* Add satisfaction75 revision 1
* Update manufacturer
* Add tester layout and update rev1 comments
* Add ifdef guards for OLED for tester
* Add oled disabling rules
* Update to save backlight settings and setup for VIA custom config
* Add new VIA values to satisfaction75
* Safety guard in clock set mode
* Fix mistaken doc edit
* Address PR comments
* bring the default back to pass travis CI
* Address further PR comments
* 412_64 move to handwired
412_64 and its second printing, Mark Zero Stand Aside, are now obsolesced by new hardware. As only two units exist in the wild not owned by me, I'm moving the definition to handwired.
* Mark 3 Stand Aside ready for production.
Uploading firmware, compiled and tested, for Mark 3 Stand Aside. The hardware's ready, now the software is too.
* Whoops.
Should've branched before pushing Stand Aside. Sorry 'bout that.
* Revert "Whoops."
This reverts commit d222046cfe.
* Revert "Mark 3 Stand Aside ready for production."
This reverts commit c790899af7.
* Mark 3 Stand Aside ready.
Initial commit for Mark 3 Stand Aside, ready for production.
* Update keyboards/standaside/rules.mk
noroadsleft suggested removal of a line, 'LAYOUTS = ortho_4x16'. I agree.
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Cleanup for pull request.
Making changes requested by Drashna, as they're all good, and I know way less about the standards than they do.
* Initial cleanup completion.
Missed a few lines in standaside.c, they're cleaned up now.
* Update info.json
Adding layout for the macro version.
* Update info.json
Changed the macro layout to match exactly like the non-macro version (split backspace and bottow row match)
* added my launchpad
* updated keymap with legends and fixed layout errors
* Added default keymap with added layer for RGB controls and included the necessary config code
* fixed layer orders
* removed my personal keymap to clean PR
* missed an underscore
* updated readme
* removed more unnecessary code
* moved RGB code to its own config phone
* moved underglow info to its own readme
* removed redundant code from default_rgb config.h file, included QMK KEYBOARD H in place of initial defines in keymap.c
* reverted launchpad config
* removing the = because I can't figure out why its there
* Revert "removing the = because I can't figure out why its there"
This reverts commit e3b5e6d568.
* reverted rev1/config.h
* reverted all files I should not have touched
* removing redundant code in rules.mk
* readibility improvements to keymap
* Add ISO backslash key position to matrix and keymap files
* Use KC_NO instead of KC_BSLS for unused position in custom keymap
* Add new key position to json layout file used by online configurator
* Get things working except indicators
* Attempt to get things working
* hmm
* Compiles but doesn't run
* Make data transfer work
* Get all indicators working
* Remove old transport
* Prepare for pullreq
* Revert keymap from testing to production
* Final error checking for pull request
* Remove autogenerated is_command from config.h
* Rewrite pin toggles using qmk functions
* 412_64 move to handwired
412_64 and its second printing, Mark Zero Stand Aside, are now obsolesced by new hardware. As only two units exist in the wild not owned by me, I'm moving the definition to handwired.
* Mark 3 Stand Aside ready for production.
Uploading firmware, compiled and tested, for Mark 3 Stand Aside. The hardware's ready, now the software is too.
* Whoops.
Should've branched before pushing Stand Aside. Sorry 'bout that.
* Revert "Whoops."
This reverts commit d222046cfe.
* Revert "Mark 3 Stand Aside ready for production."
This reverts commit c790899af7.
