04740d680e
The library bootloaders will now correctly start the user application after a watchdog-based application start, even if the /HWB line is held low externally during the reset phase.
13 years ago
69ecaae732
Added support for the DorkbotPDX Duce board.
13 years ago
bd6123e2c1
Fixed inverted LED logic in the USB2AX board LED driver (thanks to Nicolas Saugnier).
13 years ago
e875d7cf9f
Changed MIDI event structure MIDI_EventPacket_t to use a single field for the combined virtual cable index and command ID, to prevent bitfield packing issues on some architectures (thanks to Darren Gibbs).
13 years ago
56aed4b3e6
Fixed AVRISP-MKII programmer project reset line polarity inverted when the generated EEP file is loaded into the USB AVR's EEPROM and avr-dude is used.
13 years ago
c0841d98c5
Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock).
13 years ago
2e757d8c38
Added new SerialToLCD user project contributed by Simon Foster.
13 years ago
47f6a35013
Reintegrate the FullEPAddresses development branch into trunk.
13 years ago
e8570c4a37
Fixed CDC and DFU bootloaders failing to compile when the bootloader section size is 8KB or more (thanks to Georg Glock).
13 years ago
b2fe539d1c
Removed the old pseudo-scheduler from the library as it was unused and deprecated since the 090810 release.
13 years ago
f11826fc47
Minor documentation improvements.
13 years ago
25ac76a251
Reverted AVRISP-MKII clone project watchdog based command timeout patch in favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed.
13 years ago
b3aaffb792
Removed variable axis support from the HID_DESCRIPTOR_JOYSTICK() macro due to OS incompatibilities, replaced with fixed 3-axis joystick report structure.
13 years ago
7cac5e22d7
Added additional bootloader API data to expose the bootloader start address and class to the DFU and CDC class bootloaders.
13 years ago
bbf9d14bf9
Fixed AVRISP-MKII programmer project failing to compile for the U4 chips when VTARGET_ADC_CHANNEL is defined to an invalid channel and NO_VTARGET_DETECT is defined (thanks to Steven Morehouse).
13 years ago
a77c3edc37
Fixed inverted LED logic in the OLIMEX162 board LED driver.
13 years ago
e58915344d
Fixed error in the AVRISP-MKII programmer when ISP mode is used at 64KHz (thanks to Ben R. Porter).
13 years ago
1971a415e5
Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin).
13 years ago
f87aec2264
Fixed incorrect call to the user callback CALLBACK_Audio_Device_GetSetInterfaceProperty() in the Audio Class device driver (thanks to Tiit Ratsep).
13 years ago
77adb2ba52
Audio Device Class driver changed to also require the index of the Audio Control interface within the device, for SET/GET/CUR/MIN/MAX/RES property adjustments.
13 years ago
3ea356a720
Added Dataflash operational checks and aborts to all projects using the Dataflash to ensure it is working correctly before use.
13 years ago
17f104cbe8
Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid).
13 years ago
6ee79029d5
Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target.
13 years ago
f5c155cf05
Minor documentation improvements.
13 years ago
6a9d1eab2d
Modified the CDC Host demos to set a default CDC Line Encoding on enumerated devices.
13 years ago
5561524a8f
Added support for the BitWizard Multio and Big-Multio boards.
13 years ago
4068efbd18
Remove potentially unaligned uint32_t access in HIDParser.c, replace with standard C bit shifts.
13 years ago
6c738343ae
Update trunk post-120219 release.
13 years ago
9a6c6c786e
Commit for the 120219 release.
13 years ago
84ff878fd7
Fix errors uncovered by the new build test compile warnings; fix UC3 pipe configuration function broken, redundant function prototypes and unused parameters.
13 years ago
50ff97f378
All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance.
13 years ago
2f036ae2bf
Add build test for forced single USB modes.
...
Fix UC3 Interrupt Management platform driver not compiling under C++.
13 years ago
1132488e8f
Add build tests to verify correct compilation of as many modules as possible under as many architectures as possible.
...
Fix broken compilation of LUFA under C++ compilers when the Serial peripheral module header file is included in a C++ source file.
Fix missing semicolon in the UC3 architecture host pipe functions.
Fix failed compilation for the XMEGA architecture if USB_DEVICE_ONLY us not specified.
13 years ago
09d2be0dc1
Add new Master SPI Mode USART serial peripheral driver for the XMEGA and AVR8 architectures.
...
Modify board Dataflash drivers so that each individual board is responsible for including the correct peripheral driver (SPI or SerialSPI) based on the board connections to the Dataflash chip.
Complete A3BU-XPLAINED and B1-XPLAINED board Dataflash drivers.
13 years ago
f45d60f768
Added Serial USART peripheral driver for the XMEGA platform.
...
Fix XMEGA SPI peripheral driver's incorrect const-ness on the SPI peripheral struct.
13 years ago
2180f57d17
Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage.
13 years ago
c60897df39
Allow serial strings to be generated on the older AVR8 devices which do not explicitly state they contain unique values in the datasheet, as this appears to be implemented in hardware.
13 years ago
18b82b3575
Updated the AVRISP-MKII Clone programmer project to be compatible with the latest version of AVR Studio (version 5.1).
...
Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent warnings in AVR Studio 5.1 when programming XMEGA devices.
13 years ago
4d131de85b
Add board driver support for the Atmel XMEGA-B1 Xplained board.
...
Fix Dataflash driver for the A3BU-Xplained board.
Minor documentation improvements.
13 years ago
da676f0f70
Add support for the Micropendous (Arduino-like) series of boards (revisions 1 and 2).
13 years ago
a677254026
Added INVERTED_VBUS_ENABLE_LINE and NO_AUTO_VBUS_MANAGEMENT compile time options (thanks to Opendous Inc.).
13 years ago
252bd7bb2c
Fixed invalid PID value used in the TempDataLogger project host application (thanks to Anupam Pathak).
13 years ago
43a3350981
Add API support signature to the CDC and DFU class bootloaders, so that the application can detect the bootloader's API support.
13 years ago
10a56f6105
Add support for the Micropendous series of USB AVR8 boards.
13 years ago
956f9e3709
Fixed AVRISP-MKII Clone timing out on long programming commands such as programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling).
13 years ago
9f99c7fa03
Fixed DFU class bootloader not resetting the LED pins as high impedance inputs when a software jump to the user applications is requested.
13 years ago
5563da6a62
Added new LEDs_Disable(), Buttons_Disable() and Joystick_Disable() functions to the board hardware drivers.
13 years ago
a147cee95f
Added new CALLBACK_Audio_Device_GetSetInterfaceProperty() callback to the Audio Device Class driver.
13 years ago
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
13 years ago
154d28e39f
Fixed incorrect implementation of LEDs_ToggleLEDs() for the Adafruit-U4 board (thanks to Caroline Saliman).
13 years ago
Dean Camera