Dean Camera
de0ccb3d09
Add NO_VTARGET_DETECT compile time option to the AVRISP-MKII clone project, to disable VTARGET detection on AVR models with an on-chip ADC.
15 years ago
Dean Camera
c6f21fde62
Speed up Webserver demo data rate by not sending a full ethernet frame each time, preventing the receiver from using a delayed ACK scheme which slows down the connection. TELNET server cleanup.
15 years ago
Dean Camera
8154331da6
Move DHCP negotiation timer into the DHCP connection application state structure, so that each connection gets its own timeout counter (only one connection currently used, but this way is more correct). Add const correctness to static data in the TELNETServerApp.c and HTTPServerApp.c files.
15 years ago
Dean Camera
41ef05a6e5
Fix DHCPClient init code in the Webserver project writing to the incorrect application state location (thanks to Mike Alexander).
15 years ago
Dean Camera
3a2c1db675
Fixed lack of SECTION ERASE command in TPI programming mode of the AVRISP project preventing fuses from being cleared.
15 years ago
Dean Camera
ab195ab1da
Added .5MHz recovery clock to the AVRISP programmer project when in ISP programming mode to correct mis-set fuses.
...
Fixed AVRISP project not extending the command delay after each successful page/word/byte program.
15 years ago
Dean Camera
35a0fe9384
Fixed USB_GetHIDReportSize() returning the number of bits in the specified report instead of bytes.
...
Moved the USB_GetHIDReportItemInfo() calls into the main report item passing loop in the *HostWithParser demos - it is fast enough not to effect performance, and avoids duplicate code.
Make Webserver project report the LUFA version as part of the HTTP header.
15 years ago
Dean Camera
3ab0b3a027
Fix LowLevel Keyboard demo -- accidentally trying to dereference a uint8_t type in ProcessLEDReport().
15 years ago
Dean Camera
7ae91099e9
Fix AVRISP-MKII clone project's TPI Chip Erase command processing - ensure erase location is the high byte in the given address space, check NVMBUSY for completion rather than the NVM Bus Enable bit.
...
Change If-Else chains over to switch statements in XPROGProtocol.c for clarity.
15 years ago
Dean Camera
1fdc0e664e
Make Webserver allow HTTP requests for files with up to 50 characters in the path instead of 30, to be in synch with the project documentation.
...
Change Webserver project's ENABLE_DHCP compile time option to ENABLE_DHCP_CLIENT to more accurately indicate its function.
15 years ago
Dean Camera
15f84bb8f5
New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).
...
Spell-check code/comments in the Webserver/AVRISP-MKII projects.
15 years ago
Dean Camera
f4f44f9fc1
Re-add Webserver uIP application polling, apply patch to uIP by Andrew Ruder to fix corrupt TCP streams when multiple applications are used and the applications are polled for more data.
15 years ago
Dean Camera
7d3ed40070
Fix TELNET server locking up if an invalid command was issued.
15 years ago
Dean Camera
b9cf4815e5
Disable uIP connection polling for now - this seems to corrupt the buffers.
15 years ago
Dean Camera
16ea5aa7a2
Add a TELNET server to the webserver project, which currently can list active TCP connections.
15 years ago
Dean Camera
77e86e7d82
Exlude the "INCLUDE_FROM_*" macros from the individual project's documentation.
15 years ago
Dean Camera
08e8d6393e
Exclude FATFs from the Webserver project documentation. Rename the functions in the HTTPServerApp.c/.h files so that they use the correct "HTTPServerApp_" prefix, and not "Webserver_".
15 years ago
Dean Camera
53eca61d02
Minor fixups to the documentation and preprocessor tokens.
15 years ago
Dean Camera
f979fd36be
Remove now unused conf directory from the uIP stack in the Webserver project.
15 years ago
Dean Camera
84e1241f80
Replace the Webserver demo's uIP with the latest code ripped from the Contiki project by Adam Dunkels.
15 years ago
Dean Camera
1008260985
Make packet processing code in the Webserver project a bit neater using a switch statement instead of an if-else-if chain.
15 years ago
Dean Camera
5687ac7316
Fix TPI mode chip erase code not properly erasing the target memory space.
15 years ago
Dean Camera
8d49480891
Oops - new Write Word alignment code in the TPI programming function means that the WriteBuffer parameter is no longer const.
