![]() |
11 years ago | |
---|---|---|
.. | ||
doc | 12 years ago | |
Makefile | 11 years ago | |
Makefile.pjrc | 11 years ago | |
README.md | 11 years ago | |
config.h | 11 years ago | |
keymap.c | 12 years ago | |
keymap_hasu.c | 11 years ago | |
led.c | 12 years ago | |
matrix.c | 12 years ago |
README.md
M0110/M0110A to USB keyboard converter
This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
Target board of this project is PJRC Teensy, though,
you can use other board with USB AVR like ATmega32U4
and AT90USB
.
- M0110A support was contributed by skagon@github.
- M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys.
Update
- 2013/08 Change port for signals PF to PD
Connection
You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
Teensy port PD0
is assigned for CLOCK
line and PD1
for DATA
by default,
you can change pin configuration with editing config.h.
You can find 4P4C plugs on telephone handset cable. Note that it is crossover connection while Macintosh keyboard cable is straight.
In this pic:
GND
(Black)CLOCK
(Red)DATA
(Green)+5V
(Yellow)
Note that wire colors may vary in your cable.
Pinout
- http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml
- http://en.wikipedia.org/wiki/Modular_connector#4P4C
Pull-up Registor
You may need pull-up registors on signal lines(CLOCK
, DATA
) in particular
when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
Building Frimware
To compile firmware you need AVR GCC. You can use WinAVR on Windows. You can edit Makefile and config.h to change compile options and pin configuration.
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
$ cd m0110_usb
$ make -f Makefile clean
$ make -f Makefile
and program your Teensy with PJRC Teensy loader.
Keymap
You can change keymaps by editing keymap.c.
M0110 & M0120
Default
,---------------------------------------------------------. ,---------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| -|Lft|Rgt|
|---------------------------------------------------------| |---------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up|
|---------------------------------------------------------| |---------------|
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| Dn|
|---------------------------------------------------------| |---------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
`---------------------------------------------------------' |-----------|Ent|
|Ctl|Alt | Space |Gui |Ctl| | 0| .| |
`-----------------------------------------------' `---------------'
HHKB/WASD Layer(WASD/IJKL)
,---------------------------------------------------------. ,---------------.
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt|
|---------------------------------------------------------| |---------------|
|Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau|Ins| | 7| 8| 9| Up|
|---------------------------------------------------------| |---------------|
|Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| Dn|
|---------------------------------------------------------| |---------------|
|Shift |End| |PgD| | | |PgD| |End| |Shift | | 1| 2| 3| |
`---------------------------------------------------------' |-----------|Ent|
|Ctl|Alt | Space |Gui |Ctl| | 0| .| |
`-----------------------------------------------' `---------------'
M0110A
Default
,---------------------------------------------------------. ,---------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| =| /| *|
|---------------------------------------------------------| |---------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
|-----------------------------------------------------' | |---------------|
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
|---------------------------------------------------------| |---------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft| Up| | 1| 2| 3| |
|---------------------------------------------------------| |-----------|Ent|
|Alt |Gui | Space | \|Lft|Rgt| Dn| | 0| .| |
`---------------------------------------------------------' `---------------'
Cursor Layer(WASD/IJKL)
,---------------------------------------------------------. ,---------------.
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
|---------------------------------------------------------| |---------------|
|Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau| | | 7| 8| 9| -|
|-----------------------------------------------------' | |---------------|
|Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| +|
|---------------------------------------------------------| |---------------|
|Shift |End| |PgD| | | |PgD| |End| |Shif|PgU| | 1| 2| 3| |
|---------------------------------------------------------| |-----------|Ent|
|Alt |Gui | Space |Ins|Hom|End|PgD| | 0| .| |
`---------------------------------------------------------' `---------------'
Debug
You can use PJRC HID listen to see debug output.
The converter has some functions for debug, press <magickey>+H
simultaneously to get help.
These function is totally undocumented, tentative, inconsistent and buggy.
magickey: Shift+Option+Command(Shift+Alt+Gui or Shift+Alt+Control)