With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
* Refactor jj40 in line with current ps2avrgb template
* Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID
* Add backlight pwm bodge till #4324 lands
* Increase planck keymap compatibility
* Add customizable tapping terms
* Add Documentation
* Fix function
* Fixes
* It's not a pointer
* Add debugging output
* Update documentation to be at least vaguely accurate
* Use `get_tapping_term(tapping_key.event)` instead
`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.
However `tapping_key.event` actually gives the correct column and row information. It appears be the correct structure to use.
In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h
* Use variable tapping term value rather than define
* Silly drashna - tapping_key.event, not event
* add get_event_keycode() function
* Fix typo
Co-Authored-By: drashna <drashna@live.com>
* Remove post_process_record_quantum since it's the wrong PR
* Update quantum/quantum.c
Co-Authored-By: drashna <drashna@live.com>
* Better handle ifdef statement for permissive hold
Since we can't be sure that tapping term is actually 500
* Update quantum.c comments based on feedback
* Clean up get_tapping_term function
Clean up function so that users don't need to call the event function, and instead only check the keycode
* Add ability to run functionality on and off
* Make ifdef's more compact
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance
* Updating effect function api for future extensions
* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary
* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
* Draft commit of typing speed RGB control
* More information in the readme
* Support all RGB animation modes (Fixes#1)
* Added support for all RGB light modes to use typing speed
Except christmas lights because that is seizure-inducing at high speeds!
* Introduced a value range specific to each RGB mode
Because some modes are a little too much when running at full speed!
* Update readme.md
* Update readme.md
* Re-arrange typing_speed definitions (Fixes#5) (#6)
* Re-arrange variable definitions to avoid including quantum.h from rgblight.c
* Fix a compilation error when trying to run make test:all
* Tweaks to the typing speed decay rate
* Renamed to momentum; moved implementation into dedicated files
* Groundwork for toggling momentum on/off (currently always on)
* Add EEPROM toggle for momentum-matching
* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic
* Move momentum decay task out of rgblight_task()
* Fix missing momentum.h in lufa.c
* Experimental LED support (untested)
* Draft commit of typing speed RGB control
* More information in the readme
* Support all RGB animation modes (Fixes#1)
* Added support for all RGB light modes to use typing speed
Except christmas lights because that is seizure-inducing at high speeds!
* Introduced a value range specific to each RGB mode
Because some modes are a little too much when running at full speed!
* Update readme.md
* Update readme.md
* Re-arrange typing_speed definitions (Fixes#5) (#6)
* Re-arrange variable definitions to avoid including quantum.h from rgblight.c
* Fix a compilation error when trying to run make test:all
* Tweaks to the typing speed decay rate
* Renamed to momentum; moved implementation into dedicated files
* Groundwork for toggling momentum on/off (currently always on)
* Add EEPROM toggle for momentum-matching
* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic
* Move momentum decay task out of rgblight_task()
* Fix missing momentum.h in lufa.c
* Added documentation
* Renamed feature to velocikey
* Reverted readme to original state
* Correct the readme title
* Updated feature name in the docs
* Update EECONFIG name
* Add compile-time toggles for velocikey
* Update feature documentation
* Revert "Merge branch 'led-support' into master"
This reverts commit e123ff5feb, reversing
changes made to df111a55b9.
* Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE
* Rename decay_task function to decelerate
* Apply suggestions from code review
Co-Authored-By: chrislewisdev <chris@chrislewisdev.com>
* Re-order eeconfig definitions
* Apply coding conventions
* Apply #ifdef check in lufa.c
* Refactored interval time checks into one functionc
* Small rename
* Fix unused function error for layouts not using all rgb effects
* Only update EEPROM if Velocikey is enabled
* Incorporate code review feedback
* Small adjustment to top-end decay rate
* Add Velocikey documentation to table of contents
* Bring tetris:default keymap size down by disabling audio
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards
* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom
* haptic enhancement - eeprom and modes added
* Added set and get functions for haptic feedback
* initial implementation of solenoids under haptic feedback
* changed eeprom to 32 bits to reserve blocks for future features
* start documentation of haptic feedback
* change keycode per comment from reviewers
* typo fixes
* added eeprom for solenoid configs
* added solenoid and docs
* Add/fix default parameters configs, improve docs
* more doc cleanup
* add in solenoid buzz toggle, clean up doc
* some fixes for error in compiling solenoid
* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c
* fixes for avr side issues
* update keymap
* fix keymap compile error
* fix bugs found during solenoid testing
* set pin that is not powered during bootloader
* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
* Improvement of Space Cadet Shift by preventing to automatically apply a modifier on the key and allow to override the default modifier. Closesqmk/qmk_firmware#3815
* Improve the use of the DISABLE_SPACE_CADET_MODIFIER flag to avoid unregistering KC_LSFT when equals to LSPO_MOD
* change #if to if statement
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Use backlight toggling as Caps Lock LED
I've implemented this feature because S65-X doesn't have LED indicators
and the existing led_set_kb(usb_led) function try to use backlight as
indicator but that creates an inconsistency with backlight_config state.