15 years ago
Dean Camera
ec6fbb219f
Make TPI writes add a dummy high byte if the data isn't word-aligned.
15 years ago
Dean Camera
b736a5ef2b
Make TPI programming protocol program in words, not bytes to satisfy the datasheet conditions.
15 years ago
Dean Camera
4d246a82cb
Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen).
...
Mark the AVRISP-MKII project descriptors as being both Bus Powered and Device Powered.
Copy over file level documentation of the peripheral drivers to the module level documentation.
15 years ago
Dean Camera
9e7ffcb014
Make AVRISP XPROG function parameters const where possible.
15 years ago
Dean Camera
5f363996e3
Fixed issues with EEPROM and FLASH ISP programming in the AVRISP project.
15 years ago
Dean Camera
b6a4584a19
Fixed Pipe_IsEndpointBound() function not taking the endpoint's direction into account.
...
Re-added Pipe_IsEndpointBound() calls to the CDC and RNDIS host class drivers, not that the function has the correct behaviour for devices with bidirectional endpoints.
15 years ago
Dean Camera
bb1a036f09
Clean up HTTP webserver code in the Webserver project, so that it follows the uIP application structure guidelines and uses cleaner state machine based code.
15 years ago
Dean Camera
331e8dece6
Use _delay_us() function in the XPROGTarget.c file to ensure timing requirements are met, rather than a fixed number of NOPs.
15 years ago
Dean Camera
75d27f8ef0
Oops - PDI handshake delay was too long, causing the device's /RESET functionality to be re-enabled.
15 years ago
Dean Camera
97f7cd947b
Better HTTP GET parsing in the Webserver demo, add application polling.
15 years ago
Dean Camera
e8b8ed2bad
Add TCP retransmission support to the HTTP webserver in the Webserver project, so that lost segments are retransmitted as needed.
15 years ago
Dean Camera
254a0c1ae8
Update driver INF files - change manufacturer name from the original template's name to the Four Walled Cubicle website.
15 years ago
Dean Camera
a114878209
Oops - TPI programming is broken in the AVRISP project because the busy-flag check wasn't inverting the result.
15 years ago
Dean Camera
872f61ff53
Fix TPI communications in the AVRISP project when bit-banged USART mode is selected.
15 years ago
Dean Camera
fa3135d485
Add MIME type handling to the Webserver project, so that files of different types (e.g. images) can be served out to HTTP clients.
15 years ago
Dean Camera
1b59f561ed
Second fix to Webserver project's makefile for the FATFs path case to fix *nix builds.
15 years ago
Dean Camera
e4674aecb7
Delete FATFs .lst files from the Webserver project, accidentally committed.
15 years ago
Dean Camera
1babe52682
Oops - fix path case in the Webserver project makefile, to fix *nix builds.
15 years ago
Dean Camera
5f776f4785
Fix up project documentation files' overview tables, so that multiple items occupy multiple lines in the same cell, rather than multiple cells.
15 years ago
Dean Camera
d11ed10c53
Add FatFS library to the Webserver project, extend the HTTP server so that it now serves files from the Dataflash. Add Mass Storage device mode class driver so that files can be loaded to the board Dataflash when inserted into a PC.
15 years ago
Dean Camera
cec699ac59
Clean up Webserver project - add more Doxygen documentation for the new DHCP client functions and defines.
15 years ago
Dean Camera
a960e4b3b2
Add DHCP server to the Webserver demo for automatic network configuration. Correct uIP timer clock not tracking the correct timespan.
15 years ago
Dean Camera
1aeb5056d6
Ensure TPI enable timing requirements are met in AVRISP-MKII programmer. Remove invalid code in the TPI read/write functions.
15 years ago
Dean Camera
2059fd8b1a
Manually pull PDI clock pin high for 1ms before disabling PDI mode in the AVRISP-MKII project, to ensure that the PDI bus is disabled in the target and /RESET functionality restored.
15 years ago
Dean Camera
eb99b1ec90
Exclude host application directories from the Doxygen input source file directories.
15 years ago
Dean Camera
4f96283761
Add missing AVRISPDescriptors.c/.h files to the XPLAINBridge project.
15 years ago
Dean Camera
4bd44139b1
Move TWI.c driver into the straight LUFA/Drivers/Peripheral/ directory.
...
Fix TemperatureDataLogger and Webserver project builds.
15 years ago