/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage USB to Serial Converter Project * * \section SSec_Compat Project Compatibility: * * The following list indicates what microcontrollers are compatible with this project. * * - Series 7 USB AVRs (AT90USBxxx7) * - Series 6 USB AVRs (AT90USBxxx6) * - Series 4 USB AVRs (ATMEGAxxU4) * - Series 2 USB AVRs (AT90USBxx6, ATMEGAxxU2) * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this project. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Usable Speeds:Full Speed Mode
* * \section SSec_Description Project Description: * * USB to Serial bridge project. This project allows a USB AVR to serve * as a USB to USART bridge between a USB host and a device lacking a * USB port. When programmed into a USB AVR, the AVR will enumerate as a * virtual COM port. * * The AVR's hardware USART's settings will change to mirror as closely as * possible the serial settings set on the host. However, due to hardware * limitations, some options may not be supported (baud rates with unacceptable * error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits, * 1.5 stop bits, parity other than none, even or odd). * * After running this project for the first time on a new computer, * you will need to supply the .INF file located in this project * project's directory as the device's driver when running under * Windows. This will enable Windows to use its inbuilt CDC drivers, * negating the need for custom drivers for the device. Other * Operating Systems should automatically use their own inbuilt * CDC-ACM drivers. * * \section SSec_Options Project Options * * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * * * * * * * * * * * * *
Define Name:Location:Description:
BUFF_STATICSIZERingBuff.hDefines the maximum number of bytes which can be buffered in each Ring Buffer.
*/