* Update userspace with common config.h
* Add my dz60, satan and xd75 keyboard keymaps
* Fixing executable bits changed during last upstream merge
* Cleanup unnecessary files and defines
* Remove unnecessary defines from userspace config
* Add underglow controls to dz60 function layer
* Fixing merge conflicts
* Fixing exectable bits changed during merge
* Userspace update
* intial commit
* fix up some of the cookie cutter code
* define pins used and size of switch matrix
* enable lighting settings and bootmagic lite
* create the appropriate LAYOUT macro
* remove a comma for compilation errors
* provide a suitable keymap
* disable console and command due to firmware being too large
* add Caps Lock LED support
* Add QMK Configurator support
* fix markdown rendering
* fix mechmerlin to mechkeys
* use `register_code16` and relatives for tapdance code
* rename tapdance keys to more closely mirror the `KC` names in QMK
* additional naming change to match QMK style
* Gray Studio HB85 Initial Support
* Fixed README image
* Updated README
* Disabled Bootmagic and Console for HB85
* Fixed Numpad 4 matrix place
* Fixes board crashing with RGB enabled
* Moved HB85 files to gray_studio folder
* Uses old i2c library since this version makes RGB underglow work
* Improved default keymap with underglow control layer
* Removes obsolete program and uses generic script instead
As per zvecr feedback
* Uses GPIO Functions to initialise and set RGB underglow PINS
* Add keycode for KC_MAKE
* Add KC_MAKE keycode
* Add stanrc85.c file with KC_MAKE
* Remove unused include
* Improved KC_MAKE stolen from Drashna
* Define mod mask for new KC_MAKE code
* RESET board to flash after compiling
* Remove send_string
* RESET fixed in KC_MAKE
* add dusty keymap
* change keymap folder to match my github username
* initial keymap completed in comments only
* layout without NAV completed in comments only
* disable Command to prevent interference with Space Cadet keys
* switch _ and \ in the symbol layer
* Layers complete through _NAV
* add thumb keys to _NAV
* complete _NUM
* all layouts complete; still needs `process_user_record()`
* completed first draft of keymap; still needs config.h to match
* corrected keycodes for Mac macro-volume keys
* fix Mac mute keycode
* add missing Mac keycodes for previous and next track
* placeholder for qwerty layout, not yet completed;
remove unnecessary breaks;
add todos
* eliminate Preonic branch before switching to Minidox branch:
• delete dustypomerleau Preonic keymap folder
• complete keymap.c (QWERTY layer, vanilla numbers layer)
TODO:
• add preferences to config.h
• complete the README
* edit commented keymap diagrams for clarity in dual function keys
* define initial config.h and add rules.mk for mouse key support
* fix redundant line after implementation of tap_code()
* fixed key_timer declaration, added README and rules
* formatting of keymap
* add CTPC to config
* cycle thumb keys to favor center position
* modify config.h for temporary Pro Micro compatibility
* remove superfluous call to use serial; homebrewed mod tap keys are still broken with OSL
* merge _SYS and _MEDIA on new Z_SYS key
* ALT_OP example of new MT macro complete
* initial narze-inspired MT fixes in PRU
* add (currently superfluous) custom keycode for the _SYS layer
* rudimentary `OSL` symbol macros that immediately register the mod and fail to reset the oneshot layer, but do output the proper keys—fix both of these things
* remove permissive hold to improve tapping performance
* remove calls to `clear_oneshot_layer_state()`, as they have no effect inside `process_record_user()`. Tapdance appears to be the way forward.
