/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Test Application for the LUFA library
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
*
*
*
USB Mode:
*
Host/Device (Dual Role)
*
*
*
USB Class:
*
N/A
*
*
*
USB Subclass:
*
N/A
*
*
*
Relevant Standards:
*
N/A
*
*
*
Usable Speeds:
*
Low Speed Mode, Full Speed Mode
*
*
*
* \section SSec_Description Project Description:
*
* Test application. Demonstrates several aspects of the LUFA
* Library. On start-up the current temperature will be printed
* through the USART every 10 seconds, and the current joystick
* position will be indicated via the LEDs on the selected board.
* Pressing the HWB will initiate the USB subsystem, enumerating
* the device (which has no actual functionality beyond
* enumeration as a device or as a host in this demo, and serves
* only to demonstrate the USB portion of the library). It will
* also suspend the joystick and temperature monitoring tasks.
*
* Pressing the HWB a second time will turn off the USB system
* and resume the temperature printing task (but not the joystick
* monitoring task).
*
* When activated, the USB events will be printed through the
* serial USART.
*
* When the USB subsystem is activated, the board LEDs will show
* the current USB status.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
*