f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
14 years ago
cbafc306b2
Fixed incorrect endpoint initialisation order in the LowLevel DualVirtualSerial demo (thanks to Rick Drolet).
14 years ago
423d4018f0
Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy.
...
Minor documentation improvements.
14 years ago
b87d0b45a2
Added board hardware driver support for the Microsin AVR-USB162 development board.
14 years ago
cb298295fb
Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team).
14 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
14 years ago
b2a30cd48a
Added CDC functional descriptor structs to the Low Level CDC demos and CDC class bootloader, to improve the readability of the descriptors.
...
Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev).
14 years ago
a0f9192568
Minor documentation corrections.
14 years ago
66f14d44a3
Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev).
...
Simplify some of the LED driver functions to produce more compact code.
14 years ago
21954179a4
Added board hardware driver support for the USBFOO development board.
14 years ago
b369aa2cc6
Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett).
14 years ago
009eebf229
Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix incorrect call to ADC_Init() in the TemperatureDatalogger project.
14 years ago
ff09cf9c73
Fix XPLAINBridge project discarding characters from the USB interface due to a double read from the endpoint.
...
Make XPLAINBridge and USBtoSerial projects more reliable by forcing a flush if the UART-to-USB buffer becomes nearly full.
Reduce locking in the LightweightRingBuffer.h header files by only locking on the update of the buffer count, and require insertions and removals from each buffer to occur in only one execution thread.
Fix CDC_*_ReceiveByte() returning 0 when the interface is not configured, instead of the new -1 error value.
Fix CDC_Host_ReceiveByte() not re-freezing the pipe if no packet has been received.
Remove redundant Pipe token set commands in the CDC and RNDIS host class drivers.
14 years ago
1d4ff3695d
Oops - remove duplicated SPI driver init mask.
14 years ago
7cef08e10e
Fixed HID device class driver still using PrevReportINBuffer for GetReport control requests even when it has been set to NULL by the user application (thanks to Axel Rohde).
15 years ago
2b0e86243f
Add a new RFCOMM_ChannelOpened() callback event for when logical RFCOMM channels are opened in the BluetoothHost demo. Make the demo echo back sent characters to the remote device.
15 years ago
2eff731ecf
Add TEST RFCOMM command handler. Remove the RFCOMM channel UseUIFrame element, as the Bluetooth adaptions to RFCOMM only allow UIH frames to be used.
15 years ago
34e0fed4ca
Make the RFCOMM_SendFrame() function correctly generate frames from the input parameters, change addressing to use the raw DLCI address plus flags.
15 years ago
f606afefff
Remove void* arithmetic in the USB_GetNextDescriptor() static inline function, to make the header file C++ compatible once again. Implement workaround for an obscure GCC bug which can cause incorrect code generation under some circumstances when the void* is re-cast.
15 years ago
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
15 years ago
eed7d4df6a
Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so that the stream functions early-abort if the bus is suspended before or during a transfer.
15 years ago
d92e9133d3
Make bluetooth SDP code correctly unpack the search UUIDs and parameters.
...
Minor documentation improvements.
15 years ago
d4c421e380
Oops - make sure board driver dispatch headers test for the correct BOARD define values.
...
Add button support for the BENITO board target.
15 years ago
74353374c3
All Class Driver Host mode demos now correctly set the board LEDs to READY once the enumeration process has completed.
...
Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending a valid session ID to the device.
15 years ago
ce260ae786
Webserver project now uses the board LEDs to indicate the current IP configuration state.
...
Don't double-read data from the attached disk in the incomplete StandaloneProgrammer project when in host mode.
15 years ago
a61c7f671d
Minor documentation updates.
15 years ago
96a12cd12c
Add missing TWI_Init() call to the TemperatureDataLogger project. Make DUMMY_RTC compile time option the default, so that it works correctly on the USBKEY and other Atmel boards out of the box.
