* pull fuse settings for bootloader jump
* fix 32a chips
* make automatic bootloader selection optional
* quantify bootloaders
* fixs #164, speeds up dfu reset
* fix for chips w/o usb
* missing an n
* fix bootloader sizes, use words for addresses
* fix bmini, pearl, and [[ issue, make things quiet
* ignore avr errors on arm for now
* update settings for the light
* document bootloader stuff
* add bootloader title
* Copy the ergodox_ez code to handwired/dactyl
Differences from the Ergodox:
* Use QMK_SUBPROJECT_H instead of QMK_KEYBOARD_H, since it's under
handwired
* Omitted several keymaps. They'll eventually be broken (since the
Dactyl has fewer keys), and I don't want to try to fix them.
* Omitted the keymap images for the default layout, since they depict
a different keyboard.
* Everything that said Ergodox now says Dactyl, naturally.
* [whitespace] Delete trailing whitespace
My editor does this automatically so it's just gonna keep cropping up...
* Cut the dactyl down to the right number of columns
(Remember, throughout matrix.c, everything called "row" is really a
column, and vice-versa).
* Remove LED-related code
* Tighten up the Dactyl's build options
* Whitespace cleanup in twimaster.c
* Hardtabs -> spaces
* No more trailing whitespace
* Typo fix
* Correct the CPU frequency units
The Teensy's CPU definitely doesn't run at 16 petahertz...
* Restore access to ONEHAND_ENABLE
I turned it off in 26d47cb42622d990a7c3335e7fcc151aa3edfbf0 while
desperately debugging; I just wanted to ensure it wasn't causing the
problem I was seeing. It was not, in fact, causing the problem, so it's
back.
Also fixed the swap matrix in dactyl.c, since it still referred to
columns that exist in the Ergodox but not the Dactyl.
* Clearer phrasing about TWI's effect on scan rate
* Fix up the Dactyl's firmware-loading instructions
Sadly, the Dactyl has no hole for the onboard reset button.
* Dvorak keymap for the Dactyl
* The Erincalling Layout
* Erincalling layout: Add a := key
I've been working in Go, which uses := a lot, and it's awkward to type
in this layout.
* Dactyl README: link to the dactyl-keyboard repo
* Add a missing copyright line
I don't know how much this matters? Honestly, it's enough for me that my
name is on the git commit. But hey, let's be consistent until there's a
specific reason not to be, right?
* Dactyl: remove commented-out code
I hate it I hate it I hate it
There's not even any information about what it was trying to do!!!! >:(
* Add a note about the row/column ridiculousness
* [whitespace] realign some constants
* Don't claim B4 is tied to VCC
It doesn't matter at all? I honestly don't know what the reason ever
was. It looks like it dates back to the original ErgoDox and I've never
seen one sentence about the purpose.
I've been skipping that wire for some time, and I promise it works fine.
* Dactyl keymaps: Send RALT for right-hand alt key
Not terribly important but I just like things tidy OK
* typo fix
* Refer to "dactyl.h" explicitly
QMK_SUBPROJECT_H has been working locally, but fails in CI. Strange!
* Dactyl: Don't use QMK_SUBPROJECT_H at all
It's still breaking in CI, even though it was a never a problem locally.
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
* New Frosty Flake layout for QFR TKL
Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.
* README fix & keymap update for 3 keyboards
Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.
Added TAPPING_TERM = 150 to config.h for all keyboards
Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.
* Update readme for QFR_JM to include make instructions
* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware"
This reverts commit a45f264ada, reversing
changes made to 62349c3341.
* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware""
This reverts commit eae54fb3be.
* Added QWERTY support to the QFR_JM
Implemented variable default base layer from the Planck default keymap.
* Update README to reflect QWERTY support
* Nyquist:DivergeJM - Update RESET location
Add a reset button to both hands, accessible when halves are disconnected.
* Typo fix
* Update DivergeJM
Switched master to Left hand,
Moved Reset key to a different location
* Added macros to send R pointer & dplyr pipe
Macros added as a string of keypresses, couldn't figure out how to get SEND_STRING to work.
* Added ADJUST -> QWERTY, DVORAK, COLEMAK
Re-implemented update_tri_layer fuctionality to reset base layer for Terminus_Mini & DivergeJM Nyquist keymaps to QWERTY, DVORAK or COLEMAK via the ADJUST layer.
Updated ReadMe files accordingly.
* Fix base layout diagram for Terminus_Mini
Remove split from diagram
* Changed the R operators to SEND_STRING, rather than keypress macros
* Added Dvorak to the QFR_JM keymap
* fixed duplicate row in Nyquist keymap
* Fix readme - LAlt location on mouse layer
* Set EE_HANDS to allow either Nyquist hand to work as master.
