/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */
 
/** \mainpage uIP Powered Webserver Project
 *
 *  \section SSec_Compat Project Compatibility:
 *
 *  The following list indicates what microcontrollers are compatible with this project.
 *
 *  - Series 7 USB AVRs
 *
 *  \section SSec_Info USB Information:
 *
 *  The following table gives a rundown of the USB utilization of this project.
 *
 *  <table>
 *   <tr>
 *    <td><b>USB Mode:</b></td>
 *    <td>Dual Mode Host/Device</td>
 *   </tr>
 *   <tr>
 *    <td><b>USB Class:</b></td>
 *    <td>Communications Device Class (CDC) \n
 *        Mass Storage Device</td>
 *   </tr>
 *   <tr> 
 *    <td><b>USB Subclass:</b></td>
 *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard) \n
 *        Bulk-Only Transport</td>
 *   </tr>
 *   <tr>
 *    <td><b>Relevant Standards:</b></td>
 *    <td>Microsoft RNDIS Specification \n
 *        USBIF Mass Storage Standard \n
 *        USB Bulk-Only Transport Standard \n
 *        SCSI Primary Commands Specification \n
 *        SCSI Block Commands Specification</td>
 *   </tr>
 *   <tr>
 *    <td><b>Usable Speeds:</b></td>
 *    <td>Full Speed Mode</td>
 *   </tr>
 *  </table>
 *
 *  \section SSec_Description Project Description: 
 *
 *  Simple HTTP webserver project. This project combines the LUFA library with the uIP TCP/IP full network stack and FatFS
 *  library to create a RNDIS host capable of serving out HTTP webpages to multiple hosts simultaneously. This project
 *  demonstrates how the libraries can be combined into a robust network enabled application, with the addition of a RNDIS
 *  network device.
 *
 *  To use this project, plug the USB AVR into a computer, so that it enumerates as a standard Mass Storage device. Load
 *  HTML files onto the disk, so that they can be served out to clients -- the default file to serve should be called
 *  <i>index.htm</i>. Filenames must be in 8.3 format for them to be retrieved correctly by the webserver, and the total
 *  requested file path must be equal to or less than 50 characters.
 *
 *  When attached to a RNDIS class device, such as a USB (desktop) modem, the system will enumerate the device, set the
 *  appropriate parameters needed for connectivity and begin listening for new HTTP connections on port 80. The device IP,
 *  netmask and default gateway IP must be set to values appropriate for the RNDIS device being used for this project to 
 *  work, if the DHCP client is disabled (see \ref SSec_Options).
 *
 *  When properly configured, the webserver can be accessed from any HTTP webrowser by typing in the device's static or
 *  dynamically allocated IP address.
 *
 *  \section SSec_Options Project Options
 *
 *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
 *
 *  <table>
 *   <tr>
 *    <td><b>Define Name:</b></td>
 *    <td><b>Location:</b></td>
 *    <td><b>Description:</b></td>
 *   </tr>
 *   <tr>
 *    <td>ENABLE_DHCP</td>
 *    <td>Makefile CDEFS</td>
 *    <td>When defined, enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server.</td>
 *   </tr>
 *   <tr>
 *    <td>DEVICE_IP_ADDRESS</td>
 *    <td>Lib/uIPManagement.h</td>
 *    <td>IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP is not defined).</td>
 *   </tr>
 *   <tr>
 *    <td>DEVICE_NETMASK</td>
 *    <td>Lib/uIPManagement.h</td>
 *    <td>Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP is not defined).</td>
 *   </tr>
 *   <tr>
 *    <td>DEVICE_GATEWAY</td>
 *    <td>Lib/uIPManagement.h</td>
 *    <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP
 *        is not defined).</td>
 *   </tr>
 *  </table>
 */