04263de4f0
Fix definition of pgm_read_ptr().
14 years ago
995195a2b0
Add missing function attributes to the pipe/endpoint functions for all architectures.
...
Perform endianness correction in the HID report parser for big-endian platforms.
14 years ago
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
14 years ago
d08116b02f
Create a new Common module documentation group for the new Global Interrupt macros.
14 years ago
c263ea837a
Move global interrupt enable/disable functions out to Common.h and document them.
14 years ago
de9bd767dc
Correct UC3 global interrupt functions.
...
Replace all calls and references to _delay_ms() in the code with the architecture-agnostic Delay_MS() function.
Improve code generation for the Delay_MS() function on the AVR8 architecture when called with a constant input.
14 years ago
70284d390f
Add in a new common Delay_MS() function, which provides a blocking delay for all architectures.
...
Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.
Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.
14 years ago
f595043584
Add in new architecture attribute defines to selectively remove the EEPROM and FLASH memory space functions on architectures which do not have seperate memory address spaces.
14 years ago
5eb1862d54
Remove redundant Doxygen guards from the internal preprocessor definitions.
14 years ago
944e0d2009
Rename UC3B driver files to UC3, as they are generic to all AVR32 UC3 models.
14 years ago
6005a42150
Add experimental support for the UC3A0, UC3A1 and UC3A3 series AVR32 microcontrollers.
14 years ago
f301a4a21f
Oops - rename misnamed Endianess.h header file.
...
Remove UC3B temp macros related to EEPROM, to ensure that projects requiring this break at compile time rather than at runtime until a solution can be found.
14 years ago
b1528a1256
Move out endianness management macros into a new common Endianness.h header.
...
Fix Doxygen documentation, broken due to the added ATTR_PACKED attribute on some structs breaking the Doxygen parser.
14 years ago
e4b3e3fc65
Fix UC3B architecture compile errors and ensure the architecture can be compiled with no special makefile tokens defined.
14 years ago
b763c3f33e
Porting updates for the UC3B architecture - get UC3B partially enumerating using a modified mouse demo on the EVK1101. Implement a software FIFO for the endpoint banks; datasheet hints that this can be done through hardware as on the AVR8 architecture, but the correct method to do this not discovered yet.
14 years ago
8c6f26e19d
Add in USB_INT_RegisterHandlers() internal function to register the interrupt handler routines used by LUFA. Add dummy loads after clearing the interrupt lines according to the datasheet.
...
Add in temporary global interrupts enable/disable macros.
14 years ago
4a3b70e727
Fix USB Host mode compile errors for the UC3B architecture.
14 years ago
381dd0d490
Move out common architecture-independent core definitions into the appropriate core dispatch header files.
14 years ago
f3f481183a
More AVR32 UC3B architecture ports - USB device mode applications can now be sucessfully compiled, although they will be currently non-functional.
14 years ago
a318f32b31
Update board driver common APIs to use uint_reg_t.
14 years ago
cad5e9ffca
Added start of a port of the core USB driver code to the AVR32 UC3B architecture.
14 years ago
f3ec62b5c6
More updates to remove architecture-specific comments from the documentation, alter USBMode.h preprocessor logic to support future architectures more easily.
14 years ago
28a1ee29a1
More Doxygen updates for multiple architecture support.
14 years ago
5e73190582
Start update of documentation to support possible multiple architectures in the future - alter \file documentation to automatically copy in the module documentation where possible.
14 years ago
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
14 years ago
a852ea8e43
Added new KeyboardMouseMultiReport Device ClassDriver demo.
...
Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used.
Added new MAX() and MIN() convenience macros.
14 years ago
7dc3d3a68f
Minor documentation improvements.
14 years ago
1d433d4506
Update copyright year on all source files.
14 years ago
6026b9128b
Fix compile errors from the changes to the SerialStream and board Temperature drivers.
14 years ago
2073b96d82
Added basic driver example use code to the library documentation.
...
Made the USARTStream global public and documented in the SerialStream module, allowing for the serial USART stream to be accessed via its handle rather than via the implicit stdout and stdin streams.
14 years ago
39ac72f2d1
Make a new general RingBuffer.h misc library driver, instead of the per-application LightweightRingBuff.h ring buffers. Change over projects to use the new driver.
...
Add ORDERED_EP_CONFIG to the device Projects (only) that use only a single class driver, or where the endpoint ordering is fixed, to save on compiled binary size.
Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointers.
14 years ago
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
14 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
14 years ago
612df774d9
Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.
14 years ago
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
14 years ago
28401f7bb7
Spell check all source files once again to find any typos.
14 years ago
97143bf814
Add missing const qualifiers to class drivers.
...
Indent core library function parameters so that there is only one parameter per line, to increase readability.
14 years ago
99d8a39363
Move and rename DevChaper9.c/.h and HostChapter9.c/.h to the HighLevel directory, new named DeviceStandardReq.c/.h and HostStandardReq.c/.h.
...
Rename LowLevel.c/.h to USBController.c/.h.
Remove dependancies on the complete <avr/io.h> header in the HighLevel USB driver directory, to ensure less work is required in later (possible) ports.
14 years ago
c326fe9605
Rewrote the implementation of the SwapEndian_16() and SwapEndian_32() functions so that they compile down in most instances to minimal loads and stores rather than complicated shifts.
...
Fixed SCSI.c implementations of all the demos/projects casting the block count to a 32-bit temporary before calling SwapEndian_16().
15 years ago
e621ab33be
Added new pgm_read_ptr() macro to Common.h for reading of pointers out of flash memory space.
...
Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time.
15 years ago
deed746d37
Renamed SERIAL_STREAM_ASSERT() macro to STDOUT_ASSERT().
...
Minor tweaks to the library documentation.
15 years ago
23a94a7181
Fix byte ordering of UUIDs in the SDP server - host can now successfully pair to the Bluetooth device and discover the exposed Serial Port Profile RFCOMM service.
15 years ago
c362709a1e
The SDP UUID lists should be searched and ALL UUIDs matched for a record to be retrieved, not partial matches. Change the SDP code so that the entire list must be matched against a service attribute table's contents before it is returned.
...
Change matching algorithm so that it recursively searches through the entire attribute table, and not just pre-specified sequence attributes.
Add browse lists and proper descriptions to the Serial Port service.
15 years ago
328ed71ce7
Fix spacing of the function parameter descriptions in the Doxygen documentation.
15 years ago
c1daecf18b
Fixed incorrect signature for the ATMEGA32U2 in the DFU bootloader (thanks to Axel Rohde).
...
Partial fix to the Bluetooth SDP code - data should be encoded in big endian, not little endian.
15 years ago
4a13a5484a
Fixed RNDISEthernet demos crashing when calculating checksums for Ethernet/TCP packets of more than ~500 bytes due to an overflow in the checksum calculation loop (thanks to Kevin Malec).
...
Removed string Attributes from the Service Discovery Protocol code to minimise the potential points of failure while the base code is being debugged.
15 years ago
8f3d4e69c3
Add UUID Class matching to the Service Discovery Protocol code - SDP is now correctly matched against the generic Service Discovery Class UUID.
15 years ago
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
15 years ago
9e34144c9b
Use puts_P() and printf_P() instead of the normal variants where possible in the Host mode Class Driver demos.
15 years ago
Dean Camera