* Update R operator strings, clean up layering for terminus_mini, QFR_JM and DivergeJM
"<-" to " <- "
"%>%" to " %>% "
Also played around with the layering, removed unnecessary TAP_TOGGLE for LOWER and shuffled FUNCTION and MOUSE momentary actions to reflect layer order.
* Update bottom alpha row to output symbols on LOWER
This row now outputs the following (z -> /) when in the LOWER layer:
<-
%>%
{
[
`
|
]
}
.
/
* Updated readme files for QFR_JM, terminus_mini & DivergeJM
QFR_JM readme reflects correct LOWER bottom row symbol output,
terminus_mini & DivergeJM reflect correct command line make instructions.
* Add media keys to QFR_JM LOWER - Replicate QFR default functionality
* Fix issue with Mouse layering
Stuck on mouse layer because the wrong macro was assigned to the 'exit layer' key. Reassigned that key.
* Changed " <- " to "<- " for QFR_JM, terminus_mini & DivergeJM
* Add woodpad
* Cleanup
* Remove misc layouts for woodpad
* Move woodpad to handwired
* Updated RGB Underglow info
* Cleanup macros
* Tweaked RGB lighting stuff
* Start to merge orthodox/ergodox keymaps (persistant layers)
* Add woodpad
* Add forced NKRO
* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow
* Updated macros and added workman keymaps
* Fixed RGB lighting for Workman layout
* Add leader keys
* Remove force NKRO
* Add Viterbi one handed layout and minor tweaks to others
* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts
* Made "make" keystroke universal
* Clean up and updates of drashna keymaps
* Add workman layer to planck
* Update to keymaps
* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox
* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function
* Remove unnecessary planck layout
* Fixed Workman song
* update make command and added lit reset
* Fixed formatting to fall in line with official standards
* Minor tweaks
* Removed Leader Keys from Ergodox EZ Keymap
Added KC_RESET that resets board and sets underglow to red
* Tweak reset code
* Cleanup
* Remove misc layouts for woodpad
* Move woodpad to handwired
* Updated RGB Underglow info
* Cleanup macros
* Tweaked RGB lighting stuff
* Start to merge orthodox/ergodox keymaps (persistant layers)
* Add forced NKRO
* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow
* Updated macros and added workman keymaps
* Fixed RGB lighting for Workman layout
* Add leader keys
* Remove force NKRO
* Add Viterbi one handed layout and minor tweaks to others
* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts
* Made "make" keystroke universal
* Clean up and updates of drashna keymaps
* Add workman layer to planck
* Update to keymaps
* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox
* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function
* Remove unnecessary planck layout
* Fixed Workman song
* update make command and added lit reset
* Fixed formatting to fall in line with official standards
* Minor tweaks
* Removed Leader Keys from Ergodox EZ Keymap
Added KC_RESET that resets board and sets underglow to red
* Tweak reset code
* Fix rebasing issues
* remove head files
* Fix "macro" issue
* Rename ez keymaps for userspace
* Revert "Rename ez keymaps for userspace"
This reverts commit c25425911852e41711a5f0273b5741adb16e5bd4.
* Renamed Ergodox EZ layouts so that all of my personal layouts are on the same name, in prep for using userspaces
* Fix ergodox code
* Remove "drashna-ez" keymap as it's no longer needed
* Migrate majority of code to Userspace
* Add woodpad
* Cleanup
* Remove misc layouts for woodpad
* Move woodpad to handwired
* Updated RGB Underglow info
* Cleanup macros
* Tweaked RGB lighting stuff
* Start to merge orthodox/ergodox keymaps (persistant layers)
* Add woodpad
* Add forced NKRO
* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow
* Updated macros and added workman keymaps
* Fixed RGB lighting for Workman layout
* Add leader keys
* Remove force NKRO
* Add Viterbi one handed layout and minor tweaks to others
* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts
* Made "make" keystroke universal
* Clean up and updates of drashna keymaps
* Add workman layer to planck
* Update to keymaps
* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox
* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function
* Remove unnecessary planck layout
* Fixed Workman song
* update make command and added lit reset
* Fixed formatting to fall in line with official standards
* Minor tweaks
* Removed Leader Keys from Ergodox EZ Keymap
Added KC_RESET that resets board and sets underglow to red
* Tweak reset code
* Cleanup
* Remove misc layouts for woodpad
* Move woodpad to handwired
* Updated RGB Underglow info
* Cleanup macros
* Tweaked RGB lighting stuff
* Start to merge orthodox/ergodox keymaps (persistant layers)
* Add forced NKRO
* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow
* Updated macros and added workman keymaps
* Fixed RGB lighting for Workman layout
* Add leader keys
* Remove force NKRO
* Add Viterbi one handed layout and minor tweaks to others
* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts
* Made "make" keystroke universal
* Clean up and updates of drashna keymaps
* Add workman layer to planck
* Update to keymaps
* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox
* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function
* Remove unnecessary planck layout
* Fixed Workman song
* update make command and added lit reset
* Fixed formatting to fall in line with official standards
* Minor tweaks
* Removed Leader Keys from Ergodox EZ Keymap
Added KC_RESET that resets board and sets underglow to red
* Tweak reset code
* Fix rebasing issues
* remove head files
* Fix "macro" issue
* Rename ez keymaps for userspace
* Revert "Rename ez keymaps for userspace"
This reverts commit c25425911852e41711a5f0273b5741adb16e5bd4.
