/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage CDC Class USB AVR Bootloader
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
*
*
*
USB Mode:
*
Device
*
*
*
USB Class:
*
Communications Device Class (CDC)
*
*
*
USB Subclass:
*
Abstract Control Model (ACM)
*
*
*
Relevant Standards:
*
USBIF CDC Class Standard
*
*
*
Usable Speeds:
*
Full Speed Mode
*
*
*
* \section SSec_Description Project Description:
*
* This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
* protocol compatible programming software to load firmware onto the AVR.
*
* Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
* you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
* values in the accompanying makefile.
*
* This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
*