/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */

/** \dir LUFA/Common
 *  \brief Common library header files.
 *  
 *  This folder contains header files which are common to all parts of the LUFA library. They may be used freely in
 *  user applications.
 *
 *  \dir LUFA/Drivers
 *  \brief Library hardware and software drivers.
 *  
 *  This folder contains all the library hardware and software drivers for each supported board and USB AVR
 *  microcontroller model.
 * 
 *  \dir LUFA/Drivers/Misc
 *  \brief Miscellaneous driver files.
 *  
 *  This folder contains drivers for aspects other than the USB interface, board hardware or AVR peripherals.
 * 
 *  \dir LUFA/Drivers/Peripheral
 *  \brief USB AVR peripheral driver files.
 *  
 *  This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible with
 *  all USB AVR models.
 *
 *  \dir LUFA/Drivers/Peripheral/AVR8
 *  \brief 8-Bit AVR model peripheral driver files.
 *  
 *  This folder contains drivers for several of the AVR internal peripherals such as the USART and ADC, on supported
 *  32-Bit AVR models. Its contents should <b>not</b> be included by the user application - the dispatch header file
 *  located in the parent directory should be used instead.
 *
 *  \dir LUFA/Drivers/Peripheral/AVR32
 *  \brief 32-Bit AVR model peripheral driver files.
 *
 *  This folder contains drivers for several of the AVR internal peripherals such as the USART and ADC, on supported
 *  8-Bit AVR models. Its contents should <b>not</b> be included by the user application - the dispatch header file
 *  located in the parent directory should be used instead.
 *
 *  \dir LUFA/Drivers/USB
 *  \brief USB controller peripheral driver files.
 *  
 *  This folder contains the main header files required to implement the USB interface in the USB supporting AVR models.
 *  The header files contained directly in this folder should be included in the user application in order to gain USB
 *  functionality, and the appropriate C source files in the LowLevel and HighLevel driver folders added to the compile
 *  and link stages.
 *
 *  \dir LUFA/Drivers/USB/LowLevel
 *  \brief Low level USB driver files.
 *  
 *  This folder contains low level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.
 *
 *  \dir LUFA/Drivers/USB/HighLevel
 *  \brief High level USB driver files.
 *  
 *  This folder contains high level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.
 *
 *  \dir LUFA/Drivers/USB/Class
 *  \brief USB Class helper driver files.
 *  
 *  This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library,
 *  but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive
 *  development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications.
 *
 *  \dir LUFA/Drivers/USB/Class/Device
 *  \brief USB Device Class helper driver files.
 *  
 *  Device mode drivers for the standard USB classes.
 *
 *  \dir LUFA/Drivers/USB/Class/Host
 *  \brief USB Host Class helper driver files.
 *  
 *  Host mode drivers for the standard USB classes.
 *
 *  \dir LUFA/Drivers/Board
 *  \brief Board hardware driver files.
 *  
 *  This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from
 *  the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of
 *  hardware placed on supported boards.
 *
 *  \dir LUFA/Drivers/Board/USBKEY
 *  \brief USBKEY board hardware driver files.
 *  
 *  This folder contains drivers for hardware on the Atmel USBKEY demonstration board. The header files in this folder should
 *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
 *  should be included instead.
 *
 *  \dir LUFA/Drivers/Board/STK526
 *  \brief STK526 board hardware driver files.
 *  
 *  This folder contains drivers for hardware on the Atmel STK526 development board. The header files in this folder should
 *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
 *  should be included instead.
 *
 *  \dir LUFA/Drivers/Board/STK525
 *  \brief STK525 board hardware driver files.
 *  
 *  This folder contains drivers for hardware on the Atmel STK525 development board. The header files in this folder should
 *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
 *  should be included instead.
 *
 *  \dir LUFA/Drivers/Board/RZUSBSTICK
 *  \brief RZUSBSTICK board hardware driver files.
 *  
 *  This folder contains drivers for hardware on the Atmel RZUSBSTICK board, as used in the Atmel "Raven" wireless kits. The header
 *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
 *  the parent Board directory should be included instead.
 *
 *  \dir LUFA/Drivers/Board/ATAVRUSBRF01
 *  \brief ATAVRUSBRF01 board hardware driver files.
 *  
 *  This folder contains drivers for hardware on the Atmel ATAVRUSBRF01 board, as used in several Atmel wireless demo kits. The header
 *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
 *  the parent Board directory should be included instead.
 *
 *  \dir LUFA/DriverStubs
 *  \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.
 *  
 *  This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those
 *  directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files
 *  copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,
 *  the corresponding LUFA board APIs will work correctly with the non-standard board hardware.
 */