You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/donutcables/budget96
MechMerlin f698f1e3f4
[Keyboard] Add Budget96 by Donut Cables (#5550)
6 years ago
..
keymaps/default [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
budget96.c [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
budget96.h [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
config.h [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
i2c.c [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
i2c.h [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
info.json [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
readme.md [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
rules.mk [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago
usbconfig.h [Keyboard] Add Budget96 by Donut Cables (#5550) 6 years ago

readme.md

budget96

96 key atmega32a keyboard.

Keyboard Maintainer: MechMerlin
Hardware Supported: Budget96 PCB
Hardware Availability: DonutCables

Make example for this keyboard (after setting up your build environment):

make donutcables/budget96:default

Flashing

Reset Key: Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at K50, commonly programmed as the Esc key.

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.