15 years ago
67cb070810
Fix HID Host Class driver sending incorrect ReportType values to the device when issuing requests via the control pipe.
15 years ago
8154331da6
Move DHCP negotiation timer into the DHCP connection application state structure, so that each connection gets its own timeout counter (only one connection currently used, but this way is more correct). Add const correctness to static data in the TELNETServerApp.c and HTTPServerApp.c files.
15 years ago
35a0fe9384
Fixed USB_GetHIDReportSize() returning the number of bits in the specified report instead of bytes.
...
Moved the USB_GetHIDReportItemInfo() calls into the main report item passing loop in the *HostWithParser demos - it is fast enough not to effect performance, and avoids duplicate code.
Make Webserver project report the LUFA version as part of the HTTP header.
15 years ago
1fdc0e664e
Make Webserver allow HTTP requests for files with up to 50 characters in the path instead of 30, to be in synch with the project documentation.
...
Change Webserver project's ENABLE_DHCP compile time option to ENABLE_DHCP_CLIENT to more accurately indicate its function.
15 years ago
15f84bb8f5
New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).
...
Spell-check code/comments in the Webserver/AVRISP-MKII projects.
15 years ago
84e1241f80
Replace the Webserver demo's uIP with the latest code ripped from the Contiki project by Adam Dunkels.
15 years ago
b0ce1eab66
Fix incorrect preprocessor checks in the PLL prescaler mask determination code for the ATMEGA32U2.
15 years ago
6122ba93cf
Fix MassStorageKeyboard demo USE_INTERNAL_SERIAL check being performed before the required library headers were included, causing a compilation error.
...
Added notes to the class driver functions indicating which functions require what Device/Host state machine states to function.
15 years ago
71e5bcee3d
Fixed blocking CDC streams not aborting when the host is disconnected.
15 years ago
93fe420d89
Minor documentation updates.
15 years ago
d4ca7fb44c
Fix MIT license language to make its intent clearer.
15 years ago
d1608d4af3
Added const where possible to the source functions in the Projects directory.
...
Added command timeout to the AVRISP project so that incorrectly connected targets no longer freeze the device.
Removed string descriptors from the TeensyHID bootloader to reduce its size.
15 years ago
cda88cf97c
Start of implementation of the low level TPI programming protocol in the AVRISP project.
15 years ago
2f6c096050
Complete initial working revision of PDI programming in the AVRISP project (XMEGAs can now be programmed by the firmware).
15 years ago
04774208b6
Minor code cleanups for clarity.
15 years ago
f93f732108
Update DevChapter9.c - use the Endpoint_ClearStatusStage() function where possible to reduce code size and (potentially) allow for centralized status stage timeouts.
...
Fix Joystick device demo HID descriptors - buttons should be placed outside the Pointer collection.
15 years ago
bdedbd558c
Add new MIDIHost LowLevel demo application.
...
Make unfinished device mode applications use the VID/PID reserved for LUFA development devices.
15 years ago
433399b05d
Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer samples to and from the device (allowing more time for processing and output).
...
Fixed ClassDriver AudioOutput demo not selecting an audio output mode.
15 years ago
3ecc462954
Added pinouts to the AVRISP project for a standard ISP 6 Pin header to make construction of a standard ISP programmer easier.
15 years ago
064e6a2f32
Changed Still Image Host class driver to auto-fill TransactionID element of sent headers depending on the current session state.
...
CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker).
The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.
15 years ago
df5500e81c
Added CDC_Device_Flush() command to the CDC Device mode class driver.
...
Minor updates to the unfinished SideShow demo for clarity.
Added unfinished MassStorageHost class driver demo.
15 years ago
a2001ac1cc
Fixed swapped paremeters in the HID state memory copy call while processing a HID PUSH item in the HID report parser.
...
Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed.
Make RNDIS device class driver include the CDC device class driver header, so that it can inherrit the required CDC functional descriptor macro.
Make HID host class driver include the HID report parser.
15 years ago
Dean Camera