84ff878fd7
Fix errors uncovered by the new build test compile warnings; fix UC3 pipe configuration function broken, redundant function prototypes and unused parameters.
13 years ago
50ff97f378
All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance.
13 years ago
1132488e8f
Add build tests to verify correct compilation of as many modules as possible under as many architectures as possible.
...
Fix broken compilation of LUFA under C++ compilers when the Serial peripheral module header file is included in a C++ source file.
Fix missing semicolon in the UC3 architecture host pipe functions.
Fix failed compilation for the XMEGA architecture if USB_DEVICE_ONLY us not specified.
13 years ago
9d2e7aeff4
Add missing file Subversion EOL-style properties.
13 years ago
7a8b038687
Fix Dataflash driver for the XMEGA-B1 XPLAINED - the Dataflash is connected to the USART module, but requires physical port remapping.
13 years ago
01a80df6c2
Minor documentation improvements.
13 years ago
5051df08d7
Minor documentation improvements.
13 years ago
09d2be0dc1
Add new Master SPI Mode USART serial peripheral driver for the XMEGA and AVR8 architectures.
...
Modify board Dataflash drivers so that each individual board is responsible for including the correct peripheral driver (SPI or SerialSPI) based on the board connections to the Dataflash chip.
Complete A3BU-XPLAINED and B1-XPLAINED board Dataflash drivers.
13 years ago
f45d60f768
Added Serial USART peripheral driver for the XMEGA platform.
...
Fix XMEGA SPI peripheral driver's incorrect const-ness on the SPI peripheral struct.
13 years ago
82fdedc192
Minor documentation improvements.
13 years ago
81bd8f2f83
Clean up the Audio Device class driver control request Endpoint match logic.
13 years ago
2180f57d17
Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage.
13 years ago
385ffb6de3
Fix XMEGA architecture not correctly resetting the device address and endpoints in response to a USB bus reset from the host.
13 years ago
a2d18e46f8
Update XMEGA board drivers to use the port inversion feature of the XMEGA architecture rather than performing the inversion in software. Add partially completed XMEGA-B1-XPLAINED Dataflash board driver and revert implementation of the XMEGA-A3BU-XPLAINED Dataflash driver as the chip is connected to the USART, not the SPI interface.
13 years ago
c60897df39
Allow serial strings to be generated on the older AVR8 devices which do not explicitly state they contain unique values in the datasheet, as this appears to be implemented in hardware.
13 years ago
1482f77826
Oops - XMEGA-B1 Xplained LEDs are on PORTB and PORTE, not PORTF and PORTE.
13 years ago
4d131de85b
Add board driver support for the Atmel XMEGA-B1 Xplained board.
...
Fix Dataflash driver for the A3BU-Xplained board.
Minor documentation improvements.
13 years ago
fdab3aef86
Add (still preliminary) support for the ATXMEGA64A4 and ATXMEGA128A4. Fix minor error in the AVRISP-MKII clone project descriptors.
13 years ago
da676f0f70
Add support for the Micropendous (Arduino-like) series of boards (revisions 1 and 2).
13 years ago
a677254026
Added INVERTED_VBUS_ENABLE_LINE and NO_AUTO_VBUS_MANAGEMENT compile time options (thanks to Opendous Inc.).
13 years ago
e55946f972
Add missing svn:eol-style properties to /trunk/.
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
64e9361298
Minor corrections to the XMEGA USB controller implementation.
13 years ago
3dacb73af3
Fix errors in the new Micropendous board drivers. Reorder the board definition macro indexes so that misspelled board names default to BOARD_USER rather then BOARD_USBKEY.
13 years ago
10a56f6105
Add support for the Micropendous series of USB AVR8 boards.
13 years ago
a436fbb612
Minor documentation improvements.
13 years ago
fc4d3ab400
Minor documentation improvements.
13 years ago
5563da6a62
Added new LEDs_Disable(), Buttons_Disable() and Joystick_Disable() functions to the board hardware drivers.
13 years ago
a147cee95f
Added new CALLBACK_Audio_Device_GetSetInterfaceProperty() callback to the Audio Device Class driver.
13 years ago
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
13 years ago
154d28e39f
Fixed incorrect implementation of LEDs_ToggleLEDs() for the Adafruit-U4 board (thanks to Caroline Saliman).
13 years ago
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
13 years ago
676de74d9b
Don't validate the Device Descriptor's vendor ID when validating that a device is an Android Accessory device; the Product ID and (later) Accessory protocol support is enough to probe AOA class support without having to maintain a list of Android device manufacture VID values.
13 years ago
84a739ae72
Minor XMEGA USB driver fixes.
13 years ago
ec3e47a7d0
Change PIPE_PIPENUM_MASK from 0x07 to the more generic 0x0F to allow for full pipe address support in USB host architectures other than the current AVR8 devices. Minor documentation improvements.
13 years ago
0c59d5993e
Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached device can be recovered from automatically without having to reset the Mass Storage interface.
...
Altered the Mass Storage Host LowLevel demo so that SCSI data STALLs from the attached device can be recovered from automatically without having to reset the Mass Storage interface.
13 years ago
259a3c9854
Fix typo in the Joystick board driver documentation example code.
13 years ago
70f3d8e933
Add support for the Paranoid Studio USB2AX boards (hardware revisions 1-3).
13 years ago
2b23318357
Add dummy board documentation nodes for the XPLAIN_REV1 and TEENSY2 meta board targets.
13 years ago
cdd4e11fa8
Oops - fix incorrect value of AOA_CSCP_AOADataSubclass in the Android Open Accessory class driver.
13 years ago
38d7cdf803
Minor Doxygen documentation improvements.
...
Add missing ATTR_NON_NULL_PTR_ARG and const decorations.
13 years ago
3b99abb5fc
Add new USB_Host_GetDescriptor() function. Alter the USB_Host_GetDeviceDescriptor() and USB_Host_GetDeviceStringDescriptor() convenience functions so that they wrap the new function.
13 years ago
e915d968a5
Added new USB_Host_GetDeviceConfiguration() and USB_Host_GetInterfaceAltSetting() functions.
13 years ago
7f8dbb4908
Convert the LowLevel AndroidAccessory demo to use the new class driver constants to reduce code duplication.
...
Add missing Doxygen documentation.
13 years ago
8b5aa61601
Add new Android Open Accessory class driver to the library core and add a new Android Open Accessory Host ClassDriver demo.
13 years ago
a81ccd83fd
Added support for version 2 of the Teensy boards (thanks to Christoph Redecker).
13 years ago
09577fe541
Add XMEGA compile time tokens to the LUFAConfig.h code template.
...
Add additional compile time errors to the XMEGA and AVR8 architectures if multiple USE_*_DESCRIPTORS compile time tokens are enabled.
Add support for the NO_INTERNAL_SERIAL compile time token on the XMEGA targets.
13 years ago
b711b7d6a4
Fixed broken AVR32 endpoint/pipe communications when ORDERED_EP_CONFIG compile time option is not enabled (thanks to Matthias).
...
Fixed broken compilation for the AVR32 devices if the NO_SOF_EVENTS compile time option was not enabled (thanks to Matthias).
13 years ago
eb2e883fd3
Added Class, ClassDevice, ClassHost and ClassCommon to the internal class driver source filenames to prevent ambiguities.
13 years ago
Dean Camera