/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage CDC Host Demo * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * - Series 7 USB AVRs (AT90USBxxx7) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Host</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>USBIF CDC Class Standard</td> * </tr> * <tr> * <td><b>Usable Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> * * \section Sec_Description Project Description: * * CDC host demonstration application. This gives a simple reference application * for implementing a USB CDC host, for CDC devices using the standard ACM profile. * * This demo prints out received CDC data through the serial port. * * Note that this demo is only compatible with devices which report the correct CDC * and ACM class, subclass and protocol values. Most USB-Serial cables have vendor * specific features, thus use vendor-specific class/subclass/protocol codes to force * the user to use specialized drivers. This demo is not compatible with such devices. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */