/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage HID Device Report Viewer Programmer Project * * \section Sec_Compat Project Compatibility: * * The following list indicates what microcontrollers are compatible with this project. * * \li Series 7 USB AVRs (AT90USBxxx7) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this project. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Host</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>USBIF HID Specification \n * USBIF HID Usage Tables</td> * </tr> * <tr> * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> * </table> * * \section Sec_Description Project Description: * * Firmware for a HID Report viewer. This project is designed to aid in the debugging of USB HID Hosts, where the contents of an * unknown HID device's HID Report need to be examined. Once a HID device has been plugged into this application, the HID report * descriptor will be parsed using the internal LUFA HID report parser, and the results dumped to the serial port in a human * readable format. This output will contain information on the sizes of the reports within the device's HID interface, as well as * information on each report element (size, usage, minimum/maximum values, etc.). * * \section Sec_Options Project Options * * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */