/* LUFA Library Copyright (C) Dean Camera, 2011. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ /** \file * \brief USB host pipe stream function definitions. * * This file contains structures, function prototypes and macros related to the sending and receiving of * arbitrary data streams through the device's data pipes when the library is initialized in USB host mode. * * \note This file should not be included directly. It is automatically included as needed by the USB driver * dispatch header located in LUFA/Drivers/USB/USB.h. */ /** \ingroup Group_PipeRW * @defgroup Group_PipeStreamRW Read/Write of Multi-Byte Streams * * Functions, macros, variables, enums and types related to data reading and writing of data streams from * and to pipes. * * @{ */ #ifndef __PIPE_STREAM_H__ #define __PIPE_STREAM_H__ /* Includes: */ #include #include #include #include "../../../Common/Common.h" #include "USBTask.h" /* Enable C linkage for C++ Compilers: */ #if defined(__cplusplus) extern "C" { #endif /* Preprocessor Checks: */ #if !defined(__INCLUDE_FROM_USB_DRIVER) #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. #endif /* Public Interface - May be used in end-application: */ /* Enums: */ /** Enum for the possible error return codes of the Pipe_*_Stream_* functions. */ enum Pipe_Stream_RW_ErrorCodes_t { PIPE_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */ PIPE_RWSTREAM_PipeStalled = 1, /**< The device stalled the pipe during the transfer. */ PIPE_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during * the transfer. */ PIPE_RWSTREAM_Timeout = 3, /**< The device failed to accept or send the next packet * within the software timeout period set by the * \ref USB_STREAM_TIMEOUT_MS macro. */ PIPE_RWSTREAM_IncompleteTransfer = 4, /**< Indicates that the pipe bank became full/empty before the * complete contents of the stream could be transferred. */ }; /* Function Prototypes: */ /** \name Stream functions for null data */ //@{ /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro. * * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer * will instead be performed as a series of chunks. Each time the pipe bank becomes empty while there is still data * to process (and after the current packet has been acknowledged) the BytesProcessed location will be updated with * the total number of bytes processed in the stream, and the function will exit with an error code of * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed * value reaches the total transfer length. * * Single Stream Transfer Example: * \code * uint8_t ErrorCode; * * if ((ErrorCode = Pipe_Discard_Stream(512, NULL)) != PIPE_RWSTREAM_NoError) * { * // Stream failed to complete - check ErrorCode here * } * \endcode * * Partial Stream Transfers Example: * \code * uint8_t ErrorCode; * uint16_t BytesProcessed; * * BytesProcessed = 0; * while ((ErrorCode = Pipe_Discard_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) * { * // Stream not yet complete - do other actions here, abort if required * } * * if (ErrorCode != PIPE_RWSTREAM_NoError) * { * // Stream failed to complete - check ErrorCode here * } * \endcode * * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). * * \param[in] Length Number of bytes to discard via the currently selected pipe. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be processed at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Discard_Stream(uint16_t Length, uint16_t* const BytesProcessed); /** Writes a given number of zeroed bytes to the pipe, sending full pipe packets from the host to the device * as needed. The last packet is not automatically sent once the remaining bytes has been written; the * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearOUT() macro. * * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer * will instead be performed as a series of chunks. Each time the pipe bank becomes full while there is still data * to process (and after the current packet transmission has been initiated) the BytesProcessed location will be * updated with the total number of bytes processed in the stream, and the function will exit with an error code of * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed * value reaches the total transfer length. * * Single Stream Transfer Example: * \code * uint8_t ErrorCode; * * if ((ErrorCode = Pipe_Null_Stream(512, NULL)) != PIPE_RWSTREAM_NoError) * { * // Stream failed to complete - check ErrorCode here * } * \endcode * * Partial Stream Transfers Example: * \code * uint8_t ErrorCode; * uint16_t BytesProcessed; * * BytesProcessed = 0; * while ((ErrorCode = Pipe_Null_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) * { * // Stream not yet complete - do other actions here, abort if required * } * * if (ErrorCode != PIPE_RWSTREAM_NoError) * { * // Stream failed to complete - check ErrorCode here * } * \endcode * * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). * * \param[in] Length Number of zero bytes to write via the currently selected pipe. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be processed at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Null_Stream(uint16_t Length, uint16_t* const BytesProcessed); //@} /** \name Stream functions for RAM source/destination data */ //@{ /** Writes the given number of bytes to the pipe from the given buffer in little endian, * sending full packets to the device as needed. The last packet filled is not automatically sent; * the user is responsible for manually sending the last written packet to the host via the * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. * * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid * storage location, the transfer will instead be performed as a series of chunks. Each time * the pipe bank becomes full while there is still data to process (and after the current * packet transmission has been initiated) the BytesProcessed location will be updated with the * total number of bytes processed in the stream, and the function will exit with an error code of * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed * in the user code - to continue the transfer, call the function again with identical parameters * and it will resume until the BytesProcessed value reaches the total transfer length. * * Single Stream Transfer Example: * \code * uint8_t DataStream[512]; * uint8_t ErrorCode; * * if ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream), * NULL)) != PIPE_RWSTREAM_NoError) * { * // Stream failed to complete - check ErrorCode here * } * \endcode * * Partial Stream Transfers Example: * \code * uint8_t DataStream[512]; * uint8_t ErrorCode; * uint16_t BytesProcessed; * * BytesProcessed = 0; * while ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream), * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) * { * // Stream not yet complete - do other actions here, abort if required * } * * if (ErrorCode != PIPE_RWSTREAM_NoError) * { * // Stream failed to complete - check ErrorCode here * } * \endcode * * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). * * \param[in] Buffer Pointer to the source data buffer to read from. * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be written at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Write_Stream_LE(const void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); /** Writes the given number of bytes to the pipe from the given buffer in big endian, * sending full packets to the device as needed. The last packet filled is not automatically sent; * the user is responsible for manually sending the last written packet to the host via the * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. * * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). * * \param[in] Buffer Pointer to the source data buffer to read from. * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be written at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Write_Stream_BE(const void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); /** Reads the given number of bytes from the pipe into the given buffer in little endian, * sending full packets to the device as needed. The last packet filled is not automatically sent; * the user is responsible for manually sending the last written packet to the host via the * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. * * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid * storage location, the transfer will instead be performed as a series of chunks. Each time * the pipe bank becomes empty while there is still data to process (and after the current * packet has been acknowledged) the BytesProcessed location will be updated with the total number * of bytes processed in the stream, and the function will exit with an error code of * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed * in the user code - to continue the transfer, call the function again with identical parameters * and it will resume until the BytesProcessed value reaches the total transfer length. * * Single Stream Transfer Example: * \code * uint8_t DataStream[512]; * uint8_t ErrorCode; * * if ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream), * NULL)) != PIPE_RWSTREAM_NoError) * { * // Stream failed to complete - check ErrorCode here * } * \endcode * * Partial Stream Transfers Example: * \code * uint8_t DataStream[512]; * uint8_t ErrorCode; * uint16_t BytesProcessed; * * BytesProcessed = 0; * while ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream), * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) * { * // Stream not yet complete - do other actions here, abort if required * } * * if (ErrorCode != PIPE_RWSTREAM_NoError) * { * // Stream failed to complete - check ErrorCode here * } * \endcode * * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). * * \param[out] Buffer Pointer to the source data buffer to write to. * \param[in] Length Number of bytes to read for the currently selected pipe to read from. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be read at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Read_Stream_LE(void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); /** Reads the given number of bytes from the pipe into the given buffer in big endian, * sending full packets to the device as needed. The last packet filled is not automatically sent; * the user is responsible for manually sending the last written packet to the host via the * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. * * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). * * \param[out] Buffer Pointer to the source data buffer to write to. * \param[in] Length Number of bytes to read for the currently selected pipe to read from. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be read at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Read_Stream_BE(void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); //@} /** \name Stream functions for EEPROM source/destination data */ //@{ /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE(). * * \param[in] Buffer Pointer to the source data buffer to read from. * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be written at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Write_EStream_LE(const void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE(). * * \param[in] Buffer Pointer to the source data buffer to read from. * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be written at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Write_EStream_BE(const void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE(). * * \param[out] Buffer Pointer to the source data buffer to write to. * \param[in] Length Number of bytes to read for the currently selected pipe to read from. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be read at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Read_EStream_LE(void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE(). * * \param[out] Buffer Pointer to the source data buffer to write to. * \param[in] Length Number of bytes to read for the currently selected pipe to read from. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be read at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Read_EStream_BE(void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); //@} /** \name Stream functions for PROGMEM source/destination data */ //@{ /** FLASH buffer source version of \ref Pipe_Write_Stream_LE(). * * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. * * \param[in] Buffer Pointer to the source data buffer to read from. * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be written at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Write_PStream_LE(const void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); /** FLASH buffer source version of \ref Pipe_Write_Stream_BE(). * * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. * * \param[in] Buffer Pointer to the source data buffer to read from. * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should * updated, \c NULL if the entire stream should be written at once. * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ uint8_t Pipe_Write_PStream_BE(const void* const Buffer, uint16_t Length, uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); //@} /* Disable C linkage for C++ Compilers: */ #if defined(__cplusplus) } #endif #endif /** @} */