9ffeac6992
Update code and StaticAnlysisTest so that missingInclude warnings do not have to be suppressed, and so that all code except for third party libraries can be checked.
...
Update SingleUSBModeTest makefile to separate out the messages from the test commands.
13 years ago
e408f92b26
Minor documentation improvements.
13 years ago
7416ebd7c6
Update StaticAnalysisTest to check for missing header files. Fix found incorrect header file paths in the demos and projects.
13 years ago
bb85d083a7
Fix warnings and errors found by the new cppcheck provided static code analysis.
13 years ago
b7f4370c8e
Oops - don't reset AVRISP-MKII timeout in XPROG mode, as this is synchronous serial and data is always received regardless of attached or non-attached target.
13 years ago
7a1033025b
Minor documentation fixes.
...
Make an explicit constant name for the CMDEX bit of the target's NVM command register in the AVRISP-MKII Clone project.
13 years ago
18b82b3575
Updated the AVRISP-MKII Clone programmer project to be compatible with the latest version of AVR Studio (version 5.1).
...
Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent warnings in AVR Studio 5.1 when programming XMEGA devices.
13 years ago
fdab3aef86
Add (still preliminary) support for the ATXMEGA64A4 and ATXMEGA128A4. Fix minor error in the AVRISP-MKII clone project descriptors.
13 years ago
252bd7bb2c
Fixed invalid PID value used in the TempDataLogger project host application (thanks to Anupam Pathak).
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
df33278d91
Minor documentation corrections.
13 years ago
fc4d3ab400
Minor documentation improvements.
13 years ago
956f9e3709
Fixed AVRISP-MKII Clone timing out on long programming commands such as programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling).
13 years ago
dd312cead4
Make all AVRISP-MKII programmer parameters readable, since there's no real good reason to restrict parameter reads. Fix misspelt target reset polarity EEPROM variable.
13 years ago
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
13 years ago
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
13 years ago
798cc84ff5
Fixed AVRISP-MKII Clone failing to start application firmware once a TPI programming session is exited.
13 years ago
24ca2d49fe
Bit-bang ISP in the AVRISP-MKII clone project needs to set MOSI pin to the MSB of the data byte on startup, not the LSB.
13 years ago
eb2e883fd3
Added Class, ClassDevice, ClassHost and ClassCommon to the internal class driver source filenames to prevent ambiguities.
13 years ago
e30be658c9
Add missing SVN eol-style property to ensure that source code line endings and converted to the native values on checkout.
13 years ago
46aea9d4ce
Update the incomplete StandaloneProgrammer project to be compatible with the latest LUFA core API.
13 years ago
b057041660
Use strcat() in the HTTPServer project instead of using strcpy() and strlen().
13 years ago
6564416479
Update host C# applications for VS2010. Make LEDNotifier project host applications only display valid COM port names for the PC it is run on, rather than all possible port names. Add missing property files to the TempDataLogger project host application.
13 years ago
eb5b8a32e4
Added INVERTED_ISP_MISO compile time option to the AVRISP-MKII clone project (thanks to Chuck Rohs).
13 years ago
ab43251bf9
Minor documentation fixes.
13 years ago
3aa8a69246
Fixed AVRISP-MKII Clone compile warning on AVR8 U4 targets even when NO_VTARGET_DETECT is enabled.
13 years ago
c6d6bdae0a
Added reliability patches to the AVRISP-MKII Clone project's PDI/TPI protocols (thanks to Justin Mattair).
13 years ago
db73b11244
Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair).
13 years ago
b5682f2c44
Add project name to the Doxygen makefile target output.
13 years ago
aae59857a2
Add const qualifier to all PROGMEM data to prevent warnings in newer AVR-GCC compiler versions.
13 years ago
d881e0cbf6
Fixed incorrect buffer size check in the USBtoSerial project (thanks to Yuri A Nikiforov).
13 years ago
e64f4b0cd9
Update the TempDataLogger project and driver documentation to use the new TWI_BITLENGTH_FROM_FREQ() macro.
13 years ago
9708b45e69
Minor documentation corrections.
13 years ago
fc5fa769ef
Pull out architecture specific macros and other definitions into a new common header file. Add new JTAG_DISABLE() macro for the AVR8s to software-disable JTAG debugging using cycle-safe assembly code.
13 years ago
ef4cff29c3
Fix TempDataLogger project logging interval always being 500ms more than the requested interval.
13 years ago
aceb015ea7
Fixed incorrect Dataflash buffer use in the DataflashManager_WriteBlocks_RAM() function of several demos/projects (thanks to Jeremy Willden).
13 years ago
025742fca8
Added new VTARGET_USE_INTERNAL_REF configuration option to the AVRISP-MKII clone project (thanks to Volker Bosch).
13 years ago
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
13 years ago
0c2ad9eb34
Add missing SVN eol-style property to files where it was missing.
14 years ago
3309c00a99
Minor demo/project documentation and style fixes.
14 years ago
d9c16402b9
Add missing device deconfiguration-on-error statements to the host mode demos and projects.
14 years ago
137ce280c1
Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration instead of manual host state machine manipulations in the main application task.
...
Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device.
Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to, by changing the USB_* prefix to USB_Device_* or USB_Host_*.
Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required.
Altered the USB_Host_SetDeviceConfiguration() function to update the new USB_Host_ConfigurationNumber global as required.
Moved out the Host mode standard request convenience/helper functions from the architecture specific Host driver files to the architecture agnostic HostStandardReq.c driver file.
14 years ago
7932ce86bd
Add the GCC -fno-split-wide-types compile time option to some of the larger user projects to reduce the compiled application size.
14 years ago
a09e1cb53b
Switch the HTTP Webserver project to use the safer strlcpy() instead of strncpy() to save on manual null-termination.
14 years ago
04660d3793
Seperate out the device demos and project's configuration descriptor structure definitions to clearly indicate what descriptors belong to which interface.
14 years ago
b162540099
Minor documentation fix for the RelayBoard project.
14 years ago
ca9f89ce82
Add new "checksource" target to the library makefiles, for automated source file existance checking.
14 years ago
dab7e06a4a
Split HIDReportViewer project sub-components into seperate functions for readability/convenience.
14 years ago
ea3b5c7423
More cosmetic data output changes to the HIDReportViewer project.
14 years ago
Dean Camera