row: 0 1 2 3 4 5 6 7 8 9
|
||||
// pin: PB1, PB0, PE7, PE6, PD4, PF2, PF0, PF1, PF6 PF7
|
||||
switch (row) {
|
||||
case 0:
|
||||
DDRB |= (1<<1);
|
||||
PORTB &= ~(1<<1);
|
||||
break;
|
||||
case 1:
|
||||
DDRB |= (1<<0);
|
||||
PORTB &= ~(1<<0);
|
||||
break;
|
||||
case 2:
|
||||
DDRE |= (1<<7);
|
||||
PORTE &= ~(1<<7);
|
||||
break;
|
||||
case 3:
|
||||
DDRE |= (1<<6);
|
||||
PORTE &= ~(1<<6);
|
||||
break;
|
||||
case 4:
|
||||
DDRD |= (1<<4);
|
||||
PORTD &= ~(1<<4);
|
||||
break;
|
||||
case 5:
|
||||
DDRF |= (1<<2);
|
||||
PORTF &= ~(1<<2);
|
||||
break;
|
||||
case 6:
|
||||
DDRF |= (1<<0);
|
||||
PORTF &= ~(1<<0);
|
||||
break;
|
||||
case 7:
|
||||
DDRF |= (1<<1);
|
||||
PORTF &= ~(1<<1);
|
||||
break;
|
||||
case 8:
|
||||
DDRF |= (1<<6);
|
||||
PORTF &= ~(1<<6);
|
||||
break;
|
||||
case 9:
|
||||
DDRF |= (1<<7);
|
||||
PORTF &= ~(1<<7);
|
||||
break;
|
||||
case 10:
|
||||
// modifier has no row enable
|
||||
// to select virtual row, set port as input
|
||||
DDRA &= ~0b00000001;
|
||||
PORTA |= 0b00000001;
|
||||
DDRB &= ~0b00011100;
|
||||
PORTB |= 0b00011100;
|
||||
DDRF &= ~0b00110000;
|
||||
PORTF |= 0b00110000;
|
||||
break;
|
||||
|
||||
}
|
||||
}
|
||||
Loading…
Reference in new issue