13085a3351
AppConfigHeaders: Switch low level Device mode demos to use LUFAConfig.h configuration header files.
13 years ago
359fbfe14d
Add branch for the conversion of demos to use standard C header files for configuration, rather than makefile defined macros.
13 years ago
3211b35a4c
Make Doxygen fail for any Doxygen output other than unsupported tags (as these are somewhat benign).
...
Improve exclusion list for the main library export_tar rule to exclude any compiled library files from the export.
13 years ago
d5291c2e10
Only abort Doxygen documentation generation if a non-unsupported tag warning is encountered.
13 years ago
663f9bd5f5
Update Doxygen documentation build scripts to fail if any warnings are generated.
13 years ago
eb2431ecd8
Update Doxygen configuration files to disable Markdown support.
13 years ago
dba5004684
Update Doxygen configuration files for all projects.
13 years ago
7416ebd7c6
Update StaticAnalysisTest to check for missing header files. Fix found incorrect header file paths in the demos and projects.
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
fc4d3ab400
Minor documentation improvements.
13 years ago
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
13 years ago
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
13 years ago
e30be658c9
Add missing SVN eol-style property to ensure that source code line endings and converted to the native values on checkout.
13 years ago
c9e817ff47
Fixed port state table corruption in the TCP layer of the RNDIS Ethernet device demos.
...
Fix additional warnings under GCC 4.6.
13 years ago
b5682f2c44
Add project name to the Doxygen makefile target output.
13 years ago
aae59857a2
Add const qualifier to all PROGMEM data to prevent warnings in newer AVR-GCC compiler versions.
13 years ago
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
14 years ago
85e85befc4
More endianness porting of the LUFA device mode class drivers.
...
Add endianness information to the class driver and core structure definitions.
Move out the unused Ethernet_Frame_Info_t structure definition to the RNDIS device demos where it is needed.
14 years ago
04660d3793
Seperate out the device demos and project's configuration descriptor structure definitions to clearly indicate what descriptors belong to which interface.
14 years ago
ca9f89ce82
Add new "checksource" target to the library makefiles, for automated source file existance checking.
14 years ago
57eedebd19
Fix Doxygen documentation errors.
14 years ago
7dffa15c16
Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.
14 years ago
f01a05415c
Spell check library source code files.
14 years ago
3cba88e4c0
Add RNDIS Device support to the Webserver project, so that the files stored on the device can be viewed from a web-browser while the board is plugged into a host machine.
14 years ago
9d733d44b4
Add new RNDIS_Host_IsPacketReceived(), RNDIS_Device_ReadPacket() and RNDIS_Device_WritePacket() functions to the Device RNDIS Class Driver.
...
Modify RNDIS demos to suit the simplified Ethernet_Frame_Info_t structure.
14 years ago
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
14 years ago
8f5ab27dc9
Use the MIN() macro where possible instead of manual "(x < y) ? x : y" constructs.
14 years ago
aba7932a5c
F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports.
14 years ago
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
14 years ago
5995c3f880
Oops - fix missing constants in the TempDataLogger FatFS diskio.h header file.
...
Add const to all project descriptor definitions for safety.
14 years ago
b1d7568651
Fix incorrect #include filenames in the RNDIS demos.
14 years ago
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
14 years ago
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
14 years ago
1d433d4506
Update copyright year on all source files.
14 years ago
a8b66f318d
Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.
14 years ago
c43605612d
Lower bulk endpoint polling rate in the descriptors to the lowest possible value to give maximum throughput.
14 years ago
50390867e7
Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).
14 years ago
fb76acb084
Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.
14 years ago
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
14 years ago
55538dcef3
Add descriptor class, subclass and protocol constants to the class drivers, modify all demos to use them where possible.
...
Move out private/internal host class driver constants to the common class driver headers, so that they can be used in the Low Level host mode demos.
Ensure all demos, projects and bootloaders use the class driver constants where possible to minimise code repetition.
14 years ago
b37d77eab3
All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included.
...
All LowLevel demos changed to use the constants and types defined in the USB class drivers.
14 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
14 years ago
b2a30cd48a
Added CDC functional descriptor structs to the Low Level CDC demos and CDC class bootloader, to improve the readability of the descriptors.
...
Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev).
14 years ago
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
14 years ago
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
14 years ago
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
14 years ago
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
14 years ago
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
14 years ago
Dean Camera