You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/bfake
fauxpark 0bd03150e5
Remove NO_BACKLIGHT_CLOCK (#6418)
5 years ago
..
keymaps QMK Configurator Support (#2821) 7 years ago
bfake.c Add support for key backlighting to bfake 7 years ago
bfake.h Fix bfake matrix bug (#3180) 6 years ago
config.h Remove NO_BACKLIGHT_CLOCK (#6418) 5 years ago
i2c.c Splits up ps2avrGB boards into their own folders (#2014) 7 years ago
i2c.h Splits up ps2avrGB boards into their own folders (#2014) 7 years ago
info.json Fix bfake matrix bug (#3180) 6 years ago
matrix.c Splits up ps2avrGB boards into their own folders (#2014) 7 years ago
readme.md Modified URLs to point to new locations 6 years ago
rules.mk Add support for key backlighting to bfake 7 years ago
usbconfig.h Splits up ps2avrGB boards into their own folders (#2014) 7 years ago

readme.md

B.fake

A 60% keyboard with RGB. The B.fake pcb is a copy of the B.face PCB sold by winkeyless. However, the switch matrix is actually the same as the FaceW, a ps2avr PCB sold on mechanicalkeyboards.com.

Keyboard Maintainer: QMK Community
Hardware Supported: B.fake PCB
Hardware Availability: https://www.aliexpress.com/store/product/bface-60-RGB-underground-copy-pcb-from-china-gh60-pcb-Customize-keyboard-PCB/2230037_32731084597.html

Make example for this keyboard (after setting up your build environment):

make bfake:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python
    brew install pyusb
    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See build environment setup then the make instructions for more information.