Broke everything

keyboards/lets_split_vitamins/i2c.c

@@ -6,7 +6,7 @@
 #include <stdbool.h>
 #include "i2c.h"
 
-#ifdef USE_I2C
+#ifndef USE_I2C
 
 // Limits the amount of we wait for any one i2c transaction.
 // Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
@@ -36,6 +36,9 @@ void i2c_delay(void) {
 
 // Setup twi to run at 100kHz
 void i2c_master_init(void) {
+  // Reset the registers set by slave mode
+  TWAR = 0xFE;
+  TWCR = 0;
   // no prescaler
   TWSR = 0;
   // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.

keyboards/lets_split_vitamins/matrix.c

@@ -40,6 +40,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #  include "serial.h"
 #endif
 
+// Seconds to keep checking if USB has been enumearted, before settling for being slave half.
+#define USBTIMEOUT 3
+
 #ifndef DEBOUNCING_DELAY
 #   define DEBOUNCING_DELAY 5
 #endif
@@ -128,7 +131,21 @@ uint8_t matrix_cols(void)
 }
 
 bool has_usb(void) {
-  return UDADDR & _BV(ADDEN); // This will return true of a USB connection has been established
+  return UDADDR & _BV(ADDEN); // This will return true if a USB connection has been established
+}
+
+void timer_reset(void) {
+  #ifndef __AVR_ATmega32A__
+    TCCR0A = 0;
+    TCCR0B = 0;
+    OCR0A = 0;
+    TIMSK0 = 0;
+#else
+    // Timer0 CTC mode
+    TCCR0 = 0;
+    OCR0 = 0;
+    TIMSK = 0;
+#endif
 }
 
 void matrix_init(void)
@@ -156,28 +173,34 @@ void matrix_init(void)
     matrix_debouncing[i] = 0;
   }
 
-  _delay_ms(2000); // Give USB 2 seconds to establish a connection
+  // initialize as slave
+  timer_init();
+  #ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+  #else
+    serial_slave_init();
+  #endif
+
+  sei();
+
+  matrix_init_quantum();
+
+  /* Wait USBTIMEOUT for USB
+  uint32_t timeout_start = timer_count;
+  while(!has_usb() && USBTIMEOUT > timer_count - timeout_start) {
+    matrix_slave_scan();
+  }*/
 
-  if (has_usb()) { // Set up as master
+  // If we have USB, switch to master
+  if(has_usb()) {
+    //timer_reset();
     #ifdef USE_I2C
       i2c_master_init();
     #else
       serial_master_init();
     #endif
-
-  } else { // Set up as slave
-    timer_init();
-    #ifdef USE_I2C
-      i2c_slave_init(SLAVE_I2C_ADDRESS);
-    #else
-      serial_slave_init();
-    #endif
   }
-  sei();
-
-  matrix_init_quantum();
-
-  if(!has_usb()){
+  else{
     while (1) {
       matrix_slave_scan();
     }

keyboards/lets_split_vitamins/rev1/config.h

@@ -38,6 +38,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { F5, F6, C7, F7 }
 #define MATRIX_COL_PINS { F1, F4, E2, B6, D7, D6}
 
+/* define if matrix uses jtag pins */
+#define DISABLE_JTAG
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST