/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Teensy HID Class USB AVR Bootloader * * \section SSec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * - AT90USB162 (Teensy 1.0) * - ATMEGA32U4 (Teensy 2.0) * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Human Interface Device Class (HID)
USB Subclass:N/A
Relevant Standards:USBIF HID Class Standard \n * Teensy Programming Protocol Specification
Usable Speeds:Low Speed Mode \n * Full Speed Mode
* * \section SSec_Description Project Description: * * This bootloader enumerates to the host as a HID Class device, allowing for Teensy compatible programming * software to load firmware onto the AVR, such as the official software at http://www.pjrc.com/teensy/. * * Out of the box this bootloader builds for the ATMEGA32U4, and will fit into 2-4KB of bootloader space. For other * devices, the makefile will need to be updated to reflect the altered MCU model and bootloader start address. When * calculating the bootloader start address, use (TARGET_FLASH_SIZE_BYTES - 4096). * * This spoofs (with permission) the official Teensy bootloader's VID and PID, so that the software remains * compatible with no changes. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * *
* None *
*/