| size | *Display size of the compiled application FLASH and SRAM segments. | *
| symbol-sizes | *Display a size-sorted list of symbols from the compiled application, in decimal bytes. | *
| check-source | *Display a list of input SRC source files which cannot be found (if any). | *
| lib | *Build and archive all source files into a library A binary file. | *
| all | *Build and link the application into ELF debug and HEX binary files. | *
| elf | *Build and link the application into an ELF debug file. | *
| hex | *Build and link the application and produce HEX and EEP binary files. | *
| lss | *Build and link the application and produce a LSS source code/assembly code mixed listing file. | *
| clean | *Remove all intermediatary files and binary output files. | *
| mostlyclean | *Remove all intermediatary files but preserve any binary output files. | *
| TARGET | *Name of the application output file prefix (e.g. TestApplication). | *
| ARCH | *Architecture of the target processor (see \ref Page_DeviceSupport). | *
| MCU | *Name of the Atmel processor model (e.g. at90usb1287). | *
| SRC | *List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files. | *
| F_USB | *Speed in Hz of the input clock frequency to the target's USB controller. | *
| LUFA_PATH | *Path to the LUFA library core, either relative or absolute (e.g. ../LUFA-000000/LUFA/). | *
| BOARD | *LUFA board hardware drivers to use (see \ref Page_DeviceSupport). | *
| OPTIMIZATION | *Optimization level to use when compiling source files (see GCC manual). | *
| C_STANDARD | *Version of the C standard to apply when compiling C++ source files (see GCC manual). | *
| CPP_STANDARD | *Version of the C++ standard to apply when compiling C++ source files (see GCC manual). | *
| F_CPU | *Speed of the processor CPU clock, in Hz. | *
| C_FLAGS | *Flags to pass to the C compiler only, after the automatically generated flags. | *
| CPP_FLAGS | *Flags to pass to the C++ compiler only, after the automatically generated flags. | *
| ASM_FLAGS | *Flags to pass to the assembler only, after the automatically generated flags. | *
| CC_FLAGS | *Common flags to pass to the compiler, assembler and linker, after the automatically generated flags. | *
| LD_FLAGS | *Flags to pass to the linker, after the automatically generated flags. | *
| OBJDIR | *Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used. * \note When this option is enabled, all source filenames must be unique. | *
| OBJECT_FILES | *List of additional object files that should be linked into the resulting binary. | *
| None | *
| None | *
| help | *Display build system help and configuration information. | *
| list_targets | *List all available build targets from the build system. | *
| list_modules | *List all available build modules from the build system. | *
| list_mandatory | *List all mandatory parameters required by the included modules. | *
| list_optional | *List all optional parameters required by the included modules. | *
| list_provided | *List all variables provided by the included modules. | *
| list_macros | *List all macros provided by the included modules. | *
| None | *
| None | *
| None | *
| None | *
| atprogram | *Program the device FLASH memory with the application's executable data. | *
| atprogram-ee | *Program the device EEPROM memory with the application's EEPROM data. | *
| MCU | *Name of the Atmel processor model (e.g. at90usb1287). | *
| TARGET | *Name of the application output file prefix (e.g. TestApplication). | *
| ATPROGRAM_PROGRAMMER | *Name of the Atmel programmer or debugger tool to communicate with (e.g. jtagice3). | *
| ATPROGRAM_INTERFACE | *Name of the programming interface to use when programming the target (e.g. spi). | *
| ATPROGRAM_PORT | *Name of the communication port to use when when programming with a serially connected tool (e.g. COM2). | *
| None | *
| None | *
| avrdude | *Program the device FLASH memory with the application's executable data. | *
| avrdude | *Program the device EEPROM memory with the application's EEPROM data. | *
| MCU | *Name of the Atmel processor model (e.g. at90usb1287). | *
| TARGET | *Name of the application output file prefix (e.g. TestApplication). | *
