You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/yosino58/keymaps/default/keymap.c

338 lines
15 KiB

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

#include QMK_KEYBOARD_H
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
RGBRST
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-----------------------------------------. ,-----------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | = |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* |LShift| A | S | D | F | G | | H | J | K | L | ; | ' |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* |LCTRL | Z | X | C | V | B |-------.-------. ,---------------| N | M | , | . | / | \ |
* `-----------------------------------------/ Del / / \ \ Bksp \----------------------------------------'
* | LAlt |ADJUST| /-------/ Space / \ Enter \-------\ | [ | ] |
* | | |/ LOWER / / \ \ RAISE \ | | |
* `-----------------------------' '------------------------------'
*/
[_QWERTY] = LAYOUT( \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_EQL, \
KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, \
KC_LALT, ADJUST, LOWER, RAISE, KC_LBRC, KC_RBRC\
),
/* LOWER
* ,-----------------------------------------. ,-----------------------------------------.
* | ESC | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | / | - | 7 | 8 | 9 | | ! | @ | # | $ | % | F12 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* |LShift| * | + | 4 | 5 | 6 | | ^ | & | * | ( | ) | - |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* |LCTRL | . | 0 | 1 | 2 | 3 |-------.-------. ,---------------| | _ | + | { | } | | |
* `-----------------------------------------/ F11 / / \ \ F12 \----------------------------------------'
* | LAlt | LGUI | /-------/ Space / \ Enter \-------\ | Caps | Num |
* | | |/ LOWER / / \ \ \ | | |
* `-----------------------------' '------------------------------'
*/
[_LOWER] = LAYOUT( \
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, \
_______, KC_PSLS, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_F12, \
_______, KC_PAST, KC_PPLS, KC_P4, KC_P5, KC_P6, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TILD, \
_______, KC_PDOT, KC_P0, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_LGUI, _______, XXXXXXX, KC_CLCK, KC_NLCK\
),
/* RAISE
* ,-----------------------------------------. ,-----------------------------------------.
* | | | | | | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | F1 | F2 | F3 | F4 | F5 | F6 | | | <20><> | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | F7 | F8 | F9 | F10 | F11 | F12 |-------.-------. ,---------------| <20><> | <20><> | <20><> | | | |
* `-----------------------------------------/ / / \ \ \----------------------------------------'
* | | | /-------/ Space / \ Enter \-------\ | | |
* | | |/ / / \ \ RAISE \ | | |
* `-----------------------------' '------------------------------'
*/
[_RAISE] = LAYOUT( \
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
XXXXXXX, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, \
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, _______, _______, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, \
XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX \
),
/* ADJUST
* ,-----------------------------------------. ,-----------------------------------------.
* |RESET | | | | | | | Mute | Vol+ | Play | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | PSCR | SLCK | Pause| | Prev | Vol- | Next | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | |Insert| Home |PageUP| | | |RGB ON| HUE+ | SAT+ | VAL+ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | Del | End |PageDN|-------.-------. ,---------------| |RGB Re| MODE | HUE- | SAT- | VAL- |
* `-----------------------------------------/ / / \ \ \----------------------------------------'
