2ae41fb153
Added endian-correction to the CDC driver's Line Encoding control request handlers.
14 years ago
3bb8055459
Fix compile errors for the USB XMEGA parts when the USB driver is used.
...
Add core support for the ATXMEGA64A1U.
Minor documentation corrections.
14 years ago
3223786c49
Fix compile error on the UC3 targets when INTERRUPT_CONTROL_ENDPOINT compile time option is used (thanks to Ian Woloschin).
...
Small size improvement for Little Endian devices when USB host mode is used.
Minor documentation fixes.
14 years ago
022fa26b43
Fix missing C++ linkage command in ArchitectureSpecific.h.
...
Fix missing closing brace in an Endpoint function for the UC3 targets.
14 years ago
99ff27e403
Fixed HID Parser's largest report size bit count not including the size of the last parsed report item.
...
Fixed HID host driver's largest HID report size count corrupt when the number of report bits exceeds 255.
14 years ago
3b898ae178
Remove redundant prototype for Audio_Host_StartStopStreaming() and Audio_Host_GetSetEndpointProperty(). Update host mode Audio class inline functions to prevent unused parameter warnings.
14 years ago
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
14 years ago
c505ba047f
Set HOST_DEVICE_SETTLE_DELAY_MS to zero for the incomplete AndroidAccessoryHost demo to prevent a timeout on the Android device from aborting Accessory mode after a command it sent to switch modes (thanks to Opendous Inc).
14 years ago
6c4f736793
Minor documentation and style fixes.
15 years ago
04660d3793
Seperate out the device demos and project's configuration descriptor structure definitions to clearly indicate what descriptors belong to which interface.
15 years ago
dee4bc0973
Fix logic bug in the incomplete Android Accessory Host demo preventing correct detection of an attached Android Accessory Mode device.
15 years ago
d8fe01f19a
Rename new Audio class driver functions, callbacks and events to ensure that they contain the USB mode (Device or Host) in the function names.
15 years ago
a85fa30bf1
Minor documentation fixes.
15 years ago
7b0cebc1d7
Add new LUFA powered user projects to the documentation.
15 years ago
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
15 years ago
2efa79d3ec
Conditionally add available address spaces to the address space enum, for multiple address space architectures.
...
Update Doxygen configuration file for the latest Doxygen release.
Minor documentation updates.
15 years ago
aba7932a5c
F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports.
15 years ago
1a130eed6c
Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point instead of starting point, to give maximum reliability (thanks to Anton).
15 years ago
c8a438d66c
Add structure padding to the appropriate descriptor structures to maintain correct alignments on larger architectures.
...
Fix EVK1101 swapped joystick Right/Down masks.
15 years ago
8c6f26e19d
Add in USB_INT_RegisterHandlers() internal function to register the interrupt handler routines used by LUFA. Add dummy loads after clearing the interrupt lines according to the datasheet.
...
Add in temporary global interrupts enable/disable macros.
15 years ago
6f01b6afd5
More UC3B architecture port updates.
15 years ago
100a197d0e
Reduced latency for executing the Start-Of-Frame events (if enabled in the user application).
15 years ago
4344b0621d
Added board driver support for the Sparkfun ATMEGA8U2 breakout board.
15 years ago
088bfb10b2
Change bootloader makefiles to automatically compute the bootloader starting address from a flash size and bootloader section size, expressed in KB.
15 years ago
279e1b6ece
Fixed programming errors in the AVRISP-MKII project when the programming packet is a round multiple of the endpoint bank size under avrdude (thanks to Steffan Woltjer).
15 years ago
a852ea8e43
Added new KeyboardMouseMultiReport Device ClassDriver demo.
...
Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used.
Added new MAX() and MIN() convenience macros.
15 years ago
6d67b1df3c
Change over Joystick demo HID report descriptor to use USAGE_MINIMUM and USAGE_MAXIMUM when describing the joystick buttons, to allow for easy extension of the number of supported buttons.
15 years ago
26017b68b0
Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0 for other uses in the future.
15 years ago
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
15 years ago
cbafc306b2
Fixed incorrect endpoint initialisation order in the LowLevel DualVirtualSerial demo (thanks to Rick Drolet).
15 years ago
423d4018f0
Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy.
...
Minor documentation improvements.
15 years ago
b87d0b45a2
Added board hardware driver support for the Microsin AVR-USB162 development board.
15 years ago
cb298295fb
Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team).
15 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
15 years ago
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
15 years ago
b2a30cd48a
Added CDC functional descriptor structs to the Low Level CDC demos and CDC class bootloader, to improve the readability of the descriptors.
...
Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev).
15 years ago
a0f9192568
Minor documentation corrections.
15 years ago
66f14d44a3
Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev).
...
Simplify some of the LED driver functions to produce more compact code.
15 years ago
21954179a4
Added board hardware driver support for the USBFOO development board.
15 years ago
b369aa2cc6
Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett).
15 years ago
009eebf229
Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix incorrect call to ADC_Init() in the TemperatureDatalogger project.
15 years ago
ff09cf9c73
Fix XPLAINBridge project discarding characters from the USB interface due to a double read from the endpoint.
...
Make XPLAINBridge and USBtoSerial projects more reliable by forcing a flush if the UART-to-USB buffer becomes nearly full.
Reduce locking in the LightweightRingBuffer.h header files by only locking on the update of the buffer count, and require insertions and removals from each buffer to occur in only one execution thread.
Fix CDC_*_ReceiveByte() returning 0 when the interface is not configured, instead of the new -1 error value.
Fix CDC_Host_ReceiveByte() not re-freezing the pipe if no packet has been received.
Remove redundant Pipe token set commands in the CDC and RNDIS host class drivers.
15 years ago
1d4ff3695d
Oops - remove duplicated SPI driver init mask.
15 years ago
7cef08e10e
Fixed HID device class driver still using PrevReportINBuffer for GetReport control requests even when it has been set to NULL by the user application (thanks to Axel Rohde).
16 years ago
2b0e86243f
Add a new RFCOMM_ChannelOpened() callback event for when logical RFCOMM channels are opened in the BluetoothHost demo. Make the demo echo back sent characters to the remote device.
16 years ago
2eff731ecf
Add TEST RFCOMM command handler. Remove the RFCOMM channel UseUIFrame element, as the Bluetooth adaptions to RFCOMM only allow UIH frames to be used.
16 years ago
34e0fed4ca
Make the RFCOMM_SendFrame() function correctly generate frames from the input parameters, change addressing to use the raw DLCI address plus flags.
16 years ago
f606afefff
Remove void* arithmetic in the USB_GetNextDescriptor() static inline function, to make the header file C++ compatible once again. Implement workaround for an obscure GCC bug which can cause incorrect code generation under some circumstances when the void* is re-cast.
16 years ago
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
16 years ago
eed7d4df6a
Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so that the stream functions early-abort if the bus is suspended before or during a transfer.
16 years ago
Dean Camera