* Renamed Ergodox EZ layouts so that all of my personal layouts are on the same name, in prep for using userspaces
* Fix ergodox code
* Remove "drashna-ez" keymap as it's no longer needed
* Add woodpad
* Cleanup
* Remove misc layouts for woodpad
* Move woodpad to handwired
* Updated RGB Underglow info
* Cleanup macros
* Fix odd merge issue
* Tweaked RGB lighting stuff
* Start to merge orthodox/ergodox keymaps (persistant layers)
* Add forced NKRO
* Added Colemak and Dvorak layers to default orthodox keymap
* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow
* Updated macros and added workman keymaps
* Fixed RGB lighting for Workman layout
* Add leader keys
* Remove force NKRO
* Add Viterbi one handed layout and minor tweaks to others
* Finishing up Viterbi keyboard layout, and NKRO tweaks to other layouts
* Made "make" keystroke universal
* Clean up and updates of drashna keymaps
* Add workman layer to planck
* Update to keymaps
* Fix accidental commit because I don't know how to git
* Fix makefile toggle code in ez keymap
Finish adding RGB code to orthodox
* missing underscore in init function declaration
* Updated RGB Underglow layer indication code due to discovery of the layer_state_set_kb function
* Remove unnecessary planck layout
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
* New Frosty Flake layout for QFR TKL
Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.
* README fix & keymap update for 3 keyboards
Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.
Added TAPPING_TERM = 150 to config.h for all keyboards
Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.
* Update readme for QFR_JM to include make instructions
* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware"
This reverts commit a45f264ada, reversing
changes made to 62349c3341.
* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware""
This reverts commit eae54fb3be.
* Added QWERTY support to the QFR_JM
Implemented variable default base layer from the Planck default keymap.
* Update README to reflect QWERTY support
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
* New Frosty Flake layout for QFR TKL
Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.
* Add existing file
* Add new keyboard layout - initial commit
* Revised readme.md
* Clarified readme.md, reorganized keymap.c, and added license text.
* Fixing last incomplete commit
* Just a little code cleanup to make things more readable.
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* start to update readmes and keyboards
* look in keyboard directories for board.mk
* update visualizer rules
* fix up some other keyboards/keymaps
* fix arm board ld includes
* fix board rules
* fix up remaining keyboards
* reset layout variable
* reset keyboard_layouts
* fix remainging keymaps/boards
* update readmes, docs
* add note to makefile error
* update readmes
* remove planck keymap warnings
* update references and docs
* test out tarvis build stages
* don't use stages for now
* don't use stages for now
* Remove all Makefiles from the keyboards directory.
* update keymaps added in the last 8 days
* Ignore keyboard/keymap makefiles
* update hand_wire to reflect our new Makefile-less reality
* Update the make guide to reflect the new reality
* move planck keymap options to rules.mk
* update planck keymaps 4real
* trigger travis
* add back build_keyboard.mk
* restore changes to build_keyboard
* include variables and .h files as pp directives
* start layout compilation
* split ergodoxes up
* don't compile all layouts for everything
* might seg fault
* reset layouts variable
* actually reset layouts
* include rules.mk instead
* remove includes from rules.mk
* update variable setting
* load visualizer from path
* adds some more examples
* adds more layouts
* more boards added
* more boards added
* adds documentation for layouts
* use lowercase names for LAYOUT_
* add layout.json files for each layout
* add community folder, default keymaps for layouts
* touch-up default layouts
* touch-up layouts, some keyboard rules.mk
* update documentation for layouts
* fix up serial/i2c switches
Drashna Jaelre