* | |ADJUST| /-------/ Space / \ Enter \-------\ | | |
* | | |/ / / \ \ \ | | |
* `-----------------------------' '------------------------------'
*/
[_ADJUST] = LAYOUT( \
RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, \
XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR, KC_SLCK, KC_PAUS, KC_MPRV, KC_VOLD, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, \
XXXXXXX, XXXXXXX, XXXXXXX, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL, KC_END, KC_PGDN, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, RGBRST, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \
XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
)
};
int RGB_current_mode;
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
#ifdef SSD1306_128X64
iota_gfx_init(false); // turns on the display
#else
iota_gfx_init(!has_usb()); // turns on the display
#endif
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
//assign the right code to your layers for OLED display
#define L_QWERTY 0
#define L_LOWER 2
#define L_RAISE 4
#define L_ADJUST 8
// When add source files to SRC in rules.mk, you can use functions.
const char *read_logo(void);
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
static char indctr[2][20][5]=
{
// white icon
{
{0x80,0x81,0x82,0x83,0},
{0x88,0x89,0x8A,0x8B,0},
{0x90,0x91,0x92,0x93,0},
{0x98,0x99,0x9A,0x9B,0},
{0x01,0x02,0x03,0x04,0},
{0xA0,0xA1,0xA2,0xA3,0},
{0xA8,0xA9,0xAA,0xAB,0},
{0xB0,0xB1,0xB2,0xB3,0},
{0xB8,0xB9,0xBA,0xBB,0},
{0x21,0x22,0x23,0x24,0},
{0xC0,0xC1,0xC2,0xC3,0},
{0xC8,0xC9,0xCA,0xCB,0},
{0xD0,0xD1,0xD2,0xD3,0},
{0xD8,0xD9,0xDA,0xDB,0},
{0x41,0x42,0x43,0x44,0},
{0xE0,0xE1,0xE2,0xE3,0},
{0xE8,0xE9,0xEA,0xEB,0},
{0xF0,0xF1,0xF2,0xF3,0},
{0xF8,0xF9,0xFA,0xFB,0},
{0x61,0x62,0x63,0x64,0}
},
// Black icon
{
{0x84,0x85,0x86,0x87,0},
{0x8C,0x8D,0x8E,0x8F,0},
{0x94,0x95,0x96,0x97,0},
{0x9C,0x9D,0x9E,0x9F,0},
{0x05,0x06,0x07,0x08,0},
{0xA4,0xA5,0xA6,0xA7,0},
{0xAC,0xAD,0xAE,0xAF,0},
{0xB4,0xB5,0xB6,0xB7,0},
{0xBC,0xBD,0xBE,0xBF,0},
{0x25,0x26,0x27,0x28,0},
{0xC4,0xC5,0xC6,0xC7,0},
{0xCC,0xCD,0xCE,0xCF,0},
{0xD4,0xD5,0xD6,0xD7,0},
{0xDC,0xDD,0xDE,0xDF,0},
{0x45,0x46,0x47,0x48,0},
{0xE4,0xE5,0xE6,0xE7,0},
{0xEC,0xED,0xEE,0xEF,0},
{0xF4,0xF5,0xF6,0xF7,0},
{0xFC,0xFD,0xFE,0xFF,0},
{0x65,0x66,0x67,0x68,0}
}
};
int rown = 0;
int rowc = 0;
int rowl = 0;
int rowr = 0;
int rowa = 0;
//Set Indicator icon
if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 1; } else { rown = 0; }
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowc = 1; } else { rowc = 0; }
if (layer_state == L_LOWER) { rowl = 1; }
if (layer_state == L_RAISE) { rowr = 1; }
if (layer_state == L_ADJUST) { rowa = 1; }
matrix_write(matrix, indctr[rowl] [0]);
matrix_write(matrix, indctr[rowr] [1]);
matrix_write(matrix, indctr[rowa] [2]);
matrix_write(matrix, indctr[rowc] [3]);
matrix_write(matrix, indctr[rown] [4]);
matrix_write_char(matrix, 0x13);
matrix_write(matrix, indctr[rowl] [5]);
matrix_write(matrix, indctr[rowr] [6]);
matrix_write(matrix, indctr[rowa] [7]);
matrix_write(matrix, indctr[rowc] [8]);
matrix_write(matrix, indctr[rown] [9]);
matrix_write_char(matrix, 0x13);
matrix_write(matrix, indctr[rowl] [10]);
matrix_write(matrix, indctr[rowr] [11]);
matrix_write(matrix, indctr[rowa] [12]);
matrix_write(matrix, indctr[rowc] [13]);
matrix_write(matrix, indctr[rown] [14]);
matrix_write_char(matrix, 0x13);
matrix_write(matrix, indctr[rowl] [15]);
matrix_write(matrix, indctr[rowr] [16]);
matrix_write(matrix, indctr[rowa] [17]);
matrix_write(matrix, indctr[rowc] [18]);
matrix_write(matrix, indctr[rown] [19]);
}else{
matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
} else {
layer_off(_LOWER);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
} else {
layer_off(_RAISE);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}