| AVRDUDE_PROGRAMMER | *Name of the programmer or debugger tool to communicate with (e.g. jtagicemkii). | *
| ATPROGRAM_PORT | *Name of the communication port to use when when programming with the connected tool (e.g. COM2, /dev/ttyUSB0 or usb). | *
| ATPROGRAM_FLAGS | *Additional flags to pass to avrdude when programming, applied after the automatically generated flags. | *
| None | *
| None | *
| cppcheck | *Statically analyze the project source code for issues. | *
| cppcheck-config | *Check the cppcheck configuration - scan source code and warn about missing header files and other issues. | *
| SRC | *List of source files to statically analyze. | *
| CPPCHECK_INCLUDES | *Path of extra directories to check when attemting to resolve C/C++ header file includes. | *
| CPPCHECK_EXCLUDES | *Paths or path fragments to exclude when analyzing. | *
| CPPCHECK_MSG_TEMPLATE | *Output message template to use when printing errors, warnings and information (see cppcheck documentation). | *
| CPPCHECK_ENABLE | *Analysis rule categories to enable (see cppcheck documentation). | *
| CPPCHECK_SUPPRESS | *Specific analysis rules to suppress (see cppcheck documentation). | *
| CPPCHECK_FAIL_ON_WARNING | *Set to Y to fail the analysis job with an error exit code if warnings are found, N to continue without failing. | *
| CPPCHECK_QUIET | *Set to Y to suppress all output except warnings and errors, N to show verbose output information. | *
| CPPCHECK_FLAGS | *Extra flags to pass to cppcheck, after the automatically generated flags. | *
| None | *
| None | *
| dfu | *Program the device FLASH memory with the application's executable data using dfu-programmer. | *
| dfu-ee | *Program the device EEPROM memory with the application's EEPROM data using dfu-programmer. | *
| flip | *Program the device FLASH memory with the application's executable data using batchisp. | *
| flip-ee | *Program the device EEPROM memory with the application's EEPROM data using batchisp. | *
| MCU | *Name of the Atmel processor model (e.g. at90usb1287). | *
| TARGET | *Name of the application output file prefix (e.g. TestApplication). | *
| None | *
| None | *
| None | *
| doxygen | *Generate project documentation. | *
| LUFA_PATH | *Path to the LUFA library core, either relative or absolute (e.g. ../LUFA-000000/LUFA/). | *
| DOXYGEN_CONF | *Name and path of the base Doxygen configuration file for the project. | *
| DOXYGEN_FAIL_ON_WARNING | *Set to Y to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, N to continue without failing. | *
| DOXYGEN_OVERRIDE_PARAMS | *Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. QUIET=YES). | *
| None | *
| None | *
| hid | *Program the device FLASH memory with the application's executable data using hid_bootloader_cli. | *
| hid-ee | *Program the device EEPROM memory with the application's EEPROM data using hid_bootloader_cli and * a temporary AVR application programmed into the target's FLASH. * \note This will erase the currently loaded application in the target. | *
| hid-teensy | *Program the device FLASH memory with the application's executable data using teensy_loader_cli. | *
| hid-teensy-ee | *Program the device EEPROM memory with the application's EEPROM data using teensy_loader_cli and * a temporary AVR application programmed into the target's FLASH. * \note This will erase the currently loaded application in the target. | *
| MCU | *Name of the Atmel processor model (e.g. at90usb1287). | *
| TARGET | *Name of the application output file prefix (e.g. TestApplication). | *
| None | *
| None | *
| None | *
| None | *
| LUFA_PATH | *Path to the LUFA library core, either relative or absolute (e.g. ../LUFA-000000/LUFA/). | *
| ARCH | *Architecture of the target processor (see \ref Page_DeviceSupport). | *
| None | *
| LUFA_SRC_USB | *List of LUFA USB driver source files. | *
| LUFA_SRC_USBCLASS | *List of LUFA USB Class driver source files. | *
| LUFA_SRC_TEMPERATURE | *List of LUFA temperature sensor driver source files. | *
| LUFA_SRC_SERIAL | *List of LUFA Serial U(S)ART driver source files. | *
| LUFA_SRC_TWI | *List of LUFA TWI driver source files. | *
| LUFA_SRC_PLATFORM | *List of LUFA architecture specific platform management source files. | *
| None | *