- define `BACKLIGHT_CAPS_LOCK_INDICATOR` to enable Caps Lock indicator
using backlight (for keyboards without dedicated LED)
- Don't turn off LED indicators when suspend because backlight is
already turned off. Else led_set(0) will turn back on backlight.
- Documentation has been updated
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Turn off all LED indicators except Caps Lock if BACKLIGHT_CAPS_LOCK_INDICATOR
* [BACKLIGHT_CAPS_LOCK] Rename BACKLIGHT_CAPS_LOCK_INDICATOR
* [BACKLIGHT_CAPS_LOCK] Use new IS_LED_ON method
I think `quantum.h` should contain only API declarations that `quantum.c` provides externally. `rgb.h` contains function weak definitions. This should not be in `quantum.h`.
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* remove merge artifacts
* Unicode common cleanup (#17)
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix white spaces
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Rearrange process_unicode_common functions
* Make Unicode input mode constants (UC_*) an enum
* Simplify unicode_input_start/finish code
* Make the key used for WinCompose configurable
* Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY
* Update Unicode input mode doc
* Add descriptions and rearrange definitions in process_unicode_common.h
* Add registry command to Unicode docs + misc updates
* Reword an explanation in Unicode docs
* Add TODO comment
* Remove trailing whitespace
* Improve Cycling documentation
* Add Unicode Input method Cycling support (#19)
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix white spaces
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Rearrange process_unicode_common functions
* Make Unicode input mode constants (UC_*) an enum
* Simplify unicode_input_start/finish code
* Make the key used for WinCompose configurable
* Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY
* Update Unicode input mode doc
* Add descriptions and rearrange definitions in process_unicode_common.h
* Add registry command to Unicode docs + misc updates
* Reword an explanation in Unicode docs
* Add TODO comment
* Add cycle_unicode_input_mode and UNICODE_SELECTED_MODES macro
* Add an option for making cycle changes persistent
* Add debug prints to functions that change input_mode
* Use cycle_unicode_input_mode in whitefox/konstantin
* Add persist_unicode_input_mode function
* Add offset to cycle to allow stepping in reverse
* Add keycodes: UNICODE_MODE_FORWARD, UNICODE_MODE_REVERSE
Aliases: UC_MOD, UC_RMOD (respectively)
* REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts
* Fix wrong constant name
* Revert "REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts"
This reverts commit 42676bf251.
* Change dprintf text
* Give selected modes priority over EEPROM when !UNICODE_CYCLE_PERSIST
* Remove trailing whitespace
* Cleanup of RALT code and unicode compilation stuff
* Remove else for unicode handling
* Add delay in Tap Code to avoid issues
I think a few people have reporting issues with it working properly, and it may be a timing issue. The 'register_code' uses this sort of delay in some of the functions, and
this is probably why.
Adding the 100ms delay should hopefully fix any issues with it.
* Make tap_code delay configurable
* Update documentation
* Bring tap_code16 inline with changes
* Fix type for tap_code16
Bad copy-paste job
* Just use the value check for the define
* Clarify timing in docs
Co-Authored-By: drashna <drashna@live.com>
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Preliminary additon of bootmagic lite functionality
* Cleanup code
* Clean up bootmagic code
* Add documentation and clean up code
* Make 'lite' an option for BOOTMAGIC_ENABLE
* Update Templates with note about Bootmagic Lite option
* Detect Debounce variable
* Make sure debounce is a non-zero number
* Capitalize Bootmagic
* Capitalize bootmagic
* Update wording
* Re-add EEPROM reset, by popular demand
And add eeprom-less version to drashna userspace for his sanity
* Fix spacing
* Set BOOTMAGIC_ENABLE to use full/lite/off
And default yes to "full" for compatibility
* Add Bootmagic lite info to templates
* Remove text from makefiles
* Cleanup of makefile
* mention yes in bootmagic docs
* Wordsmitthing the docs
* Fix white spaces
* Readd default bootmagic setting, because it's necessary
* Add Function level EEPROM configuration
Add kb and user functions for EEPROM, and example of how to use it.
* Bug fixes and demo
* Additional cleanup
* Add EEPROM reset macro to example
* Forgot init function in list
* Move eeconfig_init_quantum function to quantum.c and actually set default layer
* See if removing weak quantum function fixes issue
* Fix travis compile error
* Remove ifdef blocks from EECONFIG so settings are always set
* Fix for ARM EEPROM updates
* Fix merge issues
* Fix potential STM32 EEPROM issues
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* add temporary test code rgblight-macro-test1.[ch]
* rgblight.h : mode auto numberring and auto generate mode name symbol
No change in build result.
* rgblight.c use RGBLIGHT_MODE_xxx symbols
No change in build result.
* quantum.c use RGBLIGHT_MODE_xxx symbols
No change in build result.
* fix build break. when RGB_MATRIX_ENABLE defined
* add temporary test code rgblight-macro-test2.[ch]
* modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper()
* modify rgblight_task()
* configurable each effect compile on/off in config.h
* update docs/feature_rgblight.md
* fix conflict. docs/feature_rgblight.md
* remove temporary test code rgblight-macro-test*.[ch]
* fix comment typo.
* remove old mode number from comment
* update docs/feature_rgblight.md about effect mode
* Revert "update docs/feature_rgblight.md about effect mode"
This reverts commit 43890663fc.
* some change docs/feature_rgblight.md
* fix typo
* docs/feature_rgblight.md update: revise mode number table
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
* integrated Peter Fleury's LCD library for HD44780 LCDs
* fixed typo
* cleanup finished
* add documentation
* added HD44780 documentation
* removed keyboard from .gitmodules
* resolved merge conflict
* removed edit of kira75s rules.mk made by merge
* moved hd44780 to drivers/avr
* Added licence info to hd44780 files
* Added link to hd44780 docs.
* Added Modular keyboards L,R and NUM
Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split
* Remove modular from master
This is to fix incorrect branching
* Add effect speed support for RGB Matrix *No eeprom yet*
Keycodes RGB_SPI and RGB_SPD have been added to increase and decrease effect speed.
Speed is not saved in EEPROM yet as per Jack's request.
* Update rgb_matrix.c
* RGB Matrix speed fix rgblight.h
* More fixes for rgb speed. Speed functions declared but not used in rgblight
* More travis fixes..
* Another one for travis..
* Change handling of adjust layer to make it more LT(...) friendly.
* Update based on feedback from drashna.
* Change handling of adjust layer to make it more LT(...) friendly. This reworks handling to make it a little more friendly to include in keymaps.
* Skip process_music in NO_MUSIC_MODE is defined
* Skip matrix_scan_music if NO_MUSIC_MODE is defined
* Skip music_all_notes_off if NO_MUSIC_MODE is defined
* Leave matrix_scan_music in, because it reduces firmware size by 150b....
* Add docs for NO_MUSIC_MODE
* Move lufa descriptor to protocol/usb_descriptor
* Try to compile usb_descriptor on ChibiOS
* Add lufa_utils for ChibiOS
Lufa USB descriptors for ChibiOS
* More lufa_util compatibility fixes
* First compiling version of shared USB descriptor
* Send the usb descriptors
* Fix the CONSOLE output on ChibiOS
* Add errors for unsupported interfaces
* Enable support for vitual serial port USB descriptors
* Implement virtual serial port for ChibiOS
* Cleanup the lufa_utils
Use the default lufa header files
* Add raw hid support for ChibiOS
This is completely untested
* Enable midi compilation on ChibiOS
* Move midi functionality out of lufa.c
* Don't register sysex callback when not needed
* ChibiOS compilation fixes
* Update ChibiOS submodule
* Fix the Midi USB descriptor
It didn't work properly when both Midi and Virtual serial port was enabled.
* Add MIDI support for ChibiOS
* Fix USB descriptor strings on ChibiOS
* Use serial usb driver for raw hid
* Generalize the ChibiOS stream like drivers
This makes the initialization much more simple and eliminates a lot of
the code duplication.
* Convert console output to chibios stream driver
* Fixes for ChibiOS update
* Update the ChibiOS contrib submodule
To include the usb data toggle synchronization fixes
* Fix duplicate reset enumeration on ChibiOS
* Add missing include
* Add number of endpoints check for ChibiOS
* Enable serial USB driver on all keyboards
* Add missing includes when API is enabled withot midi
* Add another missing inlcude
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.
* Change default to KEYMAP_MIT, not KEYMAP_OFFSET
* Add custom RGB code for JJ40
* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.
* RGB working on JJ40.
* Fix: saturation increase/decrease flipped
* Add new directory for my custom keymap with RGB keycodes
* Swap LAlt and LGUI
* Update JJ40 max power draw with measured value
* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.
* Super rudimentary backlight test, init RGB LEDs on boot
* Backlighting works - stays on for now
* Toggling working
* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c
* Timers not working
* Delete global.h
* Cleanup
* Compiles
* Good sign: LEDs stop working again
* Handle timer1 overflow
* Progress: fix: forgot to init
* Backlighting fully working now except breathing.
* Revert keymap to original keycodes
* Update XD60 keymap README
* Update JJ40 keymap with backlight toggles
* Breathing working just fine.
* Update references
* Add backlight_set() call
* Cleanup code to disable backlight
* Fix: does not compile
* Fix: missing call to rgblight_task.
* Testing with BACKLIGHT_BREATHING
* Cleanup
* Cleanup comments
* More commenting cleanup.
* Do not enable BACKLIGHT_BREATHING by default
* add breathing to bananasplit
* backlight breathing overhaul
* fix the backlight_tick thing.
* fix for vision_division backlight
* fix a few keymaps and probably break breathing for some weirdly set-up boards.
* remove BL_x keycodes because they made unreasonable assumptions
* some fixes for BL keycodes
* integer cie lightness scaling
* use cie lightness for non-breathing backlight and make breathing able to reach true max brightness
* new planck keymap, new feature - hybrid shift/enter action key (great for small keyboards!)
* corrected documentation to specify rules.mk file instead of Makefile
Brice Figureau