* final commit before tapdance code; correct layout in comments
* initial tapdance code for shifted mod taps
* add numeric and ergo NUM layers and pinky shifts for keycuts
* add TD() wrappers to tapdance codes and clean up commented layout guides
* add faux return to cur_dance to allow compilation - TODO: research what the default clause should be in cur_dance
* update commented schematics for better readability
* add backspace and delete to lockable layers, Z_SYS -> SYS_Z for consistency, fix schematic errors
* add `DOUBLE_SINGLE_TAP` to tapdance cases to allow doubling of the single tap character without waiting tapping term
* remove reduced oneshot tapping toggles
* update README
* newline tweak :)
* Update keyboards/minidox/keymaps/dustypomerleau/keymap.c
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* remove `PREVENT_STUCK_MODIFIERS`, as this is default behavior
* enable extrakey in rules to enable media keys
* enable extrakeys for media key compatibility on macOS
* add dash and slash to _NUM layers
* change to universal volume keycodes
* revert micro volume adjustments to macOS-specific codes due to lack of functionality (macro volume adjustments are still universal)
* fix image of _SYS layer in comments
* more diagram fixes in comments
* fix typo
* simplify tapdance code
* match _NUM_N to _NUM_E
* move slash to allow better use of comma in number layers
* match layer and keycode enums to the docs
* correct qwerty numlock to match numeric numlock layer
* Change how desktop commands work
* Add DST_MOD_MASK as a config option
* DST_RMV → DST_REM
* Add melody96:konstantin keymap
* Update custom SEND_STRING
* Move feature flags from userspace into keyboard rules
* Use "Vo-", "Vo+" instead of "VoD", "VoU" in keymap comments
* Add RGB controls and numpad Unicode to Melody96 keymap
* Add RGB_SET keycode to Melody96 and RGB files to userspace
* Generate UNICODE and UNICODEMAP constants using macros
* Avoid collisions with X_* send string constants
* Use two spaces before inline comments
* Add _keymap versions of other custom Quantum functions
Not added: eeconfig_update_keymap, eeconfig_read_keymap
* Switch to UNICODEMAP in keyboard rules
* Make toggle_numpad a nested function in process_record_user
* Set Melody96 underglow color to Godspeed blue on EEPROM reset
* Remove most _keymap and _user definitions in userspace
Some keyboards misuse _user functions by defining them in the base files
instead of the corresponding _kb functions (especially led_set_user and
matrix_init_user). Until this is fixed (#5148), I've removed definitions
in my userspace that could cause linking collisions.
* Update GODSPEED_BLUE values and RGB mode keys
* Add GODSPEED_YELLOW color
* Set preferred intervals for rgblight effects
* Update tap dance function names
* Replace td_lshift_fn with generic td_mod_layer, add TD_RCTL_FN
Move TD_FN_RCTL after TD_RCTL_FN
* Replace td_fn_rctrl with generic td_layer_mod
* Add blank lines, prefer explicit initialization
* ACTION_TAP_DANCE_DOUBLE_MODS → ACTION_TAP_DANCE_DOUBLE_MOD
* Update Godspeed colors
* Add media controls to Melody96 keymap
* Add SysRq, Break combos and other keys to Melody96 keymap
* Add HOME/END keys as upper/lower on arrow-up/down
* Reduce .hex file size by turning off unneeded options
* Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand
* Latest super latest version merge
* cbbrowne keymap for XD75re
* starting notes on XD75re keymap plans
* First draft of bottom row of QWERTY
* Switch my special bottom line over to QCENT
* Dunno
* Filling in wanted keys, bit by bit...
* Add copyright, extra macro
* Clean up comments, remove some experimental code I didn't like
* TODO plans for xd75re
* clean up keyboard layout
* QCENT2 is my new experiment for the main keyboard...
* Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer
* Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing
* More xd75 changes, now that I actually have it in hand
* shift keymap around, as original attempt was a bit too aggressive in keeping to the edges
* more revs to XD75
* Dropping parts of the centre keypad in favor of Keys I Really Need
* Improve documentation to conform with how builds are done now
* Improve documentation to conform with how builds are done now
* Add cbbrowne rules file as alternative to having the rules in Makefile
* Makefile not needed anymore for individual keymap
* Some revs to my keymapping
* Add {}
* Add PGUP/PGDN
* Shifted some middle-range keys around
* Needed Tilde, Backquote, and to shift RESET onto FUNCTION layer
* Wanted ~
* cbbrowne hasn't anything to do with hadron keymaps
* trim unneeded bits
* I prefer OrgMode for my notes
* Have a right-alt
* Layer keys make LED colors change
* Add sample user rules for cbbrowne
* Add source of xd75 rules
* Individualized xd75 rules
* Adopt LAYOUT to genericize the layout as an ortholinear 5x15 keyboard
* Tidy up 5x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x6
- layout macro had the wrong name in info.json
* Tidy up 5x7.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x7
- corrected keyboard height
- layout macro had the wrong name in info.json
* Tidy up 6x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 6x6
- layout macro had the wrong name in info.json
* Separate keymaps to VIA enabled/dissabled.
- Default rules.mk has been changed to disable via.
- VIA keymaps have been added for default keymaps.
* Update naming
Andrew Kannan