You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Demos/Device/Mouse/Mouse.txt

69 lines
2.2 KiB

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mouse Device Demo
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Mouse demonstration application. This gives a simple reference
* application for implementing a USB Mouse using the basic USB HID
* drivers in all modern OSes (i.e. no special drivers required). It is
* boot protocol compatible, and thus works under compatible BIOS as if
* it was a native mouse (e.g. PS/2).
*
* On start-up the system will automatically enumerate and function
* as a mouse when the USB connection to a host is present. To use
* the mouse, move the joystick to move the pointer, and push the
* joystick inwards to simulate a left-button click. The HWB serves as
* the right mouse button.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td><b>Define Name:</b></td>
* <td><b>Location:</b></td>
* <td><b>Description:</b></td>
* </tr>
* <tr>
* <td>INTERRUPT_CONTROL_ENDPOINT</td>
* <td>Makefile CDEFS</td>
* <td>When defined, this causes the demo to enable interrupts for the control endpoint,
* which services control requests from the host. If not defined, the control endpoint
* is serviced via polling using the task scheduler.</td>
* </tr>
* </table>
*/