/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage DFU Class USB AVR Bootloader * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * - Series 7 USB AVRs (AT90USBxxx7) * - Series 6 USB AVRs (AT90USBxxx6) * - Series 4 USB AVRs (ATMEGAxxU4) * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Device Firmware Update Class (DFU)
USB Subclass:None
Relevant Standards:USBIF DFU Class Standard, Atmel USB Bootloader Datasheet
Usable Speeds:Full Speed Mode
* * \section Sec_Description Project Description: * * This bootloader enumerates to the host as a DFU Class device, allowing for DFU-compatible programming * software to load firmware onto the AVR. * * This bootloader is compatible with Atmel's FLIP application. However, it requires the use of Atmel's * DFU drivers. You will need to install Atmel's DFU drivers prior to using this bootloader. If you are * using a 64 bit Windows OS, you will need to either disable the driver signing requirement (see online * tutorials for details) or use a digitally signed version of the official Atmel driver provided by a * third party AVR user at * http://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=viewItem&item_id=2196&item_type=project. * * As an open-source option, this bootloader is also compatible with the Linux Atmel USB DFU Programmer * software, available for download at http://sourceforge.net/projects/dfu-programmer/. * * If SECURE_MODE is defined as true, upon start-up the bootloader will be locked, with only the chip erase * function available (similar to Atmel's DFU bootloader). If SECURE_MODE is defined as false, all functions * are usable on start-up without the prerequisite firmware erase. * * Out of the box this bootloader builds for the USB1287, and should fit into 4KB of bootloader space. If * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU * values in the accompanying makefile. * * NOTE: This device spoofs Atmel's DFU Bootloader USB VID and PID so that the Atmel DFU bootloader * drivers included with FLIP will work. If you do not wish to use Atmel's ID codes, please * manually change them in Descriptors.c and alter your driver's INF file accordingly. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * * * * * * * * *
Define Name:Location:Description:
SECURE_MODEBootloaderDFU.hIf defined to true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an * erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from * being dumped by unauthorized persons.
*/