/* LUFA Library Copyright (C) Dean Camera, 2013. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ /* Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaims all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ /** \file * * Header file for XPROGTarget.c. */ #ifndef _XPROG_TARGET_ #define _XPROG_TARGET_ /* Includes: */ #include #include #include #include #include "../V2Protocol.h" #include "XPROGProtocol.h" #include "Config/AppConfig.h" /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL #if !defined(ENABLE_XPROG_PROTOCOL) #define ENABLE_XPROG_PROTOCOL #endif #endif /** Serial carrier TPI/PDI speed in Hz, when hardware TPI/PDI mode is used. */ #define XPROG_HARDWARE_SPEED 2000000 /** Total number of bits in a single USART frame. */ #define BITS_IN_USART_FRAME 12 /** \name PDI Related Constants * @{ */ #define PDI_CMD_LDS(AddressSize, DataSize) (0x00 | ( AddressSize << 2) | DataSize) #define PDI_CMD_LD(PointerAccess, DataSize) (0x20 | (PointerAccess << 2) | DataSize) #define PDI_CMD_STS(AddressSize, DataSize) (0x40 | ( AddressSize << 2) | DataSize) #define PDI_CMD_ST(PointerAccess, DataSize) (0x60 | (PointerAccess << 2) | DataSize) #define PDI_CMD_LDCS(PDIReg) (0x80 | PDIReg) #define PDI_CMD_REPEAT(DataSize) (0xA0 | DataSize) #define PDI_CMD_STCS(PDIReg) (0xC0 | PDIReg) #define PDI_CMD_KEY 0xE0 #define PDI_REG_STATUS 0 #define PDI_REG_RESET 1 #define PDI_REG_CTRL 2 #define PDI_STATUS_NVM (1 << 1) #define PDI_RESET_KEY 0x59 #define PDI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF} #define PDI_DATASIZE_1BYTE 0 #define PDI_DATASIZE_2BYTES 1 #define PDI_DATASIZE_3BYTES 2 #define PDI_DATASIZE_4BYTES 3 #define PDI_POINTER_INDIRECT 0 #define PDI_POINTER_INDIRECT_PI 1 #define PDI_POINTER_DIRECT 2 /** @} */ /** \name TPI Related Constants * @{ */ #define TPI_CMD_SLD(PointerAccess) (0x20 | PointerAccess) #define TPI_CMD_SST(PointerAccess) (0x60 | PointerAccess) #define TPI_CMD_SSTPR 0x68 #define TPI_CMD_SIN(Address) (0x10 | ((Address & 0x30) << 1) | (Address & 0x0F)) #define TPI_CMD_SOUT(Address) (0x90 | ((Address & 0x30) << 1) | (Address & 0x0F)) #define TPI_CMD_SLDCS(TPIReg) (0x80 | TPIReg) #define TPI_CMD_SSTCS(TPIReg) (0xC0 | TPIReg) #define TPI_CMD_SKEY 0xE0 #define TPI_REG_STATUS 0x00 #define TPI_REG_CTRL 0x02 #define TPI_REG_ID 0x0F #define TPI_STATUS_NVM (1 << 1) #define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF} #define TPI_POINTER_INDIRECT 0 #define TPI_POINTER_INDIRECT_PI 4 /** @} */ /* Function Prototypes: */ void XPROGTarget_EnableTargetPDI(void); void XPROGTarget_EnableTargetTPI(void); void XPROGTarget_DisableTargetPDI(void); void XPROGTarget_DisableTargetTPI(void); void XPROGTarget_SendByte(const uint8_t Byte); uint8_t XPROGTarget_ReceiveByte(void); void XPROGTarget_SendIdle(void); bool XPROGTarget_WaitWhileNVMBusBusy(void); #if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL)) static void XPROGTarget_SetTxMode(void); static void XPROGTarget_SetRxMode(void); #endif #endif